Merge pull request #60 from Nick-Shadow/main

Adds $SCRIPTHOME var, replacing hardcoded file paths

.gitignore

@@ -1,2 +1,3 @@
 install.conf
-installlog.txt
+installlog.txt
+archnikus.code-workspace

0-preinstall.sh

@@ -106,17 +106,15 @@ echo "--------------------------------------"
 pacstrap /mnt base base-devel linux linux-firmware vim nano sudo archlinux-keyring wget libnewt --noconfirm --needed
 genfstab -U /mnt >> /mnt/etc/fstab
 echo "keyserver hkp://keyserver.ubuntu.com" >> /mnt/etc/pacman.d/gnupg/gpg.conf
-echo "--------------------------------------"
-echo "-- GRUB Bootloader Installation     --"
-echo "--------------------------------------"
-if [[ ! -d "/sys/firmware/efi" ]]; then
-    grub-install --boot-directory=/mnt/boot ${DISK}
-else
-    grub-install --efi-directory=/mnt/boot ${DISK}
-fi
 cp -R ${SCRIPT_DIR} /mnt/root/ArchTitus
 cp /etc/pacman.d/mirrorlist /mnt/etc/pacman.d/mirrorlist
 echo "--------------------------------------"
+echo "--GRUB BIOS Bootloader Install&Check--"
+echo "--------------------------------------"
+if [[ ! -d "/sys/firmware/efi" ]]; then
+    grub-install --boot-directory=/boot ${DISK}
+fi
+echo "--------------------------------------"
 echo "-- Check for low memory systems <8G --"
 echo "--------------------------------------"
 TOTALMEM=$(cat /proc/meminfo | grep -i 'memtotal' | grep -o '[[:digit:]]*')
@@ -133,5 +131,5 @@ if [[  $TOTALMEM -lt 8000000 ]]; then
     echo "/opt/swap/swapfile	none	swap	sw	0	0" >> /mnt/etc/fstab #Add swap to fstab, so it KEEPS working after installation.
 fi
 echo "--------------------------------------"
-echo "--   SYSTEM READY FOR 0-setup       --"
+echo "--   SYSTEM READY FOR 1-setup       --"
 echo "--------------------------------------"

1-setup.sh

@@ -25,9 +25,9 @@ echo "-------------------------------------------------"
 echo "Changing the makeflags for "$nc" cores."
 TOTALMEM=$(cat /proc/meminfo | grep -i 'memtotal' | grep -o '[[:digit:]]*')
 if [[  $TOTALMEM -gt 8000000 ]]; then
-sudo sed -i 's/#MAKEFLAGS="-j2"/MAKEFLAGS="-j$nc"/g' /etc/makepkg.conf
+sed -i "s/#MAKEFLAGS=\"-j2\"/MAKEFLAGS=\"-j$nc\"/g" /etc/makepkg.conf
 echo "Changing the compression settings for "$nc" cores."
-sudo sed -i 's/COMPRESSXZ=(xz -c -z -)/COMPRESSXZ=(xz -c -T $nc -z -)/g' /etc/makepkg.conf
+sed -i "s/COMPRESSXZ=(xz -c -z -)/COMPRESSXZ=(xz -c -T $nc -z -)/g" /etc/makepkg.conf
 fi
 echo "-------------------------------------------------"
 echo "       Setup Language to US and set locale       "
@@ -96,7 +96,7 @@ PKGS=(
 'egl-wayland'
 'exfat-utils'
 'extra-cmake-modules'
-'filelite'
+'filelight'
 'flex'
 'fuse2'
 'fuse3'
@@ -236,14 +236,14 @@ fi
 echo -e "\nDone!\n"
 if ! source install.conf; then
 	read -p "Please enter username:" username
-echo "username=$username" >> ${HOME}/ArchTitus/install.conf
+echo "username=$username" >> ${HOME}/$SCRIPTHOME/install.conf
 fi
 if [ $(whoami) = "root"  ];
 then
     useradd -m -G wheel,libvirt -s /bin/bash $username 
 	passwd $username
-	cp -R /root/ArchTitus /home/$username/
-    chown -R $username: /home/$username/ArchTitus
+	cp -R /root/$SCRIPTHOME /home/$username/
+    chown -R $username: /home/$username/$SCRIPTHOME
 	read -p "Please name your machine:" nameofmachine
 	echo $nameofmachine > /etc/hostname
 else

2-user.sh

@@ -56,9 +56,9 @@ for PKG in "${PKGS[@]}"; do
 done
 
 export PATH=$PATH:~/.local/bin
-cp -r $HOME/ArchTitus/dotfiles/* $HOME/.config/
+cp -r $HOME/$SCRIPTHOME/dotfiles/* $HOME/.config/
 pip install konsave
-konsave -i $HOME/ArchTitus/kde.knsv
+konsave -i $HOME/$SCRIPTHOME/kde.knsv
 sleep 1
 konsave -a kde
 

3-post-setup.sh

@@ -9,7 +9,12 @@
 #-------------------------------------------------------------------------
 
 echo -e "\nFINAL SETUP AND CONFIGURATION"
-
+echo "--------------------------------------"
+echo "-- GRUB EFI Bootloader Install&Check--"
+echo "--------------------------------------"
+if [[ -d "/sys/firmware/efi" ]]; then
+    grub-install --efi-directory=/boot ${DISK}
+fi
 grub-mkconfig -o /boot/grub/grub.cfg
 
 # ------------------------------------------------------------------------
@@ -45,8 +50,3 @@ sed -i 's/^# %wheel ALL=(ALL) ALL/%wheel ALL=(ALL) ALL/' /etc/sudoers
 
 # Replace in the same state
 cd $pwd
-echo "
-###############################################################################
-# Done - Please Eject Install Media and Reboot
-###############################################################################
-"

LICENSE

@@ -0,0 +1,21 @@
+MIT License
+
+Copyright (c) 2021 Chris Titus
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

README.md

@@ -31,9 +31,15 @@ __[Arch Linux Installation Guide](https://github.com/rickellis/Arch-Linux-Instal
 
 ### No Wifi
 
-```bash
-sudo wifi-menu
-```
+#1: Run `iwctl`
+
+#2: Run `device list`, and find your device name.
+
+#3: Run `station [device name] scan`
+
+#4: Run `station [device name] get-networks`
+
+#5: Find your network, and run `station [device name] connect [network name]`, enter your password and run `exit`. You can test if you have internet connection by running `ping google.com`. 
 
 ## Credits
 

archtitus.sh

@@ -1,7 +1,17 @@
 #!/bin/bash
 
+# Find the name of the folder the scripts are in
+export SCRIPTHOME="$(basename -- $PWD)"
+echo "Scripts are in dir named $SCRIPTHOME"
+
     bash 0-preinstall.sh
-    arch-chroot /mnt /root/ArchTitus/1-setup.sh
-    source /mnt/root/ArchTitus/install.conf
-    arch-chroot /mnt /usr/bin/runuser -u $username -- /home/$username/ArchTitus/2-user.sh
-    arch-chroot /mnt /root/ArchTitus/3-post-setup.sh
+    arch-chroot /mnt /root/$SCRIPTHOME/1-setup.sh
+    source /mnt/root/$SCRIPTHOME/install.conf
+    arch-chroot /mnt /usr/bin/runuser -u $username -- /home/$username/$SCRIPTHOME/2-user.sh
+    arch-chroot /mnt /root/$SCRIPTHOME/3-post-setup.sh
+
+echo "
+###############################################################################
+# Done - Please Eject Install Media and Reboot
+###############################################################################
+"

kderice-backup.sh

@@ -1,5 +1,5 @@
 #!/bin/bash
 
-cp -r $HOME/.config/kitty $HOME/ArchTitus/dotfiles/kitty
+cp -r $HOME/.config/kitty $HOME/$SCRIPTHOME/dotfiles/kitty
 konsave -s kde
 konsave -e kde

kderice-restore.sh

@@ -1,8 +1,8 @@
 #!/bin/bash
 
 export PATH=$PATH:~/.local/bin
-cp -r $HOME/ArchTitus/dotfiles/* $HOME/.config/
+cp -r $HOME/$SCRIPTHOME/dotfiles/* $HOME/.config/
 pip install konsave
-konsave -i $HOME/ArchTitus/kde.knsv
+konsave -i $HOME/$SCRIPTHOME/kde.knsv
 sleep 1
 konsave -a kde