diff --git a/.gitignore b/.gitignore
index 8e189eb..a20aba1 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,3 +1,4 @@
 install.conf
 installlog.txt
-archnikus.code-workspace
\ No newline at end of file
+archnikus.code-workspace
+setup.conf
\ No newline at end of file
diff --git a/0-preinstall.sh b/0-preinstall.sh
index d789a3a..ddc03c9 100755
--- a/0-preinstall.sh
+++ b/0-preinstall.sh
@@ -8,9 +8,21 @@
 #  ╚═╝  ╚═╝╚═╝  ╚═╝ ╚═════╝╚═╝  ╚═╝   ╚═╝   ╚═╝   ╚═╝    ╚═════╝ ╚══════╝
 #-------------------------------------------------------------------------
 SCRIPT_DIR="$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"
-echo "-------------------------------------------------"
-echo "Setting up mirrors for optimal download          "
-echo "-------------------------------------------------"
+echo -ne "
+-------------------------------------------------------------------------
+   █████╗ ██████╗  ██████╗██╗  ██╗████████╗██╗████████╗██╗   ██╗███████╗
+  ██╔══██╗██╔══██╗██╔════╝██║  ██║╚══██╔══╝██║╚══██╔══╝██║   ██║██╔════╝
+  ███████║██████╔╝██║     ███████║   ██║   ██║   ██║   ██║   ██║███████╗
+  ██╔══██║██╔══██╗██║     ██╔══██║   ██║   ██║   ██║   ██║   ██║╚════██║
+  ██║  ██║██║  ██║╚██████╗██║  ██║   ██║   ██║   ██║   ╚██████╔╝███████║
+  ╚═╝  ╚═╝╚═╝  ╚═╝ ╚═════╝╚═╝  ╚═╝   ╚═╝   ╚═╝   ╚═╝    ╚═════╝ ╚══════╝
+-------------------------------------------------------------------------
+                    Automated Arch Linux Installer
+-------------------------------------------------------------------------
+
+Setting up mirrors for optimal download
+"
+source setup.conf
 iso=$(curl -4 ifconfig.co/country-iso)
 timedatectl set-ntp true
 pacman -S --noconfirm pacman-contrib terminus-font
@@ -18,39 +30,24 @@ setfont ter-v22b
 sed -i 's/^#Para/Para/' /etc/pacman.conf
 pacman -S --noconfirm reflector rsync grub
 cp /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.backup
-echo -e "-------------------------------------------------------------------------"
-echo -e "   █████╗ ██████╗  ██████╗██╗  ██╗████████╗██╗████████╗██╗   ██╗███████╗"
-echo -e "  ██╔══██╗██╔══██╗██╔════╝██║  ██║╚══██╔══╝██║╚══██╔══╝██║   ██║██╔════╝"
-echo -e "  ███████║██████╔╝██║     ███████║   ██║   ██║   ██║   ██║   ██║███████╗"
-echo -e "  ██╔══██║██╔══██╗██║     ██╔══██║   ██║   ██║   ██║   ██║   ██║╚════██║"
-echo -e "  ██║  ██║██║  ██║╚██████╗██║  ██║   ██║   ██║   ██║   ╚██████╔╝███████║"
-echo -e "  ╚═╝  ╚═╝╚═╝  ╚═╝ ╚═════╝╚═╝  ╚═╝   ╚═╝   ╚═╝   ╚═╝    ╚═════╝ ╚══════╝"
-echo -e "-------------------------------------------------------------------------"
-echo -e "-Setting up $iso mirrors for faster downloads"
-echo -e "-------------------------------------------------------------------------"
-
+echo -ne "
+-------------------------------------------------------------------------
+                    Setting up $iso mirrors for faster downloads
+-------------------------------------------------------------------------
+"
 reflector -a 48 -c $iso -f 5 -l 20 --sort rate --save /etc/pacman.d/mirrorlist
-mkdir /mnt
-
-
-echo -e "\nInstalling prereqs...\n$HR"
+mkdir /mnt &>/dev/null # Hiding error message if any
+echo -ne "
+-------------------------------------------------------------------------
+                    Installing Prerequisites
+-------------------------------------------------------------------------
+"
 pacman -S --noconfirm gptfdisk btrfs-progs
-
-echo "-------------------------------------------------"
-echo "-------select your disk to format----------------"
-echo "-------------------------------------------------"
-lsblk
-echo "Please enter disk to work on: (example /dev/sda)"
-read DISK
-echo "THIS WILL FORMAT AND DELETE ALL DATA ON THE DISK"
-read -p "are you sure you want to continue (Y/N):" formatdisk
-case $formatdisk in
-
-y|Y|yes|Yes|YES)
-echo "--------------------------------------"
-echo -e "\nFormatting disk...\n$HR"
-echo "--------------------------------------"
-
+echo -ne "
+-------------------------------------------------------------------------
+                    Formating Disk
+-------------------------------------------------------------------------
+"
 # disk prep
 sgdisk -Z ${DISK} # zap all on disk
 sgdisk -a 2048 -o ${DISK} # new gpt disk 2048 alignment
@@ -59,35 +56,91 @@ sgdisk -a 2048 -o ${DISK} # new gpt disk 2048 alignment
 sgdisk -n 1::+1M --typecode=1:ef02 --change-name=1:'BIOSBOOT' ${DISK} # partition 1 (BIOS Boot Partition)
 sgdisk -n 2::+100M --typecode=2:ef00 --change-name=2:'EFIBOOT' ${DISK} # partition 2 (UEFI Boot Partition)
 sgdisk -n 3::-0 --typecode=3:8300 --change-name=3:'ROOT' ${DISK} # partition 3 (Root), default start, remaining
-if [[ ! -d "/sys/firmware/efi" ]]; then
+if [[ ! -d "/sys/firmware/efi" ]]; then # Checking for bios system
     sgdisk -A 1:set:2 ${DISK}
 fi
-
 # make filesystems
-echo -e "\nCreating Filesystems...\n$HR"
-if [[ ${DISK} =~ "nvme" ]]; then
-mkfs.vfat -F32 -n "EFIBOOT" "${DISK}p2"
-mkfs.btrfs -L "ROOT" "${DISK}p3" -f
-mount -t btrfs "${DISK}p3" /mnt
+echo -ne "
+-------------------------------------------------------------------------
+                    Creating Filesystems
+-------------------------------------------------------------------------
+"
+createsubvolumes () {
+    btrfs subvolume create /mnt/@
+    btrfs subvolume create /mnt/@home
+    btrfs subvolume create /mnt/@var
+    btrfs subvolume create /mnt/@tmp
+    btrfs subvolume create /mnt/@.snapshots
+}
+
+mountallsubvol () {
+    mount -o noatime,compress=zstd,space_cache,commit=120,subvol=@home /dev/mapper/ROOT /mnt/home
+    mount -o noatime,compress=zstd,space_cache,commit=120,subvol=@tmp /dev/mapper/ROOT /mnt/tmp
+    mount -o noatime,compress=zstd,space_cache,commit=120,subvol=@.snapshots /dev/mapper/ROOT /mnt/.snapshots
+    mount -o subvol=@var /dev/mapper/ROOT /mnt/var
+}
+if [[ "${DISK}" == "nvme" ]]; then
+    if [[ "${FS}" == "btrfs" ]]; then
+        mkfs.vfat -F32 -n "EFIBOOT" ${DISK}p2
+        mkfs.btrfs -L ROOT ${DISK}p3 -f
+        mount -t btrfs ${DISK}p3 /mnt
+    elif [[ "${FS}" == "ext4" ]]; then
+        mkfs.vfat -F32 -n "EFIBOOT" ${DISK}p2
+        mkfs.ext4 -L ROOT ${DISK}p3
+        mount -t ext4 ${DISK}p3 /mnt
+    elif [[ "${FS}" == "luks" ]]; then
+        mkfs.vfat -F32 -n "EFIBOOT" ${DISK}p2
+# enter luks password to cryptsetup and format root partition
+        echo -n "${luks_password}" | cryptsetup -y -v luksFormat ${DISK}p3 -
+# open luks container and ROOT will be place holder 
+        echo -n "${luks_password}" | cryptsetup open ${DISK}p3 ROOT -
+# now format that container
+        mkfs.btrfs -L ROOT /dev/mapper/ROOT
+# create subvolumes for btrfs
+        mount -t btrfs /dev/mapper/ROOT /mnt
+        createsubvolumes       
+        umount /mnt
+# mount @ subvolume
+        mount -o noatime,compress=zstd,space_cache,commit=120,subvol=@ /dev/mapper/ROOT /mnt
+# make directories home, .snapshots, var, tmp
+        mkdir -p /mnt/{home,var,tmp,.snapshots}
+# mount subvolumes
+        mountallsubvol
+    fi
 else
-mkfs.vfat -F32 -n "EFIBOOT" "${DISK}2"
-mkfs.btrfs -L "ROOT" "${DISK}3" -f
-mount -t btrfs "${DISK}3" /mnt
+    if [[ "${FS}" == "btrfs" ]]; then
+        mkfs.vfat -F32 -n "EFIBOOT" ${DISK}2
+        mkfs.btrfs -f -L ROOT ${DISK}3
+        mount -t btrfs ${DISK}3 /mnt
+    elif [[ "${FS}" == "ext4" ]]; then
+        mkfs.vfat -F32 -n "EFIBOOT" ${DISK}2
+        mkfs.ext4 -L ROOT ${DISK}3
+        mount -t ext4 ${DISK}3 /mnt
+    elif [[ "${FS}" == "luks" ]]; then
+        mkfs.vfat -F32 -n "EFIBOOT" ${DISK}2
+        echo -n "${luks_password}" | cryptsetup -y -v luksFormat ${DISK}3 -
+        echo -n "${luks_password}" | cryptsetup open ${DISK}3 ROOT -
+        mkfs.btrfs -L ROOT /dev/mapper/ROOT
+        mount -t btrfs /dev/mapper/ROOT /mnt
+        createsubvolumes
+        umount /mnt
+# mount all the subvolumes
+        mount -o noatime,compress=zstd,space_cache,commit=120,subvol=@ /dev/mapper/ROOT /mnt
+# make directories home, .snapshots, var, tmp
+        mkdir -p /mnt/{home,var,tmp,.snapshots}
+# mount subvolumes
+        mountallsubvol
+    fi
 fi
+# checking if user selected btrfs
+if [[ ${FS} =~ "btrfs" ]]; then
 ls /mnt | xargs btrfs subvolume delete
 btrfs subvolume create /mnt/@
 umount /mnt
-;;
-*)
-echo "Rebooting in 3 Seconds ..." && sleep 1
-echo "Rebooting in 2 Seconds ..." && sleep 1
-echo "Rebooting in 1 Second ..." && sleep 1
-reboot now
-;;
-esac
+mount -t btrfs -o subvol=@ -L ROOT /mnt
+fi
 
 # mount target
-mount -t btrfs -o subvol=@ -L ROOT /mnt
 mkdir /mnt/boot
 mkdir /mnt/boot/efi
 mount -t vfat -L EFIBOOT /mnt/boot/
@@ -99,24 +152,29 @@ if ! grep -qs '/mnt' /proc/mounts; then
     echo "Rebooting in 1 Second ..." && sleep 1
     reboot now
 fi
-
-echo "--------------------------------------"
-echo "-- Arch Install on Main Drive       --"
-echo "--------------------------------------"
+echo -ne "
+-------------------------------------------------------------------------
+                    Arch Install on Main Drive
+-------------------------------------------------------------------------
+"
 pacstrap /mnt base base-devel linux linux-firmware vim nano sudo archlinux-keyring wget libnewt --noconfirm --needed
 genfstab -U /mnt >> /mnt/etc/fstab
 echo "keyserver hkp://keyserver.ubuntu.com" >> /mnt/etc/pacman.d/gnupg/gpg.conf
 cp -R ${SCRIPT_DIR} /mnt/root/ArchTitus
 cp /etc/pacman.d/mirrorlist /mnt/etc/pacman.d/mirrorlist
-echo "--------------------------------------"
-echo "--GRUB BIOS Bootloader Install&Check--"
-echo "--------------------------------------"
+echo -ne "
+-------------------------------------------------------------------------
+                    GRUB BIOS Bootloader Install & Check
+-------------------------------------------------------------------------
+"
 if [[ ! -d "/sys/firmware/efi" ]]; then
     grub-install --boot-directory=/mnt/boot ${DISK}
 fi
-echo "--------------------------------------"
-echo "-- Check for low memory systems <8G --"
-echo "--------------------------------------"
+echo -ne "
+-------------------------------------------------------------------------
+                    Checking for low memory systems <8G
+-------------------------------------------------------------------------
+"
 TOTALMEM=$(cat /proc/meminfo | grep -i 'memtotal' | grep -o '[[:digit:]]*')
 if [[  $TOTALMEM -lt 8000000 ]]; then
     #Put swap into the actual system, not into RAM disk, otherwise there is no point in it, it'll cache RAM into RAM. So, /mnt/ everything.
@@ -130,6 +188,8 @@ if [[  $TOTALMEM -lt 8000000 ]]; then
     #The line below is written to /mnt/ but doesn't contain /mnt/, since it's just / for the sysytem itself.
     echo "/opt/swap/swapfile	none	swap	sw	0	0" >> /mnt/etc/fstab #Add swap to fstab, so it KEEPS working after installation.
 fi
-echo "--------------------------------------"
-echo "--   SYSTEM READY FOR 1-setup       --"
-echo "--------------------------------------"
+echo -ne "
+-------------------------------------------------------------------------
+                    SYSTEM READY FOR 1-setup.sh
+-------------------------------------------------------------------------
+"
\ No newline at end of file
diff --git a/1-setup.sh b/1-setup.sh
index ada72c7..1633cda 100755
--- a/1-setup.sh
+++ b/1-setup.sh
@@ -1,45 +1,59 @@
 #!/usr/bin/env bash
-#-------------------------------------------------------------------------
-#   █████╗ ██████╗  ██████╗██╗  ██╗████████╗██╗████████╗██╗   ██╗███████╗
-#  ██╔══██╗██╔══██╗██╔════╝██║  ██║╚══██╔══╝██║╚══██╔══╝██║   ██║██╔════╝
-#  ███████║██████╔╝██║     ███████║   ██║   ██║   ██║   ██║   ██║███████╗
-#  ██╔══██║██╔══██╗██║     ██╔══██║   ██║   ██║   ██║   ██║   ██║╚════██║
-#  ██║  ██║██║  ██║╚██████╗██║  ██║   ██║   ██║   ██║   ╚██████╔╝███████║
-#  ╚═╝  ╚═╝╚═╝  ╚═╝ ╚═════╝╚═╝  ╚═╝   ╚═╝   ╚═╝   ╚═╝    ╚═════╝ ╚══════╝
-#-------------------------------------------------------------------------
-echo "--------------------------------------"
-echo "--          Network Setup           --"
-echo "--------------------------------------"
+echo -ne "
+-------------------------------------------------------------------------
+   █████╗ ██████╗  ██████╗██╗  ██╗████████╗██╗████████╗██╗   ██╗███████╗
+  ██╔══██╗██╔══██╗██╔════╝██║  ██║╚══██╔══╝██║╚══██╔══╝██║   ██║██╔════╝
+  ███████║██████╔╝██║     ███████║   ██║   ██║   ██║   ██║   ██║███████╗
+  ██╔══██║██╔══██╗██║     ██╔══██║   ██║   ██║   ██║   ██║   ██║╚════██║
+  ██║  ██║██║  ██║╚██████╗██║  ██║   ██║   ██║   ██║   ╚██████╔╝███████║
+  ╚═╝  ╚═╝╚═╝  ╚═╝ ╚═════╝╚═╝  ╚═╝   ╚═╝   ╚═╝   ╚═╝    ╚═════╝ ╚══════╝
+-------------------------------------------------------------------------
+                    Automated Arch Linux Installer
+-------------------------------------------------------------------------
+"
+source setup.conf
+echo -ne "
+-------------------------------------------------------------------------
+                    Network Setup 
+-------------------------------------------------------------------------
+"
 pacman -S networkmanager dhclient --noconfirm --needed
 systemctl enable --now NetworkManager
-echo "-------------------------------------------------"
-echo "Setting up mirrors for optimal download          "
-echo "-------------------------------------------------"
+echo -ne "
+-------------------------------------------------------------------------
+                    Setting up mirrors for optimal download 
+-------------------------------------------------------------------------
+"
 pacman -S --noconfirm pacman-contrib curl
 pacman -S --noconfirm reflector rsync
 cp /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.bak
 
 nc=$(grep -c ^processor /proc/cpuinfo)
-echo "You have " $nc" cores."
-echo "-------------------------------------------------"
-echo "Changing the makeflags for "$nc" cores."
+echo -ne "
+-------------------------------------------------------------------------
+                    You have " $nc" cores. And
+			changing the makeflags for "$nc" cores. Aswell as
+				changing the compression settings.
+-------------------------------------------------------------------------
+"
 TOTALMEM=$(cat /proc/meminfo | grep -i 'memtotal' | grep -o '[[:digit:]]*')
 if [[  $TOTALMEM -gt 8000000 ]]; then
 sed -i "s/#MAKEFLAGS=\"-j2\"/MAKEFLAGS=\"-j$nc\"/g" /etc/makepkg.conf
-echo "Changing the compression settings for "$nc" cores."
 sed -i "s/COMPRESSXZ=(xz -c -z -)/COMPRESSXZ=(xz -c -T $nc -z -)/g" /etc/makepkg.conf
 fi
-echo "-------------------------------------------------"
-echo "       Setup Language to US and set locale       "
-echo "-------------------------------------------------"
+echo -ne "
+-------------------------------------------------------------------------
+                    Setup Language to US and set locale  
+-------------------------------------------------------------------------
+"
 sed -i 's/^#en_US.UTF-8 UTF-8/en_US.UTF-8 UTF-8/' /etc/locale.gen
 locale-gen
-timedatectl --no-ask-password set-timezone America/Chicago
+timedatectl --no-ask-password set-timezone ${timezone}
 timedatectl --no-ask-password set-ntp 1
 localectl --no-ask-password set-locale LANG="en_US.UTF-8" LC_TIME="en_US.UTF-8"
 
 # Set keymaps
-localectl --no-ask-password set-keymap us
+localectl --no-ask-password set-keymap ${keymap}
 
 # Add sudo no password rights
 sed -i 's/^# %wheel ALL=(ALL) NOPASSWD: ALL/%wheel ALL=(ALL) NOPASSWD: ALL/' /etc/sudoers
@@ -50,14 +64,18 @@ sed -i 's/^#Para/Para/' /etc/pacman.conf
 #Enable multilib
 sed -i "/\[multilib\]/,/Include/"'s/^#//' /etc/pacman.conf
 pacman -Sy --noconfirm
-
-echo -e "\nInstalling Base System\n"
-
+echo -ne "
+-------------------------------------------------------------------------
+                    Installing Base System  
+-------------------------------------------------------------------------
+"
 sudo pacman -S --noconfirm --needed - < /pkg-files/pacman-pkgs.txt
-
-#
+echo -ne "
+-------------------------------------------------------------------------
+                    Installing Microcode
+-------------------------------------------------------------------------
+"
 # determine processor type and install microcode
-# 
 proc_type=$(lscpu | awk '/Vendor ID:/ {print $3}')
 case "$proc_type" in
 	GenuineIntel)
@@ -70,8 +88,12 @@ case "$proc_type" in
 		pacman -S --noconfirm amd-ucode
 		proc_ucode=amd-ucode.img
 		;;
-esac	
-
+esac
+echo -ne "
+-------------------------------------------------------------------------
+                    Installing Graphics Drivers
+-------------------------------------------------------------------------
+"
 # Graphics Drivers find and install
 if lspci | grep -E "NVIDIA|GeForce"; then
     pacman -S nvidia --noconfirm --needed
@@ -81,21 +103,31 @@ elif lspci | grep -E "Radeon"; then
 elif lspci | grep -E "Integrated Graphics Controller"; then
     pacman -S libva-intel-driver libvdpau-va-gl lib32-vulkan-intel vulkan-intel libva-intel-driver libva-utils --needed --noconfirm
 fi
-
-echo -e "\nDone!\n"
-if ! source install.conf; then
-	read -p "Please enter username:" username
-echo "username=$username" >> ${HOME}/$SCRIPTHOME/install.conf
-fi
-if [ $(whoami) = "root"  ];
-then
+echo -ne "
+-------------------------------------------------------------------------
+                    Adding User
+-------------------------------------------------------------------------
+"
+if [ $(whoami) = "root"  ]; then
     useradd -m -G wheel,libvirt -s /bin/bash $username 
-	passwd $username
+# use chpasswd to enter $username:$password
+    echo "$username:$password" | chpasswd
 	cp -R /root/$SCRIPTHOME /home/$username/
     chown -R $username: /home/$username/$SCRIPTHOME
-	read -p "Please name your machine:" nameofmachine
-	echo $nameofmachine > /etc/hostname
+# enter $hostname to /etc/hostname
+	echo $hostname > /etc/hostname
 else
 	echo "You are already a user proceed with aur installs"
 fi
-
+if [[ ${FS} == "luks" ]]; then
+# Making sure to edit mkinitcpio conf if luks is selected
+# add encrypt in mkinitcpio.conf before filesystems in hooks
+    sed -i 's/filesystems/encrypt filesystems/g' /etc/mkinitcpio.conf
+# making mkinitcpio with linux kernel
+    mkinitcpio -p linux
+fi
+echo -ne "
+-------------------------------------------------------------------------
+                    SYSTEM READY FOR 2-user.sh
+-------------------------------------------------------------------------
+"
\ No newline at end of file
diff --git a/2-user.sh b/2-user.sh
index 7a32541..f583586 100755
--- a/2-user.sh
+++ b/2-user.sh
@@ -1,17 +1,20 @@
 #!/usr/bin/env bash
-#-------------------------------------------------------------------------
-#   █████╗ ██████╗  ██████╗██╗  ██╗████████╗██╗████████╗██╗   ██╗███████╗
-#  ██╔══██╗██╔══██╗██╔════╝██║  ██║╚══██╔══╝██║╚══██╔══╝██║   ██║██╔════╝
-#  ███████║██████╔╝██║     ███████║   ██║   ██║   ██║   ██║   ██║███████╗
-#  ██╔══██║██╔══██╗██║     ██╔══██║   ██║   ██║   ██║   ██║   ██║╚════██║
-#  ██║  ██║██║  ██║╚██████╗██║  ██║   ██║   ██║   ██║   ╚██████╔╝███████║
-#  ╚═╝  ╚═╝╚═╝  ╚═╝ ╚═════╝╚═╝  ╚═╝   ╚═╝   ╚═╝   ╚═╝    ╚═════╝ ╚══════╝
-#-------------------------------------------------------------------------
+echo -ne "
+-------------------------------------------------------------------------
+   █████╗ ██████╗  ██████╗██╗  ██╗████████╗██╗████████╗██╗   ██╗███████╗
+  ██╔══██╗██╔══██╗██╔════╝██║  ██║╚══██╔══╝██║╚══██╔══╝██║   ██║██╔════╝
+  ███████║██████╔╝██║     ███████║   ██║   ██║   ██║   ██║   ██║███████╗
+  ██╔══██║██╔══██╗██║     ██╔══██║   ██║   ██║   ██║   ██║   ██║╚════██║
+  ██║  ██║██║  ██║╚██████╗██║  ██║   ██║   ██║   ██║   ╚██████╔╝███████║
+  ╚═╝  ╚═╝╚═╝  ╚═╝ ╚═════╝╚═╝  ╚═╝   ╚═╝   ╚═╝   ╚═╝    ╚═════╝ ╚══════╝
+-------------------------------------------------------------------------
+                    Automated Arch Linux Installer
+-------------------------------------------------------------------------
 
-echo -e "\nINSTALLING AUR SOFTWARE\n"
+Installing AUR Softwares
+"
 # You can solve users running this script as root with this and then doing the same for the next for statement. However I will leave this up to you.
 
-echo "CLONING: YAY"
 cd ~
 git clone "https://aur.archlinux.org/yay.git"
 cd ${HOME}/yay
@@ -31,5 +34,9 @@ konsave -i $HOME/$SCRIPTHOME/kde.knsv
 sleep 1
 konsave -a kde
 
-echo -e "\nDone!\n"
+echo -ne "
+-------------------------------------------------------------------------
+                    SYSTEM READY FOR 3-post-setup.sh
+-------------------------------------------------------------------------
+"
 exit
diff --git a/3-post-setup.sh b/3-post-setup.sh
index c230620..f90f9c9 100755
--- a/3-post-setup.sh
+++ b/3-post-setup.sh
@@ -1,36 +1,45 @@
 #!/usr/bin/env bash
-#-------------------------------------------------------------------------
-#   █████╗ ██████╗  ██████╗██╗  ██╗████████╗██╗████████╗██╗   ██╗███████╗
-#  ██╔══██╗██╔══██╗██╔════╝██║  ██║╚══██╔══╝██║╚══██╔══╝██║   ██║██╔════╝
-#  ███████║██████╔╝██║     ███████║   ██║   ██║   ██║   ██║   ██║███████╗
-#  ██╔══██║██╔══██╗██║     ██╔══██║   ██║   ██║   ██║   ██║   ██║╚════██║
-#  ██║  ██║██║  ██║╚██████╗██║  ██║   ██║   ██║   ██║   ╚██████╔╝███████║
-#  ╚═╝  ╚═╝╚═╝  ╚═╝ ╚═════╝╚═╝  ╚═╝   ╚═╝   ╚═╝   ╚═╝    ╚═════╝ ╚══════╝
-#-------------------------------------------------------------------------
+echo -ne "
+-------------------------------------------------------------------------
+   █████╗ ██████╗  ██████╗██╗  ██╗████████╗██╗████████╗██╗   ██╗███████╗
+  ██╔══██╗██╔══██╗██╔════╝██║  ██║╚══██╔══╝██║╚══██╔══╝██║   ██║██╔════╝
+  ███████║██████╔╝██║     ███████║   ██║   ██║   ██║   ██║   ██║███████╗
+  ██╔══██║██╔══██╗██║     ██╔══██║   ██║   ██║   ██║   ██║   ██║╚════██║
+  ██║  ██║██║  ██║╚██████╗██║  ██║   ██║   ██║   ██║   ╚██████╔╝███████║
+  ╚═╝  ╚═╝╚═╝  ╚═╝ ╚═════╝╚═╝  ╚═╝   ╚═╝   ╚═╝   ╚═╝    ╚═════╝ ╚══════╝
+-------------------------------------------------------------------------
+                    Automated Arch Linux Installer
+-------------------------------------------------------------------------
 
-echo -e "\nFINAL SETUP AND CONFIGURATION"
-echo "--------------------------------------"
-echo "-- GRUB EFI Bootloader Install&Check--"
-echo "--------------------------------------"
+Final Setup and Configurations
+GRUB EFI Bootloader Install & Check
+"
 if [[ -d "/sys/firmware/efi" ]]; then
     grub-install --efi-directory=/boot ${DISK}
 fi
 grub-mkconfig -o /boot/grub/grub.cfg
 
-# ------------------------------------------------------------------------
-
-echo -e "\nEnabling Login Display Manager"
+echo -ne "
+-------------------------------------------------------------------------
+                    Enabling Login Display Manager
+-------------------------------------------------------------------------
+"
 systemctl enable sddm.service
-echo -e "\nSetup SDDM Theme"
+echo -ne "
+-------------------------------------------------------------------------
+                    Setting up SDDM Theme
+-------------------------------------------------------------------------
+"
 cat <<EOF > /etc/sddm.conf
 [Theme]
 Current=Nordic
 EOF
 
-# ------------------------------------------------------------------------
-
-echo -e "\nEnabling essential services"
-
+echo -ne "
+-------------------------------------------------------------------------
+                    Enabling Essential Services
+-------------------------------------------------------------------------
+"
 systemctl enable cups.service
 ntpd -qg
 systemctl enable ntpd.service
@@ -38,10 +47,10 @@ systemctl disable dhcpcd.service
 systemctl stop dhcpcd.service
 systemctl enable NetworkManager.service
 systemctl enable bluetooth
-echo "
-###############################################################################
-# Cleaning
-###############################################################################
+echo -ne "
+-------------------------------------------------------------------------
+                    Cleaning 
+-------------------------------------------------------------------------
 "
 # Remove no password sudo rights
 sed -i 's/^%wheel ALL=(ALL) NOPASSWD: ALL/# %wheel ALL=(ALL) NOPASSWD: ALL/' /etc/sudoers
diff --git a/archtitus.sh b/archtitus.sh
index c981a50..c6e09e4 100755
--- a/archtitus.sh
+++ b/archtitus.sh
@@ -2,16 +2,37 @@
 
 # Find the name of the folder the scripts are in
 export SCRIPTHOME="$(basename -- $PWD)"
-echo "Scripts are in dir named $SCRIPTHOME"
-
+echo -ne "
+-------------------------------------------------------------------------
+   █████╗ ██████╗  ██████╗██╗  ██╗████████╗██╗████████╗██╗   ██╗███████╗
+  ██╔══██╗██╔══██╗██╔════╝██║  ██║╚══██╔══╝██║╚══██╔══╝██║   ██║██╔════╝
+  ███████║██████╔╝██║     ███████║   ██║   ██║   ██║   ██║   ██║███████╗
+  ██╔══██║██╔══██╗██║     ██╔══██║   ██║   ██║   ██║   ██║   ██║╚════██║
+  ██║  ██║██║  ██║╚██████╗██║  ██║   ██║   ██║   ██║   ╚██████╔╝███████║
+  ╚═╝  ╚═╝╚═╝  ╚═╝ ╚═════╝╚═╝  ╚═╝   ╚═╝   ╚═╝   ╚═╝    ╚═════╝ ╚══════╝
+-------------------------------------------------------------------------
+                    Automated Arch Linux Installer
+-------------------------------------------------------------------------
+                Scripts are in directory named $SCRIPTHOME
+"
+    bash startup.sh
+    source setup.conf
     bash 0-preinstall.sh
     arch-chroot /mnt /root/$SCRIPTHOME/1-setup.sh
     source /mnt/root/$SCRIPTHOME/install.conf
     arch-chroot /mnt /usr/bin/runuser -u $username -- /home/$username/$SCRIPTHOME/2-user.sh
     arch-chroot /mnt /root/$SCRIPTHOME/3-post-setup.sh
 
-echo "
-###############################################################################
-# Done - Please Eject Install Media and Reboot
-###############################################################################
+echo -ne "
+-------------------------------------------------------------------------
+   █████╗ ██████╗  ██████╗██╗  ██╗████████╗██╗████████╗██╗   ██╗███████╗
+  ██╔══██╗██╔══██╗██╔════╝██║  ██║╚══██╔══╝██║╚══██╔══╝██║   ██║██╔════╝
+  ███████║██████╔╝██║     ███████║   ██║   ██║   ██║   ██║   ██║███████╗
+  ██╔══██║██╔══██╗██║     ██╔══██║   ██║   ██║   ██║   ██║   ██║╚════██║
+  ██║  ██║██║  ██║╚██████╗██║  ██║   ██║   ██║   ██║   ╚██████╔╝███████║
+  ╚═╝  ╚═╝╚═╝  ╚═╝ ╚═════╝╚═╝  ╚═╝   ╚═╝   ╚═╝   ╚═╝    ╚═════╝ ╚══════╝
+-------------------------------------------------------------------------
+                    Automated Arch Linux Installer
+-------------------------------------------------------------------------
+                Done - Please Eject Install Media and Reboot
 "
\ No newline at end of file
diff --git a/startup.sh b/startup.sh
new file mode 100644
index 0000000..bc5f0c9
--- /dev/null
+++ b/startup.sh
@@ -0,0 +1,133 @@
+#!/usr/bin/env bash
+# This script will ask users about their prefrences like disk, file system,
+logo () {
+# This will be shown on every set as user is progressing
+echo -ne "
+-------------------------------------------------------------------------
+ █████╗ ██████╗  ██████╗██╗  ██╗████████╗██╗████████╗██╗   ██╗███████╗
+██╔══██╗██╔══██╗██╔════╝██║  ██║╚══██╔══╝██║╚══██╔══╝██║   ██║██╔════╝
+███████║██████╔╝██║     ███████║   ██║   ██║   ██║   ██║   ██║███████╗
+██╔══██║██╔══██╗██║     ██╔══██║   ██║   ██║   ██║   ██║   ██║╚════██║
+██║  ██║██║  ██║╚██████╗██║  ██║   ██║   ██║   ██║   ╚██████╔╝███████║
+╚═╝  ╚═╝╚═╝  ╚═╝ ╚═════╝╚═╝  ╚═╝   ╚═╝   ╚═╝   ╚═╝    ╚═════╝ ╚══════╝
+------------------------------------------------------------------------
+            Please select presetup settings for your system              
+------------------------------------------------------------------------
+"
+}
+filesystem () {
+# This function will handle file systems. At this movement we are handling only
+# btrfs and ext4. Others will be added in future.
+echo -ne "
+    Please Select your file system for both boot and root
+    1)      btrfs
+    2)      ext4
+    3)      luks with btrfs
+    0)      exit
+"
+read FS
+case $FS in
+1) echo "FS=btrfs" >> setup.conf;;
+2) echo "FS=ext4" >> setup.conf;;
+3) 
+echo -ne "Please enter your luks password: "
+read luks_password
+echo "luks_password=$luks_password" >> setup.conf
+echo "FS=luks" >> setup.conf;;
+0) exit ;;
+*) echo "Wrong option please select again"; filesystem;;
+esac
+}
+timezone () {
+# Added this from arch wiki https://wiki.archlinux.org/title/System_time
+time_zone="$(curl --fail https://ipapi.co/timezone)"
+echo -ne "System detected your timezone to be '$time_zone'"
+echo -ne "Is this correct? yes/no:" 
+read answer
+case $answer in
+    y|Y|yes|Yes|YES)
+    echo "timezone=$time_zone" >> setup.conf;;
+    n|N|no|NO|No)
+    echo "Please enter your desired timezone e.g. Europe/London :" 
+    read new_timezone
+    echo "timezone=$new_timezone" >> setup.conf;;
+    *) echo "Wrong option. Try again";timezone;;
+esac
+}
+keymap () {
+# These are default key maps as presented in official arch repo archinstall
+echo -ne "
+Please select key board layout from this list
+    -by
+    -ca
+    -cf
+    -cz
+    -de
+    -dk
+    -es
+    -et
+    -fa
+    -fi
+    -fr
+    -gr
+    -hu
+    -il
+    -it
+    -lt
+    -lv
+    -mk
+    -nl
+    -no
+    -pl
+    -ro
+    -ru
+    -sg
+    -ua
+    -uk
+    -us
+
+"
+read -p "Your key boards layout:" keymap
+echo "keymap=$keymap" >> setup.conf
+}
+diskpart () {
+lsblk
+echo -ne "
+------------------------------------------------------------------------
+    THIS WILL FORMAT AND DELETE ALL DATA ON THE DISK             
+    Please make sure you know what you are doing because         
+    after formating your disk there is no way to get data back      
+------------------------------------------------------------------------
+
+Please enter disk to work on: (example /dev/sda):
+"
+read option
+echo "DISK=$option" >> setup.conf
+}
+userinfo () {
+echo -ne "Please enter username: "
+read username
+echo "username=$username" >> setup.conf
+echo -ne "Please enter your password: "
+read password
+echo "password=$password" >> setup.conf
+echo -ne "Please enter your hostname: "
+read hostname
+echo "hostname=$hostname" >> setup.conf
+}
+# More features in future
+# language (){}
+rm -rf setup.conf &>/dev/null
+userinfo
+clear
+logo
+diskpart
+clear
+logo
+filesystem
+clear
+logo
+timezone
+clear
+logo
+keymap
\ No newline at end of file