Merge 392a971270 into 96096ea0ff

.env.example

@@ -13,4 +13,36 @@ ZEP_API_KEY=your_zep_api_key_here
 # 注意如果不使用加速配置，env文件中就不要出现下面的配置项
 LLM_BOOST_API_KEY=your_api_key_here
 LLM_BOOST_BASE_URL=your_base_url_here
-LLM_BOOST_MODEL_NAME=your_model_name_here
+LLM_BOOST_MODEL_NAME=your_model_name_here
+
+# ===== 安全配置（C1）=====
+# 生产模式下必须设置自定义 SECRET_KEY（否则启动校验失败）。生成示例：python -c "import secrets;print(secrets.token_hex(32))"
+SECRET_KEY=change_me_to_a_random_secret
+# 调试模式默认关闭；设为 true 会启用 Werkzeug 交互式调试器（可远程 RCE），切勿在联网/生产开启
+FLASK_DEBUG=false
+
+# ===== API 鉴权（C2）=====
+# 所有 /api/* 端点需携带 `X-API-Key: <API_KEY>`（或 `Authorization: Bearer <API_KEY>`）
+# AUTH_ENABLED=true（默认）时必须设置 API_KEY；本地开发可设 AUTH_ENABLED=false 关闭鉴权
+AUTH_ENABLED=true
+API_KEY=change_me_to_a_strong_api_key
+# 前端构建期变量：必须等于 API_KEY。docker compose 会把它作为 build-arg 注入前端构建，
+# 使打包后的 UI 自动带上 X-API-Key。注意：它会被打进客户端包、可被任何访问者提取（见 README 安全说明）。
+VITE_API_KEY=change_me_to_a_strong_api_key
+
+# ===== CORS 允许来源（H4）=====
+# 逗号分隔的前端来源；不再用通配 '*'。生产填前端域名，例如 https://app.example.com
+ALLOWED_ORIGINS=http://localhost:3000,http://127.0.0.1:3000
+
+# ===== 模拟成本上限（C3，denial-of-wallet 防护）=====
+# 客户端未传 max_rounds 时的默认轮数上限（完整长度模拟请按请求传 max_rounds 或调高此值）
+# 默认 150 覆盖典型配置（72h/30min=144 轮）以免悄悄截断标准演示
+OASIS_DEFAULT_MAX_ROUNDS=150
+# 硬上限：无论客户端传入何值都不得超过
+OASIS_MAX_ROUNDS_CAP=200
+OASIS_MAX_AGENTS_CAP=1000
+
+# ===== 模拟超时（C4，秒）=====
+# 单轮 env.step 超时 + 整轮模拟总超时，防止 LLM/网络挂起导致 run 永久 wedge
+OASIS_ROUND_TIMEOUT_SEC=600
+OASIS_RUN_TIMEOUT_SEC=7200

Dockerfile

@@ -23,7 +23,17 @@ RUN npm ci \
 # 复制项目源码
 COPY . .
 
+# C2：前端 API Key 是 Vite 构建期变量，必须在 `npm run build` 之前进入构建环境，否则打包后的
+# UI 带空 key、在 AUTH_ENABLED=true 下所有 /api/* 会 401。由 docker compose 经 build-arg 注入。
+ARG VITE_API_KEY=""
+ENV VITE_API_KEY=$VITE_API_KEY
+
+# C1：构建前端静态产物，生产用 `vite preview` 提供（不再运行 Vite 开发服务器）
+RUN npm run build
+
 EXPOSE 3000 5001
 
-# 同时启动前后端（开发模式）
+# C1：生产启动 —— 后端用 gunicorn（单 worker 多线程，保留进程内模拟态），
-CMD ["npm", "run", "dev"]
+# 前端用 vite preview 提供已构建产物。开发请改用 `npm run dev`。
+# 安全前提：须经 .env 设置 SECRET_KEY 与 API_KEY（FLASK_DEBUG 默认 false）。
+CMD ["npm", "run", "start"]

README.md

@@ -127,6 +127,48 @@ LLM_MODEL_NAME=qwen-plus
 ZEP_API_KEY=your_zep_api_key
 ```
 
+#### Security configuration (required for production)
+
+The backend ships secure-by-default. When `FLASK_DEBUG=false` (the default) the app
+runs under **gunicorn** (no Werkzeug debugger) and refuses to start unless these are set:
+
+```env
+# A random secret (required when FLASK_DEBUG=false):
+#   python -c "import secrets;print(secrets.token_hex(32))"
+SECRET_KEY=your_random_secret
+
+# API-key auth is ON by default — every /api/* request must carry the key.
+# Clients send  X-API-Key: <API_KEY>  (or  Authorization: Bearer <API_KEY> ).
+AUTH_ENABLED=true
+API_KEY=your_strong_api_key
+```
+
+- The bundled web UI reads the key from the **build-time** var **`VITE_API_KEY`** (set it equal to
+  `API_KEY`) and sends it automatically as `X-API-Key`. It must be present **before** the frontend
+  is built:
+  - **Docker:** put `VITE_API_KEY` in the root `.env`; `docker compose up --build` injects it as a
+    build-arg (docker-compose.yml `build.args` → Dockerfile `ARG VITE_API_KEY` → `npm run build`).
+    The pre-built `ghcr.io` image (used by a bare `docker compose up` without `--build`) bakes no
+    custom key — rebuild, or use `AUTH_ENABLED=false` for that path.
+  - **Local frontend build:** copy `frontend/.env.example` → `frontend/.env` and set `VITE_API_KEY`,
+    then `npm run build`. (The root `.env` is read by the backend only, not by Vite.)
+  - ⚠️ A key baked into the client bundle is extractable by anyone who loads the page — for
+    multi-tenant/public exposure replace this with session login or a gateway that injects per-user
+    tokens. For local/internal/VPN or behind-a-gateway single-host use it is sufficient.
+- Local development / simplest single-host demo: set `AUTH_ENABLED=false` to disable the key
+  requirement entirely (the API is then protected only by your network boundary).
+- Cost controls (denial-of-wallet): a run is bounded by `OASIS_DEFAULT_MAX_ROUNDS` (when the
+  client omits `max_rounds`), the hard ceilings `OASIS_MAX_ROUNDS_CAP` / `OASIS_MAX_AGENTS_CAP`,
+  and per-round / total timeouts `OASIS_ROUND_TIMEOUT_SEC` / `OASIS_RUN_TIMEOUT_SEC`. See
+  `.env.example` for defaults.
+- Run the production server with a **single worker** (`gunicorn -w 1 --threads N`); simulation
+  run-state is held in-process, so multiple workers break stop/status routing.
+- **CSP / API origin:** the frontend ships a Content-Security-Policy whose `connect-src` allows
+  `'self'` + `http://localhost:5001` (the default API). If you point the UI at a different API
+  host (set `VITE_API_BASE_URL`), you **must** add that origin to `connect-src` in
+  `frontend/index.html` too, or the browser will silently block all API calls. Restrict
+  `ALLOWED_ORIGINS` (backend) to your real frontend origin in production.
+
 #### 2. Install Dependencies
 
 ```bash

backend/app/__init__.py

@@ -2,6 +2,7 @@
 MiroFish Backend - Flask应用工厂
 """
 
+import hmac
 import os
 import warnings
 
@@ -9,7 +10,7 @@ import warnings
 # 需要在所有其他导入之前设置
 warnings.filterwarnings("ignore", message=".*resource_tracker.*")
 
-from flask import Flask, request
+from flask import Flask, jsonify, request
 from flask_cors import CORS
 
 from .config import Config
@@ -18,9 +19,16 @@ from .utils.logger import setup_logger, get_logger
 
 def create_app(config_class=Config):
     """Flask应用工厂函数"""
+    # 配置校验（C1/C2）：在工厂内执行，确保 gunicorn（生产）路径也强制校验。
+    # run.py（开发入口）也会单独校验，这里覆盖 `gunicorn app:create_app()` 这条不经过 run.py 的路径，
+    # 否则 SECRET_KEY/API_KEY/LLM_API_KEY/ZEP_API_KEY 的缺省检查在生产中形同虚设。
+    config_errors = config_class.validate()
+    if config_errors:
+        raise RuntimeError("配置错误，无法启动:\n  - " + "\n  - ".join(config_errors))
+
     app = Flask(__name__)
     app.config.from_object(config_class)
-    
+
     # 设置JSON编码：确保中文直接显示（而不是 \uXXXX 格式）
     # Flask >= 2.3 使用 app.json.ensure_ascii，旧版本使用 JSON_AS_ASCII 配置
     if hasattr(app, 'json') and hasattr(app.json, 'ensure_ascii'):
@@ -39,9 +47,40 @@ def create_app(config_class=Config):
         logger.info("MiroFish Backend 启动中...")
         logger.info("=" * 50)
     
-    # 启用CORS
+    # 启用CORS（H4）：限定来源为 Config.ALLOWED_ORIGINS（默认本地前端源），不再通配 '*'。
-    CORS(app, resources={r"/api/*": {"origins": "*"}})
+    CORS(app, resources={r"/api/*": {"origins": Config.ALLOWED_ORIGINS}})
-    
+
+    # API Key 鉴权（C2）：所有 /api/* 端点强制鉴权。
+    # 客户端通过 `X-API-Key: <key>` 或 `Authorization: Bearer <key>` 传入。
+    # /health 等非 /api 路径豁免；CORS 预检（OPTIONS）放行（浏览器预检不带自定义头）。
+    @app.before_request
+    def require_api_key():
+        if not Config.AUTH_ENABLED:
+            return None
+        path = request.path or ''
+        if not path.startswith('/api/'):
+            return None
+        if request.method == 'OPTIONS':
+            return None
+        provided = request.headers.get('X-API-Key', '')
+        if not provided:
+            auth_header = request.headers.get('Authorization', '')
+            if auth_header.startswith('Bearer '):
+                provided = auth_header[7:]
+        expected = Config.API_KEY or ''
+        if not expected:
+            return jsonify({"success": False, "error": "Unauthorized"}), 401
+        # 常量时间比较，避免时序侧信道。两侧编码为 bytes —— compare_digest 对含非 ASCII 字符的
+        # str 会抛 TypeError；编码后任何输入都安全，绝不让鉴权拒绝路径崩成 500。
+        try:
+            ok = hmac.compare_digest(provided.encode('utf-8'), expected.encode('utf-8'))
+        except Exception:
+            ok = False
+        if not ok:
+            return jsonify({"success": False, "error": "Unauthorized"}), 401
+        return None
+
+
     # 注册模拟进程清理函数（确保服务器关闭时终止所有模拟进程）
     from .services.simulation_runner import SimulationRunner
     SimulationRunner.register_cleanup()
@@ -61,7 +100,16 @@ def create_app(config_class=Config):
         logger = get_logger('mirofish.request')
         logger.debug(f"响应: {response.status_code}")
         return response
-    
+
+    # 安全响应头（纵深防御）：API 响应附带基础安全头。前端 HTML 的 CSP 由 index.html 的
+    # <meta> + vite preview 响应头提供（后端不直接服务 HTML）。
+    @app.after_request
+    def security_headers(response):
+        response.headers.setdefault('X-Content-Type-Options', 'nosniff')
+        response.headers.setdefault('X-Frame-Options', 'DENY')
+        response.headers.setdefault('Referrer-Policy', 'strict-origin-when-cross-origin')
+        return response
+
     # 注册蓝图
     from .api import graph_bp, simulation_bp, report_bp
     app.register_blueprint(graph_bp, url_prefix='/api/graph')

backend/app/api/graph.py

@@ -4,7 +4,7 @@
 """
 
 import os
-import traceback
+from ..utils.security import safe_traceback, safe_error, upload_content_ok
 import threading
 from flask import request, jsonify
 
@@ -182,7 +182,8 @@ def generate_ontology():
         all_text = ""
         
         for file in uploaded_files:
-            if file and file.filename and allowed_file(file.filename):
+            # 扩展名白名单 + 魔术字节嗅探（拒绝改名混入的二进制/伪装文件）
+            if file and file.filename and allowed_file(file.filename) and upload_content_ok(file, file.filename):
                 # 保存文件到项目目录
                 file_info = ProjectManager.save_file_to_project(
                     project.project_id, 
@@ -250,8 +251,8 @@ def generate_ontology():
     except Exception as e:
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -495,17 +496,17 @@ def build_graph():
             except Exception as e:
                 # 更新项目状态为失败
                 build_logger.error(f"[{task_id}] 图谱构建失败: {str(e)}")
-                build_logger.debug(traceback.format_exc())
+                build_logger.debug(safe_traceback())
                 
                 project.status = ProjectStatus.FAILED
-                project.error = str(e)
+                project.error = safe_error(e)
                 ProjectManager.save_project(project)
                 
                 task_manager.update_task(
                     task_id,
                     status=TaskStatus.FAILED,
-                    message=t('progress.buildFailed', error=str(e)),
+                    message=t('progress.buildFailed', error=safe_error(e)),
-                    error=traceback.format_exc()
+                    error=safe_traceback()
                 )
         
         # 启动后台线程
@@ -524,8 +525,8 @@ def build_graph():
     except Exception as e:
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -589,8 +590,8 @@ def get_graph_data(graph_id: str):
     except Exception as e:
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -617,6 +618,6 @@ def delete_graph(graph_id: str):
     except Exception as e:
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500

backend/app/api/report.py

@@ -4,7 +4,7 @@ Report API路由
 """
 
 import os
-import traceback
+from ..utils.security import safe_traceback, safe_error
 import threading
 from flask import request, jsonify, send_file
 
@@ -173,7 +173,7 @@ def generate_report():
                 
             except Exception as e:
                 logger.error(f"报告生成失败: {str(e)}")
-                task_manager.fail_task(task_id, str(e))
+                task_manager.fail_task(task_id, safe_error(e))
         
         # 启动后台线程
         thread = threading.Thread(target=run_generate, daemon=True)
@@ -195,8 +195,8 @@ def generate_report():
         logger.error(f"启动报告生成任务失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -268,7 +268,7 @@ def get_generate_status():
         logger.error(f"查询任务状态失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e)
+            "error": safe_error(e)
         }), 500
 
 
@@ -311,8 +311,8 @@ def get_report(report_id: str):
         logger.error(f"获取报告失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -350,8 +350,8 @@ def get_report_by_simulation(simulation_id: str):
         logger.error(f"获取报告失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -390,8 +390,8 @@ def list_reports():
         logger.error(f"列出报告失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -436,8 +436,8 @@ def download_report(report_id: str):
         logger.error(f"下载报告失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -462,8 +462,8 @@ def delete_report(report_id: str):
         logger.error(f"删除报告失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -559,8 +559,8 @@ def chat_with_report_agent():
         logger.error(f"对话失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -602,8 +602,8 @@ def get_report_progress(report_id: str):
         logger.error(f"获取报告进度失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -653,8 +653,8 @@ def get_report_sections(report_id: str):
         logger.error(f"获取章节列表失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -697,8 +697,8 @@ def get_single_section(report_id: str, section_index: int):
         logger.error(f"获取章节内容失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -748,8 +748,8 @@ def check_report_status(simulation_id: str):
         logger.error(f"检查报告状态失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -809,8 +809,8 @@ def get_agent_log(report_id: str):
         logger.error(f"获取Agent日志失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -843,8 +843,8 @@ def stream_agent_log(report_id: str):
         logger.error(f"获取Agent日志失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -891,8 +891,8 @@ def get_console_log(report_id: str):
         logger.error(f"获取控制台日志失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -925,8 +925,8 @@ def stream_console_log(report_id: str):
         logger.error(f"获取控制台日志失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -975,8 +975,8 @@ def search_graph_tool():
         logger.error(f"图谱搜索失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -1015,6 +1015,6 @@ def get_graph_statistics_tool():
         logger.error(f"获取图谱统计失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500

backend/app/api/simulation.py

@@ -4,7 +4,7 @@ Step2: Zep实体读取与过滤、OASIS模拟准备与运行（全程自动化
 """
 
 import os
-import traceback
+from ..utils.security import safe_traceback, safe_error
 from flask import request, jsonify, send_file
 
 from . import simulation_bp
@@ -85,8 +85,8 @@ def get_graph_entities(graph_id: str):
         logger.error(f"获取图谱实体失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -118,8 +118,8 @@ def get_entity_detail(graph_id: str, entity_uuid: str):
         logger.error(f"获取实体详情失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -155,8 +155,8 @@ def get_entities_by_type(graph_id: str, entity_type: str):
         logger.error(f"获取实体失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -232,8 +232,8 @@ def create_simulation():
         logger.error(f"创建模拟失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -597,14 +597,14 @@ def prepare_simulation():
                 )
                 
             except Exception as e:
-                logger.error(f"准备模拟失败: {str(e)}")
+                logger.error(f"准备模拟失败: {e}", exc_info=True)
-                task_manager.fail_task(task_id, str(e))
+                task_manager.fail_task(task_id, safe_error(e))
                 
                 # 更新模拟状态为失败
                 state = manager.get_simulation(simulation_id)
                 if state:
                     state.status = SimulationStatus.FAILED
-                    state.error = str(e)
+                    state.error = safe_error(e)
                     manager._save_simulation_state(state)
         
         # 启动后台线程
@@ -634,8 +634,8 @@ def prepare_simulation():
         logger.error(f"启动准备任务失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -748,7 +748,7 @@ def get_prepare_status():
         logger.error(f"查询任务状态失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e)
+            "error": safe_error(e)
         }), 500
 
 
@@ -780,8 +780,8 @@ def get_simulation(simulation_id: str):
         logger.error(f"获取模拟状态失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -809,8 +809,8 @@ def list_simulations():
         logger.error(f"列出模拟失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -982,8 +982,8 @@ def get_simulation_history():
         logger.error(f"获取历史模拟失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -1020,8 +1020,8 @@ def get_simulation_profiles(simulation_id: str):
         logger.error(f"获取Profile失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -1130,8 +1130,8 @@ def get_simulation_profiles_realtime(simulation_id: str):
         logger.error(f"实时获取Profile失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -1250,8 +1250,8 @@ def get_simulation_config_realtime(simulation_id: str):
         logger.error(f"实时获取Config失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -1286,8 +1286,8 @@ def get_simulation_config(simulation_id: str):
         logger.error(f"获取配置失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -1315,8 +1315,8 @@ def download_simulation_config(simulation_id: str):
         logger.error(f"下载配置失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -1367,8 +1367,8 @@ def download_simulation_script(script_name: str):
         logger.error(f"下载脚本失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -1441,8 +1441,8 @@ def generate_profiles():
         logger.error(f"生成Profile失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -1636,8 +1636,8 @@ def start_simulation():
         logger.error(f"启动模拟失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -1695,8 +1695,8 @@ def stop_simulation():
         logger.error(f"停止模拟失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -1755,8 +1755,8 @@ def get_run_status(simulation_id: str):
         logger.error(f"获取运行状态失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -1856,8 +1856,8 @@ def get_run_status_detail(simulation_id: str):
         logger.error(f"获取详细状态失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -1910,8 +1910,8 @@ def get_simulation_actions(simulation_id: str):
         logger.error(f"获取动作历史失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -1950,8 +1950,8 @@ def get_simulation_timeline(simulation_id: str):
         logger.error(f"获取时间线失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -1977,8 +1977,8 @@ def get_agent_stats(simulation_id: str):
         logger.error(f"获取Agent统计失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -2057,8 +2057,8 @@ def get_simulation_posts(simulation_id: str):
         logger.error(f"获取帖子失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -2132,8 +2132,8 @@ def get_simulation_comments(simulation_id: str):
         logger.error(f"获取评论失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -2263,8 +2263,8 @@ def interview_agent():
         logger.error(f"Interview失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -2401,8 +2401,8 @@ def interview_agents_batch():
         logger.error(f"批量Interview失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -2504,8 +2504,8 @@ def interview_all_agents():
         logger.error(f"全局Interview失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -2576,8 +2576,8 @@ def get_interview_history():
         logger.error(f"获取Interview历史失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -2641,8 +2641,8 @@ def get_env_status():
         logger.error(f"获取环境状态失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500
 
 
@@ -2711,6 +2711,6 @@ def close_simulation_env():
         logger.error(f"关闭环境失败: {str(e)}")
         return jsonify({
             "success": False,
-            "error": str(e),
+            "error": safe_error(e),
-            "traceback": traceback.format_exc()
+            "traceback": safe_traceback()
         }), 500

backend/app/config.py

@@ -21,9 +21,27 @@ class Config:
     """Flask配置类"""
     
     # Flask配置
+    # 注意：SECRET_KEY 的默认值是公开值，仅供 DEBUG 模式使用；生产模式（DEBUG=false）
+    # 必须通过环境变量设置自定义值（见 validate()）。
     SECRET_KEY = os.environ.get('SECRET_KEY', 'mirofish-secret-key')
-    DEBUG = os.environ.get('FLASK_DEBUG', 'True').lower() == 'true'
+    # 安全默认（C1）：DEBUG 默认关闭，避免误把 Werkzeug 交互式调试器（可远程 RCE）暴露到网络。
-    
+    DEBUG = os.environ.get('FLASK_DEBUG', 'False').lower() == 'true'
+
+    # 认证配置（C2）：所有 /api/* 端点强制 API Key 鉴权
+    # AUTH_ENABLED 默认开启；本地开发可显式设 AUTH_ENABLED=false 关闭。
+    # fail-closed 解析：仅显式 false/0/no/off 才关闭鉴权；其余任何值（含空白、拼写错误、
+    # 带尾换行的 'true\n'、'1'、'yes' 等）一律视为开启，避免 env 配置失误悄悄回到零鉴权。
+    API_KEY = os.environ.get('API_KEY')
+    AUTH_ENABLED = os.environ.get('AUTH_ENABLED', 'true').strip().lower() not in ('false', '0', 'no', 'off')
+
+    # CORS 允许来源（H4）：不再用通配 '*'。默认仅本地前端开发/预览源；生产用逗号分隔的
+    # ALLOWED_ORIGINS 指定前端域名（例如 https://app.example.com）。'*' 仍可显式设置但不推荐。
+    ALLOWED_ORIGINS = [
+        o.strip() for o in os.environ.get(
+            'ALLOWED_ORIGINS', 'http://localhost:3000,http://127.0.0.1:3000'
+        ).split(',') if o.strip()
+    ]
+
     # JSON配置 - 禁用ASCII转义，让中文直接显示（而不是 \uXXXX 格式）
     JSON_AS_ASCII = False
     
@@ -45,7 +63,18 @@ class Config:
     DEFAULT_CHUNK_OVERLAP = 50  # 默认重叠大小
     
     # OASIS模拟配置
-    OASIS_DEFAULT_MAX_ROUNDS = int(os.environ.get('OASIS_DEFAULT_MAX_ROUNDS', '10'))
+    # OASIS_DEFAULT_MAX_ROUNDS（C3）：客户端未显式传 max_rounds 时应用的默认轮数上限。
+    # 之前此常量从未被引用（dead config），现已在 SimulationRunner 中生效。默认 150 覆盖
+    # 典型配置（72h/30min = 144 轮）以免悄悄截断标准演示；更长的配置会被截到此值，且无论如何
+    # 都不会超过硬上限 OASIS_MAX_ROUNDS_CAP。匿名 denial-of-wallet 已由 C2 鉴权堵住，此处
+    # 仅约束“已鉴权客户端”单次运行的成本上界。
+    OASIS_DEFAULT_MAX_ROUNDS = int(os.environ.get('OASIS_DEFAULT_MAX_ROUNDS', '150'))
+    # 硬上限（C3，denial-of-wallet 防护）：无论客户端传入何值，轮数/agent 数都不得超过这些上限。
+    OASIS_MAX_ROUNDS_CAP = int(os.environ.get('OASIS_MAX_ROUNDS_CAP', '200'))
+    OASIS_MAX_AGENTS_CAP = int(os.environ.get('OASIS_MAX_AGENTS_CAP', '1000'))
+    # 模拟超时（C4，秒）：每轮 env.step 超时 + 整轮模拟总超时。子进程读取同名环境变量。
+    OASIS_ROUND_TIMEOUT_SEC = int(os.environ.get('OASIS_ROUND_TIMEOUT_SEC', '600'))
+    OASIS_RUN_TIMEOUT_SEC = int(os.environ.get('OASIS_RUN_TIMEOUT_SEC', '7200'))
     OASIS_SIMULATION_DATA_DIR = os.path.join(os.path.dirname(__file__), '../uploads/simulations')
     
     # OASIS平台可用动作配置
@@ -71,5 +100,11 @@ class Config:
             errors.append("LLM_API_KEY 未配置")
         if not cls.ZEP_API_KEY:
             errors.append("ZEP_API_KEY 未配置")
+        # C1：生产模式必须设置自定义 SECRET_KEY（默认值是公开值，可伪造签名 / 削弱调试器 PIN）
+        if not cls.DEBUG and cls.SECRET_KEY == 'mirofish-secret-key':
+            errors.append("生产模式（FLASK_DEBUG=false）必须设置自定义 SECRET_KEY")
+        # C2：开启鉴权时必须配置 API_KEY，否则所有 /api/* 都会 401
+        if cls.AUTH_ENABLED and not cls.API_KEY:
+            errors.append("AUTH_ENABLED=true 时必须设置 API_KEY（或显式 AUTH_ENABLED=false 关闭鉴权）")
         return errors
 

backend/app/models/project.py

@@ -12,6 +12,7 @@ from typing import Dict, Any, List, Optional
 from enum import Enum
 from dataclasses import dataclass, field, asdict
 from ..config import Config
+from ..utils.security import validate_id
 
 
 class ProjectStatus(str, Enum):
@@ -112,6 +113,7 @@ class ProjectManager:
     @classmethod
     def _get_project_dir(cls, project_id: str) -> str:
         """获取项目目录路径"""
+        validate_id(project_id, 'project_id')  # 路径校验，阻断穿越后再 join/rmtree
         return os.path.join(cls.PROJECTS_DIR, project_id)
     
     @classmethod

backend/app/services/graph_builder.py

@@ -18,6 +18,10 @@ from ..models.task import TaskManager, TaskStatus
 from ..utils.zep_paging import fetch_all_nodes, fetch_all_edges
 from .text_processor import TextProcessor
 from ..utils.locale import t, get_locale, set_locale
+from ..utils.logger import get_logger
+from ..utils.security import safe_error
+
+logger = get_logger('mirofish.graph_builder')
 
 
 @dataclass
@@ -186,9 +190,8 @@ class GraphBuilderService:
             })
             
         except Exception as e:
-            import traceback
+            logger.error(f"graph build failed (task {task_id})", exc_info=True)
-            error_msg = f"{str(e)}\n{traceback.format_exc()}"
+            self.task_manager.fail_task(task_id, safe_error(e))
-            self.task_manager.fail_task(task_id, error_msg)
     
     def create_graph(self, name: str) -> str:
         """创建Zep图谱（公开方法）"""
@@ -339,7 +342,7 @@ class GraphBuilderService:
                 
             except Exception as e:
                 if progress_callback:
-                    progress_callback(t('progress.batchFailed', batch=batch_num, error=str(e)), 0)
+                    progress_callback(t('progress.batchFailed', batch=batch_num, error=safe_error(e)), 0)
                 raise
         
         return episode_uuids

backend/app/services/report_agent.py

@@ -21,6 +21,7 @@ from enum import Enum
 from ..config import Config
 from ..utils.llm_client import LLMClient
 from ..utils.logger import get_logger
+from ..utils.security import validate_id
 from ..utils.locale import get_language_instruction, t
 from .zep_tools import (
     ZepToolsService, 
@@ -48,6 +49,7 @@ class ReportLogger:
         Args:
             report_id: 报告ID，用于确定日志文件路径
         """
+        validate_id(report_id, 'report_id')  # path check: report_id flows straight into the file path
         self.report_id = report_id
         self.log_file_path = os.path.join(
             Config.UPLOAD_FOLDER, 'reports', report_id, 'agent_log.jsonl'
@@ -319,6 +321,7 @@ class ReportConsoleLogger:
         Args:
             report_id: 报告ID，用于确定日志文件路径
         """
+        validate_id(report_id, 'report_id')  # path check: report_id flows straight into the file path
         self.report_id = report_id
         self.log_file_path = os.path.join(
             Config.UPLOAD_FOLDER, 'reports', report_id, 'console_log.txt'
@@ -1910,6 +1913,7 @@ class ReportManager:
     @classmethod
     def _get_report_folder(cls, report_id: str) -> str:
         """获取报告文件夹路径"""
+        validate_id(report_id, 'report_id')  # path check before join/rmtree
         return os.path.join(cls.REPORTS_DIR, report_id)
     
     @classmethod

backend/app/services/simulation_manager.py

@@ -14,6 +14,7 @@ from enum import Enum
 
 from ..config import Config
 from ..utils.logger import get_logger
+from ..utils.security import validate_id
 from .zep_entity_reader import ZepEntityReader, FilteredEntities
 from .oasis_profile_generator import OasisProfileGenerator, OasisAgentProfile
 from .simulation_config_generator import SimulationConfigGenerator, SimulationParameters
@@ -138,6 +139,7 @@ class SimulationManager:
     
     def _get_simulation_dir(self, simulation_id: str) -> str:
         """获取模拟数据目录"""
+        validate_id(simulation_id, 'simulation_id')  # 路径校验，阻断穿越后再 join/makedirs
         sim_dir = os.path.join(self.SIMULATION_DATA_DIR, simulation_id)
         os.makedirs(sim_dir, exist_ok=True)
         return sim_dir

backend/app/services/simulation_runner.py

@@ -21,6 +21,7 @@ from queue import Queue
 from ..config import Config
 from ..utils.logger import get_logger
 from ..utils.locale import get_locale, set_locale
+from ..utils.security import validate_id
 from .zep_graph_memory_updater import ZepGraphMemoryManager
 from .simulation_ipc import SimulationIPCClient, CommandType, IPCResponse
 
@@ -239,10 +240,16 @@ class SimulationRunner:
             cls._run_states[simulation_id] = state
         return state
     
+    @classmethod
+    def _run_dir(cls, simulation_id: str) -> str:
+        """Validated RUN_STATE_DIR/<simulation_id> -- blocks path traversal before any fs op."""
+        validate_id(simulation_id, 'simulation_id')
+        return os.path.join(cls.RUN_STATE_DIR, simulation_id)
+
     @classmethod
     def _load_run_state(cls, simulation_id: str) -> Optional[SimulationRunState]:
         """从文件加载运行状态"""
-        state_file = os.path.join(cls.RUN_STATE_DIR, simulation_id, "run_state.json")
+        state_file = os.path.join(cls._run_dir(simulation_id), "run_state.json")
         if not os.path.exists(state_file):
             return None
         
@@ -298,7 +305,7 @@ class SimulationRunner:
     @classmethod
     def _save_run_state(cls, state: SimulationRunState):
         """保存运行状态到文件"""
-        sim_dir = os.path.join(cls.RUN_STATE_DIR, state.simulation_id)
+        sim_dir = cls._run_dir(state.simulation_id)
         os.makedirs(sim_dir, exist_ok=True)
         state_file = os.path.join(sim_dir, "run_state.json")
         
@@ -331,13 +338,16 @@ class SimulationRunner:
         Returns:
             SimulationRunState
         """
+        # 路径校验：simulation_id 会进入 RUN_STATE_DIR 下的 join/makedirs 与子进程参数
+        validate_id(simulation_id, 'simulation_id')
+
         # 检查是否已在运行
         existing = cls.get_run_state(simulation_id)
         if existing and existing.runner_status in [RunnerStatus.RUNNING, RunnerStatus.STARTING]:
             raise ValueError(f"模拟已在运行中: {simulation_id}")
         
         # 加载模拟配置
-        sim_dir = os.path.join(cls.RUN_STATE_DIR, simulation_id)
+        sim_dir = cls._run_dir(simulation_id)
         config_path = os.path.join(sim_dir, "simulation_config.json")
         
         if not os.path.exists(config_path):
@@ -351,14 +361,27 @@ class SimulationRunner:
         total_hours = time_config.get("total_simulation_hours", 72)
         minutes_per_round = time_config.get("minutes_per_round", 30)
         total_rounds = int(total_hours * 60 / minutes_per_round)
-        
+
-        # 如果指定了最大轮数，则截断
+        # C3（denial-of-wallet 防护）：限制总轮数。
-        if max_rounds is not None and max_rounds > 0:
+        # - max_rounds 未指定时，应用服务端默认上限 OASIS_DEFAULT_MAX_ROUNDS（之前为 dead config）
-            original_rounds = total_rounds
+        # - 无论是否指定，都不得超过硬上限 OASIS_MAX_ROUNDS_CAP
-            total_rounds = min(total_rounds, max_rounds)
+        effective_max = max_rounds if (max_rounds is not None and max_rounds > 0) else Config.OASIS_DEFAULT_MAX_ROUNDS
-            if total_rounds < original_rounds:
+        effective_max = min(effective_max, Config.OASIS_MAX_ROUNDS_CAP)
-                logger.info(f"轮数已截断: {original_rounds} -> {total_rounds} (max_rounds={max_rounds})")
+        if total_rounds > effective_max:
-        
+            logger.info(
+                f"轮数已限制: {total_rounds} -> {effective_max} "
+                f"(max_rounds={max_rounds}, default={Config.OASIS_DEFAULT_MAX_ROUNDS}, cap={Config.OASIS_MAX_ROUNDS_CAP})"
+            )
+            total_rounds = effective_max
+
+        # C3（denial-of-wallet 防护）：限制 agent 数量。超过硬上限直接拒绝（避免巨额并发 LLM 调用）。
+        agent_count = len(config.get("agent_configs", []))
+        if agent_count > Config.OASIS_MAX_AGENTS_CAP:
+            raise ValueError(
+                f"Agent 数量 {agent_count} 超过上限 {Config.OASIS_MAX_AGENTS_CAP}，"
+                f"请减少种子实体或调高 OASIS_MAX_AGENTS_CAP 环境变量"
+            )
+
         state = SimulationRunState(
             simulation_id=simulation_id,
             runner_status=RunnerStatus.STARTING,
@@ -419,9 +442,9 @@ class SimulationRunner:
                 "--config", config_path,  # 使用完整配置文件路径
             ]
             
-            # 如果指定了最大轮数，添加到命令行参数
+            # C3：始终把已限制的有效轮数传给子进程，确保子进程按 default/cap 截断
-            if max_rounds is not None and max_rounds > 0:
+            # （total_rounds 此处已应用 OASIS_DEFAULT_MAX_ROUNDS 与 OASIS_MAX_ROUNDS_CAP）
-                cmd.extend(["--max-rounds", str(max_rounds)])
+            cmd.extend(["--max-rounds", str(total_rounds)])
             
             # 创建主日志文件，避免 stdout/stderr 管道缓冲区满导致进程阻塞
             main_log_path = os.path.join(sim_dir, "simulation.log")
@@ -482,7 +505,7 @@ class SimulationRunner:
     def _monitor_simulation(cls, simulation_id: str, locale: str = 'zh'):
         """监控模拟进程，解析动作日志"""
         set_locale(locale)
-        sim_dir = os.path.join(cls.RUN_STATE_DIR, simulation_id)
+        sim_dir = cls._run_dir(simulation_id)
         
         # 新的日志结构：分平台的动作日志
         twitter_actions_log = os.path.join(sim_dir, "twitter", "actions.jsonl")
@@ -700,7 +723,7 @@ class SimulationRunner:
         Returns:
             True 如果所有启用的平台都已完成
         """
-        sim_dir = os.path.join(cls.RUN_STATE_DIR, state.simulation_id)
+        sim_dir = cls._run_dir(state.simulation_id)
         twitter_log = os.path.join(sim_dir, "twitter", "actions.jsonl")
         reddit_log = os.path.join(sim_dir, "reddit", "actions.jsonl")
         
@@ -910,7 +933,7 @@ class SimulationRunner:
         Returns:
             完整的动作列表（按时间戳排序，新的在前）
         """
-        sim_dir = os.path.join(cls.RUN_STATE_DIR, simulation_id)
+        sim_dir = cls._run_dir(simulation_id)
         actions = []
         
         # 读取 Twitter 动作文件（根据文件路径自动设置 platform 为 twitter）
@@ -1124,7 +1147,7 @@ class SimulationRunner:
         """
         import shutil
         
-        sim_dir = os.path.join(cls.RUN_STATE_DIR, simulation_id)
+        sim_dir = cls._run_dir(simulation_id)
         
         if not os.path.exists(sim_dir):
             return {"success": True, "message": "模拟目录不存在，无需清理"}
@@ -1242,7 +1265,7 @@ class SimulationRunner:
                     
                     # 同时更新 state.json，将状态设为 stopped
                     try:
-                        sim_dir = os.path.join(cls.RUN_STATE_DIR, simulation_id)
+                        sim_dir = cls._run_dir(simulation_id)
                         state_file = os.path.join(sim_dir, "state.json")
                         logger.info(f"尝试更新 state.json: {state_file}")
                         if os.path.exists(state_file):
@@ -1381,7 +1404,7 @@ class SimulationRunner:
         Returns:
             True 表示环境存活，False 表示环境已关闭
         """
-        sim_dir = os.path.join(cls.RUN_STATE_DIR, simulation_id)
+        sim_dir = cls._run_dir(simulation_id)
         if not os.path.exists(sim_dir):
             return False
 
@@ -1399,7 +1422,7 @@ class SimulationRunner:
         Returns:
             状态详情字典，包含 status, twitter_available, reddit_available, timestamp
         """
-        sim_dir = os.path.join(cls.RUN_STATE_DIR, simulation_id)
+        sim_dir = cls._run_dir(simulation_id)
         status_file = os.path.join(sim_dir, "env_status.json")
         
         default_status = {
@@ -1453,7 +1476,7 @@ class SimulationRunner:
             ValueError: 模拟不存在或环境未运行
             TimeoutError: 等待响应超时
         """
-        sim_dir = os.path.join(cls.RUN_STATE_DIR, simulation_id)
+        sim_dir = cls._run_dir(simulation_id)
         if not os.path.exists(sim_dir):
             raise ValueError(f"模拟不存在: {simulation_id}")
 
@@ -1515,7 +1538,7 @@ class SimulationRunner:
             ValueError: 模拟不存在或环境未运行
             TimeoutError: 等待响应超时
         """
-        sim_dir = os.path.join(cls.RUN_STATE_DIR, simulation_id)
+        sim_dir = cls._run_dir(simulation_id)
         if not os.path.exists(sim_dir):
             raise ValueError(f"模拟不存在: {simulation_id}")
 
@@ -1572,7 +1595,7 @@ class SimulationRunner:
         Returns:
             全局采访结果字典
         """
-        sim_dir = os.path.join(cls.RUN_STATE_DIR, simulation_id)
+        sim_dir = cls._run_dir(simulation_id)
         if not os.path.exists(sim_dir):
             raise ValueError(f"模拟不存在: {simulation_id}")
 
@@ -1625,7 +1648,7 @@ class SimulationRunner:
         Returns:
             操作结果字典
         """
-        sim_dir = os.path.join(cls.RUN_STATE_DIR, simulation_id)
+        sim_dir = cls._run_dir(simulation_id)
         if not os.path.exists(sim_dir):
             raise ValueError(f"模拟不存在: {simulation_id}")
         
@@ -1736,7 +1759,7 @@ class SimulationRunner:
         Returns:
             Interview历史记录列表
         """
-        sim_dir = os.path.join(cls.RUN_STATE_DIR, simulation_id)
+        sim_dir = cls._run_dir(simulation_id)
         
         results = []
         

backend/app/utils/logger.py

@@ -27,17 +27,23 @@ def _ensure_utf8_stdout():
 LOG_DIR = os.path.join(os.path.dirname(os.path.dirname(os.path.dirname(__file__))), 'logs')
 
 
-def setup_logger(name: str = 'mirofish', level: int = logging.DEBUG) -> logging.Logger:
+def setup_logger(name: str = 'mirofish', level: int = None) -> logging.Logger:
     """
     设置日志器
-    
+
     Args:
         name: 日志器名称
-        level: 日志级别
+        level: 日志级别（None 时按 FLASK_DEBUG 自动选择）
-        
+
     Returns:
         配置好的日志器
     """
+    # H5：生产模式（FLASK_DEBUG=false）下用 INFO —— 避免把请求体/调试细节（可能含上传内容、
+    # 提示词、客户端传入的凭据）以明文写入轮转日志文件。开发模式仍用 DEBUG。
+    if level is None:
+        from ..config import Config
+        level = logging.DEBUG if Config.DEBUG else logging.INFO
+
     # 确保日志目录存在
     os.makedirs(LOG_DIR, exist_ok=True)
     
@@ -71,7 +77,7 @@ def setup_logger(name: str = 'mirofish', level: int = logging.DEBUG) -> logging.
         backupCount=5,
         encoding='utf-8'
     )
-    file_handler.setLevel(logging.DEBUG)
+    file_handler.setLevel(level)
     file_handler.setFormatter(detailed_formatter)
     
     # 2. 控制台处理器 - 简洁日志（INFO及以上）

backend/app/utils/security.py

@@ -0,0 +1,69 @@
+"""
+安全辅助函数（评审 H5 / 上传嗅探 / 路径校验）。
+- safe_traceback: 仅在 DEBUG 时把堆栈返回客户端，生产环境只记到服务端日志
+- validate_id:    校验 URL 传入的 id，避免落入文件系统 sink（路径穿越/异常字符）
+- upload_content_ok: 按魔术字节嗅探上传内容，防止改扩展名的二进制混入
+"""
+
+import os
+import re
+import traceback as _traceback
+
+from .logger import get_logger
+
+# 允许的 id 字符集：字母数字 + 下划线 + 连字符，长度 1-64。
+# 排除 '/'、'.'、'\\' 等可用于路径穿越或越级的字符。
+_ID_RE = re.compile(r'^[A-Za-z0-9_-]{1,64}$')
+
+
+def safe_traceback() -> str:
+    """
+    H5：完整堆栈始终写入服务端日志；仅在 DEBUG 模式才把堆栈返回客户端，
+    生产环境返回通用提示，避免向客户端泄露内部路径/栈帧。
+    """
+    # 延迟导入 Config，避免与配置模块的潜在循环依赖
+    from ..config import Config
+    tb = _traceback.format_exc()
+    get_logger('mirofish.error').error(tb)
+    return tb if Config.DEBUG else 'Internal server error (see server logs)'
+
+
+def safe_error(e) -> str:
+    """
+    客户端可见的错误文案：DEBUG 模式返回异常消息，生产环境返回通用提示，
+    避免异常消息本身（如 FileNotFoundError 的路径、ValueError 里的配置值）泄露给客户端。
+    完整异常仍由各调用点的 logger.error / safe_traceback 记到服务端日志。
+    """
+    from ..config import Config
+    return str(e) if Config.DEBUG else 'Internal server error (see server logs)'
+
+
+def validate_id(value: str, kind: str = 'id') -> str:
+    """
+    路径校验：拒绝任何不匹配 _ID_RE 的 id（含 '..'、'/'、空值），
+    在 id 进入 os.path.join / makedirs / rmtree 之前阻断路径穿越。
+    """
+    if not isinstance(value, str) or not _ID_RE.match(value):
+        raise ValueError(f'Invalid {kind}: {value!r}')
+    return value
+
+
+def upload_content_ok(file_storage, filename: str) -> bool:
+    """
+    上传嗅探：按扩展名校验文件头部内容，使改名的二进制无法通过扩展名白名单。
+    - pdf：必须以 %PDF- 开头
+    - txt/md/markdown：头部不得含 NUL 字节（典型二进制特征）
+    读取后将流指针复位，避免影响后续保存。
+    """
+    ext = os.path.splitext(filename)[1].lower().lstrip('.')
+    head = file_storage.read(512)
+    file_storage.seek(0)
+    if ext == 'pdf':
+        return head[:5] == b'%PDF-'
+    if ext in ('txt', 'md', 'markdown'):
+        # 接受带 BOM 的 UTF-16/UTF-32/UTF-8 文本（这些合法文本会含 NUL 字节，
+        # 与 file_parser 的多编码支持一致）；否则按头部含 NUL 判定为二进制并拒绝。
+        if head.startswith((b'\xff\xfe', b'\xfe\xff', b'\xef\xbb\xbf')):
+            return True
+        return b'\x00' not in head
+    return False

backend/pyproject.toml

@@ -12,7 +12,9 @@ dependencies = [
     # 核心框架
     "flask>=3.0.0",
     "flask-cors>=6.0.0",
-    
+    # 生产 WSGI 服务器（C1：替代 Werkzeug 开发服务器/调试器；须以 -w 1 --threads N 单进程启动）
+    "gunicorn>=21.0.0",
+
     # LLM 相关
     "openai>=1.0.0",
     

backend/requirements.txt

@@ -8,6 +8,9 @@
 # ============= 核心框架 =============
 flask>=3.0.0
 flask-cors>=6.0.0
+# 生产 WSGI 服务器（C1：替代 Flask 自带的 Werkzeug 开发服务器/调试器）
+# 注意：因模拟运行态保存在进程内类变量，必须以单 worker 多线程启动（-w 1 --threads N）
+gunicorn>=21.0.0
 
 # ============= LLM 相关 =============
 # OpenAI SDK（统一使用 OpenAI 格式调用 LLM）

backend/scripts/run_parallel_simulation.py

@@ -81,6 +81,11 @@ from typing import Dict, Any, List, Optional, Tuple
 _shutdown_event = None
 _cleanup_done = False
 
+# C4：模拟超时（秒）。从环境变量读取（子进程继承 Flask 父进程的环境）。
+# 每轮 env.step 超时防止单轮因 LLM/网络挂起而永久 wedge；总超时为整轮模拟的硬墙钟上限。
+_ROUND_TIMEOUT_SEC = int(os.environ.get("OASIS_ROUND_TIMEOUT_SEC", "600"))
+_RUN_TIMEOUT_SEC = int(os.environ.get("OASIS_RUN_TIMEOUT_SEC", "7200"))
+
 # 添加 backend 目录到路径
 # 脚本固定位于 backend/scripts/ 目录
 _scripts_dir = os.path.dirname(os.path.abspath(__file__))
@@ -333,8 +338,10 @@ class ParallelIPCHandler:
                 action_args={"prompt": prompt}
             )
             actions = {agent: interview_action}
-            await env.step(actions)
+            # C4：采访 env.step 加超时；TimeoutError 会被本方法的 except Exception 捕获并返回错误响应，
-            
+            # 不会让持久化命令循环永久卡死。
+            await asyncio.wait_for(env.step(actions), timeout=_ROUND_TIMEOUT_SEC)
+
             result = self._get_interview_result(agent_id, actual_platform)
             result["platform"] = actual_platform
             return result
@@ -466,7 +473,7 @@ class ParallelIPCHandler:
                         print(f"  警告: 无法获取Twitter Agent {agent_id}: {e}")
                 
                 if twitter_actions:
-                    await self.twitter_env.step(twitter_actions)
+                    await asyncio.wait_for(self.twitter_env.step(twitter_actions), timeout=_ROUND_TIMEOUT_SEC)  # C4：批量采访超时
                     
                     for interview in twitter_interviews:
                         agent_id = interview.get("agent_id")
@@ -493,7 +500,7 @@ class ParallelIPCHandler:
                         print(f"  警告: 无法获取Reddit Agent {agent_id}: {e}")
                 
                 if reddit_actions:
-                    await self.reddit_env.step(reddit_actions)
+                    await asyncio.wait_for(self.reddit_env.step(reddit_actions), timeout=_ROUND_TIMEOUT_SEC)  # C4：批量采访超时
                     
                     for interview in reddit_interviews:
                         agent_id = interview.get("agent_id")
@@ -1203,8 +1210,12 @@ async def run_twitter_simulation(
                 pass
         
         if initial_actions:
-            await result.env.step(initial_actions)
+            # C4：初始帖子的 env.step 也加超时 —— 否则在进入受保护的主循环前就可能因 LLM/网络挂起而 wedge
-            log_info(f"已发布 {len(initial_actions)} 条初始帖子")
+            try:
+                await asyncio.wait_for(result.env.step(initial_actions), timeout=_ROUND_TIMEOUT_SEC)
+                log_info(f"已发布 {len(initial_actions)} 条初始帖子")
+            except asyncio.TimeoutError:
+                log_info(f"[超时] 初始帖子 env.step 超过 {_ROUND_TIMEOUT_SEC}s，跳过初始帖子继续")
     
     # 记录 round 0 结束
     if action_logger:
@@ -1250,8 +1261,20 @@ async def run_twitter_simulation(
                 action_logger.log_round_end(round_num + 1, 0)
             continue
         
+        # C4：总时长上限 —— 超过则优雅停止（保留环境，后续仍可 close/interview）
+        if (datetime.now() - start_time).total_seconds() > _RUN_TIMEOUT_SEC:
+            log_info(f"[超时] 模拟总时长超过 {_RUN_TIMEOUT_SEC}s，在第 {round_num + 1} 轮停止")
+            break
+
         actions = {agent: LLMAction() for _, agent in active_agents}
-        await result.env.step(actions)
+        # C4：每轮超时 —— 防止 env.step 因 LLM/网络挂起而永久 wedge
+        try:
+            await asyncio.wait_for(result.env.step(actions), timeout=_ROUND_TIMEOUT_SEC)
+        except asyncio.TimeoutError:
+            log_info(f"[超时] 第 {round_num + 1} 轮 env.step 超过 {_ROUND_TIMEOUT_SEC}s，跳过并停止循环")
+            if action_logger:
+                action_logger.log_round_end(round_num + 1, 0)
+            break
         
         # 从数据库获取实际执行的动作并记录
         actual_actions, last_rowid = fetch_new_actions_from_db(
@@ -1402,8 +1425,12 @@ async def run_reddit_simulation(
                 pass
         
         if initial_actions:
-            await result.env.step(initial_actions)
+            # C4：初始帖子的 env.step 也加超时 —— 否则在进入受保护的主循环前就可能因 LLM/网络挂起而 wedge
-            log_info(f"已发布 {len(initial_actions)} 条初始帖子")
+            try:
+                await asyncio.wait_for(result.env.step(initial_actions), timeout=_ROUND_TIMEOUT_SEC)
+                log_info(f"已发布 {len(initial_actions)} 条初始帖子")
+            except asyncio.TimeoutError:
+                log_info(f"[超时] 初始帖子 env.step 超过 {_ROUND_TIMEOUT_SEC}s，跳过初始帖子继续")
     
     # 记录 round 0 结束
     if action_logger:
@@ -1449,8 +1476,20 @@ async def run_reddit_simulation(
                 action_logger.log_round_end(round_num + 1, 0)
             continue
         
+        # C4：总时长上限 —— 超过则优雅停止（保留环境，后续仍可 close/interview）
+        if (datetime.now() - start_time).total_seconds() > _RUN_TIMEOUT_SEC:
+            log_info(f"[超时] 模拟总时长超过 {_RUN_TIMEOUT_SEC}s，在第 {round_num + 1} 轮停止")
+            break
+
         actions = {agent: LLMAction() for _, agent in active_agents}
-        await result.env.step(actions)
+        # C4：每轮超时 —— 防止 env.step 因 LLM/网络挂起而永久 wedge
+        try:
+            await asyncio.wait_for(result.env.step(actions), timeout=_ROUND_TIMEOUT_SEC)
+        except asyncio.TimeoutError:
+            log_info(f"[超时] 第 {round_num + 1} 轮 env.step 超过 {_ROUND_TIMEOUT_SEC}s，跳过并停止循环")
+            if action_logger:
+                action_logger.log_round_end(round_num + 1, 0)
+            break
         
         # 从数据库获取实际执行的动作并记录
         actual_actions, last_rowid = fetch_new_actions_from_db(
@@ -1577,16 +1616,34 @@ async def main():
     reddit_result: Optional[PlatformSimulation] = None
     
     if args.twitter_only:
-        twitter_result = await run_twitter_simulation(config, simulation_dir, twitter_logger, log_manager, args.max_rounds)
+        # C4：与并行路径对称 —— 单平台非超时异常也隔离为 None 并记录，确保后续 env.close 块仍可达
+        try:
+            twitter_result = await run_twitter_simulation(config, simulation_dir, twitter_logger, log_manager, args.max_rounds)
+        except Exception as e:
+            log_manager.error(f"[Twitter] 模拟异常，已隔离: {e}")
+            twitter_result = None
     elif args.reddit_only:
-        reddit_result = await run_reddit_simulation(config, simulation_dir, reddit_logger, log_manager, args.max_rounds)
+        try:
+            reddit_result = await run_reddit_simulation(config, simulation_dir, reddit_logger, log_manager, args.max_rounds)
+        except Exception as e:
+            log_manager.error(f"[Reddit] 模拟异常，已隔离: {e}")
+            reddit_result = None
     else:
         # 并行运行（每个平台使用独立的日志记录器）
+        # C4：return_exceptions=True —— 一个平台抛异常（如 LLM 401/429/配额）不再取消另一平台，
+        # 也不会绕过下方的 env.close（否则环境泄漏，违背“优雅停止、保留环境”的设计）。
         results = await asyncio.gather(
             run_twitter_simulation(config, simulation_dir, twitter_logger, log_manager, args.max_rounds),
             run_reddit_simulation(config, simulation_dir, reddit_logger, log_manager, args.max_rounds),
+            return_exceptions=True,
         )
         twitter_result, reddit_result = results
+        if isinstance(twitter_result, BaseException):
+            log_manager.error(f"[Twitter] 模拟异常，已隔离: {twitter_result}")
+            twitter_result = None
+        if isinstance(reddit_result, BaseException):
+            log_manager.error(f"[Reddit] 模拟异常，已隔离: {reddit_result}")
+            reddit_result = None
     
     total_elapsed = (datetime.now() - start_time).total_seconds()
     log_manager.info("=" * 60)

backend/scripts/run_reddit_simulation.py

@@ -29,6 +29,10 @@ from typing import Dict, Any, List, Optional
 _shutdown_event = None
 _cleanup_done = False
 
+# C4：模拟超时（秒），从环境变量读取（子进程继承父进程环境）
+_ROUND_TIMEOUT_SEC = int(os.environ.get("OASIS_ROUND_TIMEOUT_SEC", "600"))
+_RUN_TIMEOUT_SEC = int(os.environ.get("OASIS_RUN_TIMEOUT_SEC", "7200"))
+
 # 添加项目路径
 _scripts_dir = os.path.dirname(os.path.abspath(__file__))
 _backend_dir = os.path.abspath(os.path.join(_scripts_dir, '..'))
@@ -230,7 +234,7 @@ class IPCHandler:
             
             # 执行Interview
             actions = {agent: interview_action}
-            await self.env.step(actions)
+            await asyncio.wait_for(self.env.step(actions), timeout=_ROUND_TIMEOUT_SEC)  # C4：采访超时（TimeoutError 由本块 except 捕获）
             
             # 从数据库获取结果
             result = self._get_interview_result(agent_id)
@@ -276,7 +280,7 @@ class IPCHandler:
                 return False
             
             # 执行批量Interview
-            await self.env.step(actions)
+            await asyncio.wait_for(self.env.step(actions), timeout=_ROUND_TIMEOUT_SEC)  # C4：采访超时（TimeoutError 由本块 except 捕获）
             
             # 获取所有结果
             results = {}
@@ -616,8 +620,12 @@ class RedditSimulationRunner:
                     print(f"  警告: 无法为Agent {agent_id}创建初始帖子: {e}")
             
             if initial_actions:
-                await self.env.step(initial_actions)
+                # C4：初始帖子的 env.step 也加超时，避免进入主循环前就因 LLM/网络挂起而 wedge
-                print(f"  已发布 {len(initial_actions)} 条初始帖子")
+                try:
+                    await asyncio.wait_for(self.env.step(initial_actions), timeout=_ROUND_TIMEOUT_SEC)
+                    print(f"  已发布 {len(initial_actions)} 条初始帖子")
+                except asyncio.TimeoutError:
+                    print(f"  [超时] 初始帖子 env.step 超过 {_ROUND_TIMEOUT_SEC}s，跳过继续", flush=True)
         
         # 主模拟循环
         print("\n开始模拟循环...")
@@ -634,13 +642,23 @@ class RedditSimulationRunner:
             
             if not active_agents:
                 continue
-            
+
+            # C4：总时长上限 —— 超过则优雅停止
+            if (datetime.now() - start_time).total_seconds() > _RUN_TIMEOUT_SEC:
+                print(f"[超时] 模拟总时长超过 {_RUN_TIMEOUT_SEC}s，在第 {round_num + 1} 轮停止", flush=True)
+                break
+
             actions = {
                 agent: LLMAction()
                 for _, agent in active_agents
             }
-            
+
-            await self.env.step(actions)
+            # C4：每轮超时 —— 防止 env.step 因 LLM/网络挂起而永久 wedge
+            try:
+                await asyncio.wait_for(self.env.step(actions), timeout=_ROUND_TIMEOUT_SEC)
+            except asyncio.TimeoutError:
+                print(f"[超时] 第 {round_num + 1} 轮 env.step 超过 {_ROUND_TIMEOUT_SEC}s，跳过并停止循环", flush=True)
+                break
             
             if (round_num + 1) % 10 == 0 or round_num == 0:
                 elapsed = (datetime.now() - start_time).total_seconds()

backend/scripts/run_twitter_simulation.py

@@ -29,6 +29,10 @@ from typing import Dict, Any, List, Optional
 _shutdown_event = None
 _cleanup_done = False
 
+# C4：模拟超时（秒），从环境变量读取（子进程继承父进程环境）
+_ROUND_TIMEOUT_SEC = int(os.environ.get("OASIS_ROUND_TIMEOUT_SEC", "600"))
+_RUN_TIMEOUT_SEC = int(os.environ.get("OASIS_RUN_TIMEOUT_SEC", "7200"))
+
 # 添加项目路径
 _scripts_dir = os.path.dirname(os.path.abspath(__file__))
 _backend_dir = os.path.abspath(os.path.join(_scripts_dir, '..'))
@@ -230,7 +234,7 @@ class IPCHandler:
             
             # 执行Interview
             actions = {agent: interview_action}
-            await self.env.step(actions)
+            await asyncio.wait_for(self.env.step(actions), timeout=_ROUND_TIMEOUT_SEC)  # C4：采访超时（TimeoutError 由本块 except 捕获）
             
             # 从数据库获取结果
             result = self._get_interview_result(agent_id)
@@ -276,7 +280,7 @@ class IPCHandler:
                 return False
             
             # 执行批量Interview
-            await self.env.step(actions)
+            await asyncio.wait_for(self.env.step(actions), timeout=_ROUND_TIMEOUT_SEC)  # C4：采访超时（TimeoutError 由本块 except 捕获）
             
             # 获取所有结果
             results = {}
@@ -623,8 +627,12 @@ class TwitterSimulationRunner:
                     print(f"  警告: 无法为Agent {agent_id}创建初始帖子: {e}")
             
             if initial_actions:
-                await self.env.step(initial_actions)
+                # C4：初始帖子的 env.step 也加超时，避免进入主循环前就因 LLM/网络挂起而 wedge
-                print(f"  已发布 {len(initial_actions)} 条初始帖子")
+                try:
+                    await asyncio.wait_for(self.env.step(initial_actions), timeout=_ROUND_TIMEOUT_SEC)
+                    print(f"  已发布 {len(initial_actions)} 条初始帖子")
+                except asyncio.TimeoutError:
+                    print(f"  [超时] 初始帖子 env.step 超过 {_ROUND_TIMEOUT_SEC}s，跳过继续", flush=True)
         
         # 主模拟循环
         print("\n开始模拟循环...")
@@ -643,15 +651,25 @@ class TwitterSimulationRunner:
             
             if not active_agents:
                 continue
-            
+
+            # C4：总时长上限 —— 超过则优雅停止
+            if (datetime.now() - start_time).total_seconds() > _RUN_TIMEOUT_SEC:
+                print(f"[超时] 模拟总时长超过 {_RUN_TIMEOUT_SEC}s，在第 {round_num + 1} 轮停止", flush=True)
+                break
+
             # 构建动作
             actions = {
                 agent: LLMAction()
                 for _, agent in active_agents
             }
-            
+
             # 执行动作
-            await self.env.step(actions)
+            # C4：每轮超时 —— 防止 env.step 因 LLM/网络挂起而永久 wedge
+            try:
+                await asyncio.wait_for(self.env.step(actions), timeout=_ROUND_TIMEOUT_SEC)
+            except asyncio.TimeoutError:
+                print(f"[超时] 第 {round_num + 1} 轮 env.step 超过 {_ROUND_TIMEOUT_SEC}s，跳过并停止循环", flush=True)
+                break
             
             # 打印进度
             if (round_num + 1) % 10 == 0 or round_num == 0:

backend/uv.lock

@@ -511,6 +511,18 @@ wheels = [
     { url = "https://files.pythonhosted.org/packages/51/c7/b64cae5dba3a1b138d7123ec36bb5ccd39d39939f18454407e5468f4763f/fsspec-2025.12.0-py3-none-any.whl", hash = "sha256:8bf1fe301b7d8acfa6e8571e3b1c3d158f909666642431cc78a1b7b4dbc5ec5b", size = 201422, upload-time = "2025-12-03T15:23:41.434Z" },
 ]
 
+[[package]]
+name = "gunicorn"
+version = "26.0.0"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "packaging" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/6d/b7/a4a3f632f823e432ce6bc65f62961b7980c898c77f075a2f7118cb3846fe/gunicorn-26.0.0.tar.gz", hash = "sha256:ca9346f85e3a4aeeb64d491045c16b9a35647abd37ea15efe53080eb8b090baf", size = 727286, upload-time = "2026-05-05T06:38:25.529Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/e6/40/9c2384fc2be4ad25dd4a49decd5ad9ea5a3639814c11bd40ab77cb9f0a14/gunicorn-26.0.0-py3-none-any.whl", hash = "sha256:40233d26a5f0d1872916188c276e21641155111c2853f0c2cd55260aec0d24fc", size = 212009, upload-time = "2026-05-05T06:38:23.007Z" },
+]
+
 [[package]]
 name = "h11"
 version = "0.16.0"
@@ -994,6 +1006,7 @@ dependencies = [
     { name = "charset-normalizer" },
     { name = "flask" },
     { name = "flask-cors" },
+    { name = "gunicorn" },
     { name = "openai" },
     { name = "pydantic" },
     { name = "pymupdf" },
@@ -1022,6 +1035,7 @@ requires-dist = [
     { name = "charset-normalizer", specifier = ">=3.0.0" },
     { name = "flask", specifier = ">=3.0.0" },
     { name = "flask-cors", specifier = ">=6.0.0" },
+    { name = "gunicorn", specifier = ">=21.0.0" },
     { name = "openai", specifier = ">=1.0.0" },
     { name = "pipreqs", marker = "extra == 'dev'", specifier = ">=0.5.0" },
     { name = "pydantic", specifier = ">=2.0.0" },

docker-compose.yml

@@ -3,6 +3,13 @@ services:
     image: ghcr.io/666ghj/mirofish:latest
     # 加速镜像（如拉取缓慢可替换上方地址）
     # image: ghcr.nju.edu.cn/666ghj/mirofish:latest
+    # C2：本地构建以把前端 API Key 烤进打包产物。`docker compose up --build` 会用根 .env 里的
+    # VITE_API_KEY 作为 build-arg；若直接拉取上方预构建镜像（不 --build），其内置的 key 不可控，
+    # 此时请改用 AUTH_ENABLED=false（单机/内网）或自行构建带 VITE_API_KEY 的镜像。
+    build:
+      context: .
+      args:
+        VITE_API_KEY: ${VITE_API_KEY:-}
     container_name: mirofish
     env_file:
       - .env

frontend/.env.example

@@ -0,0 +1,9 @@
+# 前端构建期变量（Vite 读取，仅 VITE_ 前缀会暴露到客户端包）
+# 本地前端构建：复制为 frontend/.env 并填写；Docker 构建则由 docker compose 经 build-arg 注入（见根 .env 的 VITE_API_KEY）。
+
+# 必须等于后端 .env 的 API_KEY —— 打包后的 UI 会用它作为 X-API-Key 调用 /api/*。
+# ⚠️ 会被打进客户端包、可被任何访问者提取，不能当作多租户隔离手段（见 README 安全说明）。
+VITE_API_KEY=
+
+# 后端 API 基地址（默认走前端预览/开发服务器的 /api 代理到后端；如直连后端请填写完整地址）
+# VITE_API_BASE_URL=http://localhost:5001

frontend/index.html

@@ -6,6 +6,11 @@
     <link rel="preconnect" href="https://fonts.gstatic.com" crossorigin>
     <link href="https://fonts.googleapis.com/css2?family=Inter:wght@300;400;500;600;700&family=JetBrains+Mono:wght@100..800&family=Noto+Sans+SC:wght@300;400;500;700;800;900&family=Space+Grotesk:wght@300..700&display=swap" rel="stylesheet">
     <meta charset="UTF-8" />
+    <!-- CSP（纵深防御，配合 DOMPurify 抵御 XSS）。注意：
+         - script-src 含 'unsafe-inline' 仅因本文件顶部有一段内联 lang 脚本；移除该脚本可去掉它以收紧策略。
+         - connect-src 默认含本机后端；若后端在其它域，部署时需把该域加入 connect-src。
+         - frame-ancestors 在 <meta> 中无效，已由服务端/预览响应头（X-Frame-Options / CSP 头）补充。 -->
+    <meta http-equiv="Content-Security-Policy" content="default-src 'self'; script-src 'self' 'unsafe-inline'; style-src 'self' 'unsafe-inline' https://fonts.googleapis.com; font-src 'self' https://fonts.gstatic.com data:; img-src 'self' data: blob:; connect-src 'self' http://localhost:5001; object-src 'none'; base-uri 'self'; form-action 'self'" />
     <link rel="icon" type="image/png" href="/icon.png" />
     <meta name="viewport" content="width=device-width, initial-scale=1.0" />
     <meta name="description" content="MiroFish - 社交媒体舆论模拟系统" />

frontend/package-lock.json

@@ -10,6 +10,7 @@
       "dependencies": {
         "axios": "^1.14.0",
         "d3": "^7.9.0",
+        "dompurify": "^3.4.10",
         "vue": "^3.5.24",
         "vue-i18n": "^11.3.0",
         "vue-router": "^4.6.3"
@@ -938,6 +939,13 @@
       "dev": true,
       "license": "MIT"
     },
+    "node_modules/@types/trusted-types": {
+      "version": "2.0.7",
+      "resolved": "https://registry.npmjs.org/@types/trusted-types/-/trusted-types-2.0.7.tgz",
+      "integrity": "sha512-ScaPdn1dQczgbl0QFTeTOmVHFULt394XJgOQNoyVhZ6r2vLnMLJfBPd53SB52T/3G36VI1/g2MZaX0cwDuXsfw==",
+      "license": "MIT",
+      "optional": true
+    },
     "node_modules/@vitejs/plugin-vue": {
       "version": "6.0.2",
       "resolved": "https://registry.npmjs.org/@vitejs/plugin-vue/-/plugin-vue-6.0.2.tgz",
@@ -1435,7 +1443,6 @@
       "resolved": "https://registry.npmjs.org/d3-selection/-/d3-selection-3.0.0.tgz",
       "integrity": "sha512-fmTRWbNMmsmWq6xJV8D19U/gw/bwrHfNXxrIN+HfZgnzqTHp9jOmKMhsTUjXOJnZOdZY9Q28y4yebKzqDKlxlQ==",
       "license": "ISC",
-      "peer": true,
       "engines": {
         "node": ">=12"
       }
@@ -1538,6 +1545,15 @@
         "node": ">=0.4.0"
       }
     },
+    "node_modules/dompurify": {
+      "version": "3.4.10",
+      "resolved": "https://registry.npmjs.org/dompurify/-/dompurify-3.4.10.tgz",
+      "integrity": "sha512-0xzNv0e7oYC6yyuOGZIABPM4qtg3QxLFniDNPP4ZP90wR8Yq3zgwpRbrNiT4N3IKqDbbYFEJLV+JWEs19aZ//w==",
+      "license": "(MPL-2.0 OR Apache-2.0)",
+      "optionalDependencies": {
+        "@types/trusted-types": "^2.0.7"
+      }
+    },
     "node_modules/dunder-proto": {
       "version": "1.0.1",
       "resolved": "https://registry.npmjs.org/dunder-proto/-/dunder-proto-1.0.1.tgz",
@@ -1913,7 +1929,6 @@
       "integrity": "sha512-QP88BAKvMam/3NxH6vj2o21R6MjxZUAd6nlwAS/pnGvN9IVLocLHxGYIzFhg6fUQ+5th6P4dv4eW9jX3DSIj7A==",
       "dev": true,
       "license": "MIT",
-      "peer": true,
       "engines": {
         "node": ">=12"
       },
@@ -2053,7 +2068,6 @@
       "integrity": "sha512-ITcnkFeR3+fI8P1wMgItjGrR10170d8auB4EpMLPqmx6uxElH3a/hHGQabSHKdqd4FXWO1nFIp9rRn7JQ34ACQ==",
       "dev": true,
       "license": "MIT",
-      "peer": true,
       "dependencies": {
         "esbuild": "^0.25.0",
         "fdir": "^6.5.0",
@@ -2128,7 +2142,6 @@
       "resolved": "https://registry.npmjs.org/vue/-/vue-3.5.25.tgz",
       "integrity": "sha512-YLVdgv2K13WJ6n+kD5owehKtEXwdwXuj2TTyJMsO7pSeKw2bfRNZGjhB7YzrpbMYj5b5QsUebHpOqR3R3ziy/g==",
       "license": "MIT",
-      "peer": true,
       "dependencies": {
         "@vue/compiler-dom": "3.5.25",
         "@vue/compiler-sfc": "3.5.25",

frontend/package.json

@@ -11,6 +11,7 @@
   "dependencies": {
     "axios": "^1.14.0",
     "d3": "^7.9.0",
+    "dompurify": "^3.4.10",
     "vue": "^3.5.24",
     "vue-i18n": "^11.3.0",
     "vue-router": "^4.6.3"

frontend/src/api/index.js

@@ -10,10 +10,19 @@ const service = axios.create({
   }
 })
 
+// API Key（C2）：后端默认对 /api/* 强制鉴权，前端需在每个请求带上 X-API-Key。
+// 注意：构建到客户端包里的 VITE_API_KEY 是【可被任何访问者从 JS 包中提取】的，因此对“公开部署”
+// 它只能挡住不加载页面的脚本式滥用，不能当作多租户隔离手段。真正的多租户场景应改为会话登录鉴权，
+// 或在网关处注入按用户签发的 token；单机/内网/网关后部署时此值足够。
+const API_KEY = import.meta.env.VITE_API_KEY || ''
+
 // 请求拦截器
 service.interceptors.request.use(
   config => {
     config.headers['Accept-Language'] = i18n.global.locale.value
+    if (API_KEY) {
+      config.headers['X-API-Key'] = API_KEY
+    }
     return config
   },
   error => {

frontend/src/components/Step4Report.vue

@@ -391,6 +391,7 @@
 
 <script setup>
 import { ref, computed, watch, onMounted, onUnmounted, nextTick, h, reactive } from 'vue'
+import DOMPurify from 'dompurify'
 import { useRouter } from 'vue-router'
 import { useI18n } from 'vue-i18n'
 import { getAgentLog, getConsoleLog } from '../api/report'
@@ -1531,11 +1532,14 @@ const InterviewDisplay = {
                   ]),
                   h('div', {
                     class: ['qa-text', 'answer-text', { 'placeholder-text': isPlaceholder }],
-                    innerHTML: isPlaceholder
+                    // H1：answerText 来自不可信 LLM 回答，消毒后再入 innerHTML，防存储型 XSS
-                      ? answerText
+                    innerHTML: DOMPurify.sanitize(
-                      : formatAnswer(answerText, isExpanded)
+                      isPlaceholder
-                          .replace(/\*\*(.+?)\*\*/g, '<strong>$1</strong>')
+                        ? answerText
-                          .replace(/\n/g, '<br>')
+                        : formatAnswer(answerText, isExpanded)
+                            .replace(/\*\*(.+?)\*\*/g, '<strong>$1</strong>')
+                            .replace(/\n/g, '<br>')
+                    )
                   }),
                   // Expand/Collapse Button（占位文本不显示）
                   !isPlaceholder && answerText.length > 400 && h('button', {
@@ -1973,7 +1977,8 @@ const renderMarkdown = (content) => {
   }
   html = tokens.join('')
 
-  return html
+  // H1：消毒最终 HTML，剥离来自不可信 LLM 报告内容的脚本/事件处理器，防止存储型 XSS
+  return DOMPurify.sanitize(html)
 }
 
 const getTimelineItemClass = (log, idx, total) => {

frontend/src/components/Step5Interaction.vue

@@ -412,6 +412,7 @@
 
 <script setup>
 import { ref, computed, watch, onMounted, onUnmounted, nextTick } from 'vue'
+import DOMPurify from 'dompurify'
 import { useI18n } from 'vue-i18n'
 import { chatWithReport, getReport, getAgentLog } from '../api/report'
 import { interviewAgents, getSimulationProfilesRealtime } from '../api/simulation'
@@ -638,7 +639,8 @@ const renderMarkdown = (content) => {
   }
   html = tokens.join('')
 
-  return html
+  // H1：消毒最终 HTML，剥离来自不可信 LLM/采访内容的脚本/事件处理器，防止存储型 XSS
+  return DOMPurify.sanitize(html)
 }
 
 // Chat Methods

frontend/vite.config.js

@@ -21,5 +21,27 @@ export default defineConfig({
         secure: false
       }
     }
+  },
+  // C1：生产镜像用 `vite preview` 提供已构建的静态产物（而非开发服务器）。
+  // preview 默认不套用 server.proxy，需单独声明，否则 /api 不被转发到后端。
+  // host:'0.0.0.0' 必需：默认仅绑 localhost，在容器内会让 Docker 端口映射（3000:3000）无法触达。
+  preview: {
+    host: '0.0.0.0',
+    port: 3000,
+    // 安全响应头（生产由 vite preview 提供前端时生效）。frame-ancestors 仅在响应头中有效，
+    // 故在此补充；其余 CSP 指令由 index.html 的 <meta> 提供（两者一致）。
+    headers: {
+      'X-Frame-Options': 'DENY',
+      'X-Content-Type-Options': 'nosniff',
+      'Referrer-Policy': 'strict-origin-when-cross-origin',
+      'Content-Security-Policy': "frame-ancestors 'none'"
+    },
+    proxy: {
+      '/api': {
+        target: 'http://localhost:5001',
+        changeOrigin: true,
+        secure: false
+      }
+    }
   }
 })

package.json

@@ -9,7 +9,10 @@
     "dev": "concurrently --kill-others -n \"backend,frontend\" -c \"green,cyan\" \"npm run backend\" \"npm run frontend\"",
     "backend": "cd backend && uv run python run.py",
     "frontend": "cd frontend && npm run dev",
-    "build": "cd frontend && npm run build"
+    "build": "cd frontend && npm run build",
+    "start": "concurrently --kill-others -n \"backend,frontend\" -c \"green,cyan\" \"npm run backend:prod\" \"npm run frontend:preview\"",
+    "backend:prod": "cd backend && uv run gunicorn -w 1 --threads 8 --timeout 120 -b 0.0.0.0:5001 'app:create_app()'",
+    "frontend:preview": "cd frontend && npm run preview"
   },
   "devDependencies": {
     "concurrently": "^9.1.2"