# Chinese translations for solaar package
# Copyright (C) 2014 THE solaar'S COPYRIGHT HOLDER
# This file is distributed under the same license as the solaar package.
# Automatically generated, 2014.
#
msgid   ""
msgstr  "Project-Id-Version: solaar 0.9.2\n"
        "Report-Msgid-Bugs-To: \n"
        "POT-Creation-Date: 2023-06-22 01:47+0800\n"
        "PO-Revision-Date: 2023-06-22 01:47+0800\n"
        "Last-Translator: Peter Dave Hello <hsu@peterdavehello.org>\n"
        "Language-Team: Peter Dave Hello <hsu@peterdavehello.org>\n"
        "Language: zh_TW\n"
        "MIME-Version: 1.0\n"
        "Content-Type: text/plain; charset=UTF-8\n"
        "Content-Transfer-Encoding: 8bit\n"
        "Plural-Forms: nplurals=1; plural=0;\n"
        "X-Language: zh_TW\n"
        "X-Source-Language: C\n"
        "X-Generator: Poedit 3.0\n"

#: lib/logitech_receiver/base_usb.py:46
msgid   "Bolt Receiver"
msgstr  "Bolt 接收器"

#: lib/logitech_receiver/base_usb.py:57
msgid   "Unifying Receiver"
msgstr  "Unifying 接收器"

#: lib/logitech_receiver/base_usb.py:67 lib/logitech_receiver/base_usb.py:78
#: lib/logitech_receiver/base_usb.py:90 lib/logitech_receiver/base_usb.py:102
#: lib/logitech_receiver/base_usb.py:114
msgid   "Nano Receiver"
msgstr  "Nano 接收器"

#: lib/logitech_receiver/base_usb.py:124
msgid   "Lightspeed Receiver"
msgstr  "Lightspeed 接收器"

#: lib/logitech_receiver/base_usb.py:133
msgid   "EX100 Receiver 27 Mhz"
msgstr  "EX100 27 Mhz 接收器"

#: lib/logitech_receiver/i18n.py:30
msgid   "empty"
msgstr  "電池已耗盡"

#: lib/logitech_receiver/i18n.py:31
msgid   "critical"
msgstr  "極低"

#: lib/logitech_receiver/i18n.py:32
msgid   "low"
msgstr  "低"

#: lib/logitech_receiver/i18n.py:33
msgid   "average"
msgstr  "平均"

#: lib/logitech_receiver/i18n.py:34
msgid   "good"
msgstr  "良好"

#: lib/logitech_receiver/i18n.py:35
msgid   "full"
msgstr  "滿格"

#: lib/logitech_receiver/i18n.py:38
msgid   "discharging"
msgstr  "放電中"

#: lib/logitech_receiver/i18n.py:39
msgid   "recharging"
msgstr  "充電中"

#: lib/logitech_receiver/i18n.py:40 lib/solaar/ui/window.py:711
msgid   "charging"
msgstr  "充電中"

#: lib/logitech_receiver/i18n.py:41
msgid   "not charging"
msgstr  "未充電"

#: lib/logitech_receiver/i18n.py:42
msgid   "almost full"
msgstr  "即將充滿"

#: lib/logitech_receiver/i18n.py:43
msgid   "charged"
msgstr  "已充滿"

#: lib/logitech_receiver/i18n.py:44
msgid   "slow recharge"
msgstr  "慢速充電"

#: lib/logitech_receiver/i18n.py:45
msgid   "invalid battery"
msgstr  "電池無效"

#: lib/logitech_receiver/i18n.py:46
msgid   "thermal error"
msgstr  "溫度異常"

#: lib/logitech_receiver/i18n.py:47
msgid   "error"
msgstr  "錯誤"

#: lib/logitech_receiver/i18n.py:48
msgid   "standard"
msgstr  "標準"

#: lib/logitech_receiver/i18n.py:49
msgid   "fast"
msgstr  "快速"

#: lib/logitech_receiver/i18n.py:50
msgid   "slow"
msgstr  "慢"

#: lib/logitech_receiver/i18n.py:53
msgid   "device timeout"
msgstr  "裝置逾時"

#: lib/logitech_receiver/i18n.py:54
msgid   "device not supported"
msgstr  "不支援的裝置"

#: lib/logitech_receiver/i18n.py:55
msgid   "too many devices"
msgstr  "裝置數量太多"

#: lib/logitech_receiver/i18n.py:56
msgid   "sequence timeout"
msgstr  "序列超時"

#: lib/logitech_receiver/i18n.py:59 lib/solaar/ui/window.py:572
msgid   "Firmware"
msgstr  "韌體"

#: lib/logitech_receiver/i18n.py:60
msgid   "Bootloader"
msgstr  "啟動器"

#: lib/logitech_receiver/i18n.py:61
msgid   "Hardware"
msgstr  "硬體"

#: lib/logitech_receiver/i18n.py:62
msgid   "Other"
msgstr  "其他"

#: lib/logitech_receiver/i18n.py:65
msgid   "Left Button"
msgstr  "左鍵"

#: lib/logitech_receiver/i18n.py:66
msgid   "Right Button"
msgstr  "右鍵"

#: lib/logitech_receiver/i18n.py:67
msgid   "Middle Button"
msgstr  "中鍵"

#: lib/logitech_receiver/i18n.py:68
msgid   "Back Button"
msgstr  "返回鍵"

#: lib/logitech_receiver/i18n.py:69
msgid   "Forward Button"
msgstr  "前進鍵"

#: lib/logitech_receiver/i18n.py:70
msgid   "Mouse Gesture Button"
msgstr  "滑鼠手勢鍵"

#: lib/logitech_receiver/i18n.py:71
msgid   "Smart Shift"
msgstr  "智慧切換"

#: lib/logitech_receiver/i18n.py:72
msgid   "DPI Switch"
msgstr  "DPI 切換"

#: lib/logitech_receiver/i18n.py:73
msgid   "Left Tilt"
msgstr  "向左傾斜"

#: lib/logitech_receiver/i18n.py:74
msgid   "Right Tilt"
msgstr  "向右傾斜"

#: lib/logitech_receiver/i18n.py:75
msgid   "Left Click"
msgstr  "左鍵"

#: lib/logitech_receiver/i18n.py:76
msgid   "Right Click"
msgstr  "右鍵"

#: lib/logitech_receiver/i18n.py:77
msgid   "Mouse Middle Button"
msgstr  "滑鼠中鍵"

#: lib/logitech_receiver/i18n.py:78
msgid   "Mouse Back Button"
msgstr  "滑鼠返回鍵"

#: lib/logitech_receiver/i18n.py:79
msgid   "Mouse Forward Button"
msgstr  "滑鼠前進鍵"

#: lib/logitech_receiver/i18n.py:80
msgid   "Gesture Button Navigation"
msgstr  "手勢按鈕導航"

#: lib/logitech_receiver/i18n.py:81
msgid   "Mouse Scroll Left Button"
msgstr  "滑鼠滾輪向左按鈕"

#: lib/logitech_receiver/i18n.py:82
msgid   "Mouse Scroll Right Button"
msgstr  "滑鼠滾輪向右按鈕"

#: lib/logitech_receiver/i18n.py:85
msgid   "pressed"
msgstr  "按下"

#: lib/logitech_receiver/i18n.py:86
msgid   "released"
msgstr  "放開"

#: lib/logitech_receiver/notifications.py:75
#: lib/logitech_receiver/notifications.py:126
msgid   "pairing lock is closed"
msgstr  "配對鎖已關閉"

#: lib/logitech_receiver/notifications.py:75
#: lib/logitech_receiver/notifications.py:126
msgid   "pairing lock is open"
msgstr  "配對鎖開啟"

#: lib/logitech_receiver/notifications.py:92
msgid   "discovery lock is closed"
msgstr  "發現鎖已關閉"

#: lib/logitech_receiver/notifications.py:92
msgid   "discovery lock is open"
msgstr  "發現鎖已開啟"

#: lib/logitech_receiver/notifications.py:224 lib/solaar/ui/notify.py:122
msgid   "connected"
msgstr  "已連線"

#: lib/logitech_receiver/notifications.py:224
msgid   "disconnected"
msgstr  "斷線"

#: lib/logitech_receiver/notifications.py:262 lib/solaar/ui/notify.py:120
msgid   "unpaired"
msgstr  "未配對"

#: lib/logitech_receiver/notifications.py:304
msgid   "powered on"
msgstr  "已啟動"

#: lib/logitech_receiver/settings.py:750
msgid   "register"
msgstr  "註冊"

#: lib/logitech_receiver/settings.py:764 lib/logitech_receiver/settings.py:791
msgid   "feature"
msgstr  "功能"

#: lib/logitech_receiver/settings_templates.py:139
msgid   "Swap Fx function"
msgstr  "互換 Fx 鍵功能"

#: lib/logitech_receiver/settings_templates.py:140
msgid   "When set, the F1..F12 keys will activate their special function,\n"
        "and you must hold the FN key to activate their standard function."
msgstr  "若開啟，F1 到 F12 鍵將啟用特殊功能，\n"
        "使用標準功能請同時按住 FN 鍵。"

#: lib/logitech_receiver/settings_templates.py:142
msgid   "When unset, the F1..F12 keys will activate their standard function,\n"
        "and you must hold the FN key to activate their special function."
msgstr  "若關閉，F1 到 F12 鍵將啟用標準功能，\n"
        "使用特殊功能請同時按住 FN 鍵。"

#: lib/logitech_receiver/settings_templates.py:149
msgid   "Hand Detection"
msgstr  "手掌識別"

#: lib/logitech_receiver/settings_templates.py:150
msgid   "Turn on illumination when the hands hover over the keyboard."
msgstr  "手掌置於鍵盤上方時開啟照明。"

#: lib/logitech_receiver/settings_templates.py:157
msgid   "Scroll Wheel Smooth Scrolling"
msgstr  "滾輪平滑捲動"

#: lib/logitech_receiver/settings_templates.py:158
#: lib/logitech_receiver/settings_templates.py:239
#: lib/logitech_receiver/settings_templates.py:267
msgid   "High-sensitivity mode for vertical scroll with the wheel."
msgstr  "滾輪高解析度滾動模式。"

#: lib/logitech_receiver/settings_templates.py:165
msgid   "Side Scrolling"
msgstr  "側邊滾動"

#: lib/logitech_receiver/settings_templates.py:167
msgid   "When disabled, pushing the wheel sideways sends custom button "
        "events\n"
        "instead of the standard side-scrolling events."
msgstr  "若停用，按下滾輪側邊將傳送自定義按鈕事件\n"
        "而不是標準側邊滾動事件。"

#: lib/logitech_receiver/settings_templates.py:177
msgid   "Sensitivity (DPI - older mice)"
msgstr  "靈敏度（DPI - 較舊的滑鼠）"

#: lib/logitech_receiver/settings_templates.py:178
#: lib/logitech_receiver/settings_templates.py:712
msgid   "Mouse movement sensitivity"
msgstr  "滑鼠移動靈敏度"

#: lib/logitech_receiver/settings_templates.py:208
#: lib/logitech_receiver/settings_templates.py:218
#: lib/logitech_receiver/settings_templates.py:225
msgid   "Backlight"
msgstr  "背光"

#: lib/logitech_receiver/settings_templates.py:209
#: lib/logitech_receiver/settings_templates.py:226
msgid   "Set illumination time for keyboard."
msgstr  "設定鍵盤的照明時間。"

#: lib/logitech_receiver/settings_templates.py:219
msgid   "Turn illumination on or off on keyboard."
msgstr  "開啟或關閉鍵盤照明。"

#: lib/logitech_receiver/settings_templates.py:237
msgid   "Scroll Wheel High Resolution"
msgstr  "滾輪高解析度"

#: lib/logitech_receiver/settings_templates.py:240
#: lib/logitech_receiver/settings_templates.py:268
msgid   "Set to ignore if scrolling is abnormally fast or slow"
msgstr  "如果滾動速度異常快或慢，設定為忽略"

#: lib/logitech_receiver/settings_templates.py:247
#: lib/logitech_receiver/settings_templates.py:277
msgid   "Scroll Wheel Diversion"
msgstr  "滾輪轉向"

#: lib/logitech_receiver/settings_templates.py:249
msgid   "Make scroll wheel send LOWRES_WHEEL HID++ notifications (which "
        "trigger Solaar rules but are otherwise ignored)."
msgstr  "使滾輪發送 LOWRES_WHEEL HID++ 通知（觸發 Solaar 規則，但其他情況下將"
        "被忽略）。"

#: lib/logitech_receiver/settings_templates.py:256
msgid   "Scroll Wheel Direction"
msgstr  "滾輪方向"

#: lib/logitech_receiver/settings_templates.py:257
msgid   "Invert direction for vertical scroll with wheel."
msgstr  "反轉滾輪的垂直滾動方向。"

#: lib/logitech_receiver/settings_templates.py:265
msgid   "Scroll Wheel Resolution"
msgstr  "滾輪解析度"

#: lib/logitech_receiver/settings_templates.py:279
msgid   "Make scroll wheel send HIRES_WHEEL HID++ notifications (which "
        "trigger Solaar rules but are otherwise ignored)."
msgstr  "使滾輪發送 HIRES_WHEEL HID++ 通知（觸發 Solaar 規則，但其他情況下將被"
        "忽略）。"

#: lib/logitech_receiver/settings_templates.py:288
msgid   "Sensitivity (Pointer Speed)"
msgstr  "靈敏度（指標速度）"

#: lib/logitech_receiver/settings_templates.py:289
msgid   "Speed multiplier for mouse (256 is normal multiplier)."
msgstr  "滑鼠速度乘數（256 為正常乘數）。"

#: lib/logitech_receiver/settings_templates.py:299
msgid   "Thumb Wheel Diversion"
msgstr  "拇指滾輪轉向"

#: lib/logitech_receiver/settings_templates.py:301
msgid   "Make thumb wheel send THUMB_WHEEL HID++ notifications (which trigger "
        "Solaar rules but are otherwise ignored)."
msgstr  "使拇指滾輪發送 THUMB_WHEEL HID++ 通知（觸發 Solaar 規則，但其他情況下"
        "將被忽略）。"

#: lib/logitech_receiver/settings_templates.py:310
msgid   "Thumb Wheel Direction"
msgstr  "拇指滾輪方向"

#: lib/logitech_receiver/settings_templates.py:311
msgid   "Invert thumb wheel scroll direction."
msgstr  "反轉拇指滾輪滾動方向。"

#: lib/logitech_receiver/settings_templates.py:319
msgid   "Onboard Profiles"
msgstr  "內建設定檔"

#: lib/logitech_receiver/settings_templates.py:320
msgid   "Enable onboard profiles, which often control report rate and "
        "keyboard lighting"
msgstr  "啟用內建設定檔，通常用於控制報告速率和鍵盤亮度"

#: lib/logitech_receiver/settings_templates.py:330
msgid   "Polling Rate (ms)"
msgstr  "輪詢速率（毫秒）"

#: lib/logitech_receiver/settings_templates.py:332
msgid   "Frequency of device polling, in milliseconds"
msgstr  "裝置輪詢的頻率，以毫秒為單位"

#: lib/logitech_receiver/settings_templates.py:333
#: lib/logitech_receiver/settings_templates.py:1046
#: lib/logitech_receiver/settings_templates.py:1076
msgid   "May need Onboard Profiles set to Disable to be effective."
msgstr  "可能需要將內建設定檔設定為停用才能生效。"

#: lib/logitech_receiver/settings_templates.py:365
msgid   "Divert crown events"
msgstr  "轉移多功能轉鈕事件"

#: lib/logitech_receiver/settings_templates.py:366
msgid   "Make crown send CROWN HID++ notifications (which trigger Solaar "
        "rules but are otherwise ignored)."
msgstr  "使多功能轉鈕發送 CROWN HID++ 通知（觸發 Solaar 規則，但其他情況下將被"
        "忽略）。"

#: lib/logitech_receiver/settings_templates.py:374
msgid   "Crown smooth scroll"
msgstr  "Crown 平滑滾動"

#: lib/logitech_receiver/settings_templates.py:375
msgid   "Set crown smooth scroll"
msgstr  "設定 Crown 平滑滾動"

#: lib/logitech_receiver/settings_templates.py:383
msgid   "Divert G Keys"
msgstr  "轉換 G 鍵"

#: lib/logitech_receiver/settings_templates.py:385
msgid   "Make G keys send GKEY HID++ notifications (which trigger Solaar "
        "rules but are otherwise ignored)."
msgstr  "讓 G 鍵發送 GKEY HID++ 通知（將觸發 Solaar 規則，但其他情況下會被忽"
        "略）。"

#: lib/logitech_receiver/settings_templates.py:386
msgid   "May also make M keys and MR key send HID++ notifications"
msgstr  "也可能讓 M 鍵和 MR 鍵發送 HID++ 通知"

#: lib/logitech_receiver/settings_templates.py:402
msgid   "Scroll Wheel Ratcheted"
msgstr  "滾輪棘輪"

#: lib/logitech_receiver/settings_templates.py:403
msgid   "Switch the mouse wheel between speed-controlled ratcheting and "
        "always freespin."
msgstr  "在速度控制的滾輪棘輪和始終自由滾動之間切換滑鼠滾輪。"

#: lib/logitech_receiver/settings_templates.py:405
msgid   "Freespinning"
msgstr  "自由滾動"

#: lib/logitech_receiver/settings_templates.py:405
msgid   "Ratcheted"
msgstr  "棘輪式"

#: lib/logitech_receiver/settings_templates.py:412
msgid   "Scroll Wheel Ratchet Speed"
msgstr  "滾輪棘輪速度"

#: lib/logitech_receiver/settings_templates.py:414
msgid   "Use the mouse wheel speed to switch between ratcheted and "
        "freespinning.\n"
        "The mouse wheel is always ratcheted at 50."
msgstr  "使用滑鼠滾輪速度在滾輪棘輪和自由滾動之間切換。\n"
        "滾輪在 50 時始終處於棘輪狀態。"

#: lib/logitech_receiver/settings_templates.py:463
msgid   "Key/Button Actions"
msgstr  "鍵/按鈕動作"

#: lib/logitech_receiver/settings_templates.py:465
msgid   "Change the action for the key or button."
msgstr  "更改鍵或按鈕的動作。"

#: lib/logitech_receiver/settings_templates.py:465
msgid   "Overridden by diversion."
msgstr  "由轉換覆蓋。"

#: lib/logitech_receiver/settings_templates.py:466
msgid   "Changing important actions (such as for the left mouse button) can "
        "result in an unusable system."
msgstr  "更改重要動作（例如左鍵）可能導致系統無法使用。"

#: lib/logitech_receiver/settings_templates.py:639
msgid   "Key/Button Diversion"
msgstr  "鍵/按鈕轉換"

#: lib/logitech_receiver/settings_templates.py:640
msgid   "Make the key or button send HID++ notifications (Diverted) or "
        "initiate Mouse Gestures or Sliding DPI"
msgstr  "讓鍵或按鈕發送 HID++ 通知（已轉換）或啟動滑鼠手勢或滑動 DPI"

#: lib/logitech_receiver/settings_templates.py:643
#: lib/logitech_receiver/settings_templates.py:644
#: lib/logitech_receiver/settings_templates.py:645
msgid   "Diverted"
msgstr  "已轉換"

#: lib/logitech_receiver/settings_templates.py:643
#: lib/logitech_receiver/settings_templates.py:644
msgid   "Mouse Gestures"
msgstr  "滑鼠手勢"

#: lib/logitech_receiver/settings_templates.py:643
#: lib/logitech_receiver/settings_templates.py:644
#: lib/logitech_receiver/settings_templates.py:645
msgid   "Regular"
msgstr  "常規"

#: lib/logitech_receiver/settings_templates.py:643
msgid   "Sliding DPI"
msgstr  "滑動 DPI"

#: lib/logitech_receiver/settings_templates.py:711
msgid   "Sensitivity (DPI)"
msgstr  "靈敏度 (DPI)"

#: lib/logitech_receiver/settings_templates.py:752
msgid   "Sensitivity Switching"
msgstr  "靈敏度切換"

#: lib/logitech_receiver/settings_templates.py:754
msgid   "Switch the current sensitivity and the remembered sensitivity when "
        "the key or button is pressed.\n"
        "If there is no remembered sensitivity, just remember the current "
        "sensitivity"
msgstr  "在按下鍵或按鈕時切換目前靈敏度和已記憶的靈敏度。\n"
        "如果沒有已記憶的靈敏度，只需記住目前的靈敏度"

#: lib/logitech_receiver/settings_templates.py:758
msgid   "Off"
msgstr  "關"

#: lib/logitech_receiver/settings_templates.py:791
msgid   "Disable keys"
msgstr  "停用鍵"

#: lib/logitech_receiver/settings_templates.py:792
msgid   "Disable specific keyboard keys."
msgstr  "停用特定鍵盤按鍵。"

#: lib/logitech_receiver/settings_templates.py:795
#, python-format
msgid   "Disables the %s key."
msgstr  "停用 %s 鍵。"

#: lib/logitech_receiver/settings_templates.py:809
#: lib/logitech_receiver/settings_templates.py:860
msgid   "Set OS"
msgstr  "設定作業系統"

#: lib/logitech_receiver/settings_templates.py:810
#: lib/logitech_receiver/settings_templates.py:861
msgid   "Change keys to match OS."
msgstr  "更改按鍵以符合作業系統。"

#: lib/logitech_receiver/settings_templates.py:873
msgid   "Change Host"
msgstr  "更改主機號碼"

#: lib/logitech_receiver/settings_templates.py:874
msgid   "Switch connection to a different host"
msgstr  "切換到其他主機"

#: lib/logitech_receiver/settings_templates.py:900
msgid   "Performs a left click."
msgstr  "執行左鍵點選。"

#: lib/logitech_receiver/settings_templates.py:900
msgid   "Single tap"
msgstr  "點選"

#: lib/logitech_receiver/settings_templates.py:901
msgid   "Performs a right click."
msgstr  "執行右鍵點選。"

#: lib/logitech_receiver/settings_templates.py:901
msgid   "Single tap with two fingers"
msgstr  "用兩根手指點選"

#: lib/logitech_receiver/settings_templates.py:902
msgid   "Single tap with three fingers"
msgstr  "用三根手指點選"

#: lib/logitech_receiver/settings_templates.py:906
msgid   "Double tap"
msgstr  "點兩下"

#: lib/logitech_receiver/settings_templates.py:906
msgid   "Performs a double click."
msgstr  "執行點兩下。"

#: lib/logitech_receiver/settings_templates.py:907
msgid   "Double tap with two fingers"
msgstr  "用兩根手指點兩下"

#: lib/logitech_receiver/settings_templates.py:908
msgid   "Double tap with three fingers"
msgstr  "用三根手指點兩下"

#: lib/logitech_receiver/settings_templates.py:911
msgid   "Drags items by dragging the finger after double tapping."
msgstr  "點兩下後拖動手指來拖動物件。"

#: lib/logitech_receiver/settings_templates.py:911
msgid   "Tap and drag"
msgstr  "點選並拖曳"

#: lib/logitech_receiver/settings_templates.py:913
msgid   "Drags items by dragging the fingers after double tapping."
msgstr  "點兩下後拖動手指來拖動物件。"

#: lib/logitech_receiver/settings_templates.py:913
msgid   "Tap and drag with two fingers"
msgstr  "用兩根手指點兩下並拖曳"

#: lib/logitech_receiver/settings_templates.py:914
msgid   "Tap and drag with three fingers"
msgstr  "用三根手指點選並拖曳"

#: lib/logitech_receiver/settings_templates.py:917
msgid   "Disables tap and edge gestures (equivalent to pressing Fn+LeftClick)."
msgstr  "停用輕觸和邊緣手勢（相當於按 Fn+左鍵點選）。"

#: lib/logitech_receiver/settings_templates.py:917
msgid   "Suppress tap and edge gestures"
msgstr  "停用輕觸和邊緣手勢"

#: lib/logitech_receiver/settings_templates.py:918
msgid   "Scroll with one finger"
msgstr  "用一根手指滾動"

#: lib/logitech_receiver/settings_templates.py:918
#: lib/logitech_receiver/settings_templates.py:919
#: lib/logitech_receiver/settings_templates.py:922
msgid   "Scrolls."
msgstr  "滾動。"

#: lib/logitech_receiver/settings_templates.py:919
#: lib/logitech_receiver/settings_templates.py:922
msgid   "Scroll with two fingers"
msgstr  "用兩根手指滾動"

#: lib/logitech_receiver/settings_templates.py:920
msgid   "Scroll horizontally with two fingers"
msgstr  "用兩根手指水平滾動"

#: lib/logitech_receiver/settings_templates.py:920
msgid   "Scrolls horizontally."
msgstr  "水平滾動。"

#: lib/logitech_receiver/settings_templates.py:921
msgid   "Scroll vertically with two fingers"
msgstr  "用兩根手指垂直滾動"

#: lib/logitech_receiver/settings_templates.py:921
msgid   "Scrolls vertically."
msgstr  "垂直滾動。"

#: lib/logitech_receiver/settings_templates.py:923
msgid   "Inverts the scrolling direction."
msgstr  "反轉滾動方向。"

#: lib/logitech_receiver/settings_templates.py:923
msgid   "Natural scrolling"
msgstr  "自然滾動"

#: lib/logitech_receiver/settings_templates.py:924
msgid   "Enables the thumbwheel."
msgstr  "啟用拇指滾輪。"

#: lib/logitech_receiver/settings_templates.py:924
msgid   "Thumbwheel"
msgstr  "拇指滾輪"

#: lib/logitech_receiver/settings_templates.py:935
#: lib/logitech_receiver/settings_templates.py:939
msgid   "Swipe from the top edge"
msgstr  "從上緣滑動"

#: lib/logitech_receiver/settings_templates.py:936
msgid   "Swipe from the left edge"
msgstr  "從左緣滑動"

#: lib/logitech_receiver/settings_templates.py:937
msgid   "Swipe from the right edge"
msgstr  "從右緣滑動"

#: lib/logitech_receiver/settings_templates.py:938
msgid   "Swipe from the bottom edge"
msgstr  "從下緣滑動"

#: lib/logitech_receiver/settings_templates.py:940
msgid   "Swipe two fingers from the left edge"
msgstr  "從左緣滑動兩根手指"

#: lib/logitech_receiver/settings_templates.py:941
msgid   "Swipe two fingers from the right edge"
msgstr  "從右緣滑動兩根手指"

#: lib/logitech_receiver/settings_templates.py:942
msgid   "Swipe two fingers from the bottom edge"
msgstr  "從下緣滑動兩根手指"

#: lib/logitech_receiver/settings_templates.py:943
msgid   "Swipe two fingers from the top edge"
msgstr  "從上緣滑動兩根手指"

#: lib/logitech_receiver/settings_templates.py:944
#: lib/logitech_receiver/settings_templates.py:948
msgid   "Pinch to zoom out; spread to zoom in."
msgstr  "捏合以縮小；張開以放大。"

#: lib/logitech_receiver/settings_templates.py:944
msgid   "Zoom with two fingers."
msgstr  "用兩根手指縮放。"

#: lib/logitech_receiver/settings_templates.py:945
msgid   "Pinch to zoom out."
msgstr  "捏合以縮小。"

#: lib/logitech_receiver/settings_templates.py:946
msgid   "Spread to zoom in."
msgstr  "張開以放大。"

#: lib/logitech_receiver/settings_templates.py:947
msgid   "Zoom with three fingers."
msgstr  "用三根手指縮放。"

#: lib/logitech_receiver/settings_templates.py:948
msgid   "Zoom with two fingers"
msgstr  "用兩根手指縮放"

#: lib/logitech_receiver/settings_templates.py:966
msgid   "Pixel zone"
msgstr  "像素區域"

#: lib/logitech_receiver/settings_templates.py:967
msgid   "Ratio zone"
msgstr  "比例區域"

#: lib/logitech_receiver/settings_templates.py:968
msgid   "Scale factor"
msgstr  "縮放係數"

#: lib/logitech_receiver/settings_templates.py:968
msgid   "Sets the cursor speed."
msgstr  "設定游標速度。"

#: lib/logitech_receiver/settings_templates.py:972
msgid   "Left"
msgstr  "左"

#: lib/logitech_receiver/settings_templates.py:972
msgid   "Left-most coordinate."
msgstr  "最左邊的座標。"

#: lib/logitech_receiver/settings_templates.py:973
msgid   "Bottom"
msgstr  "底部"

#: lib/logitech_receiver/settings_templates.py:973
msgid   "Bottom coordinate."
msgstr  "底部座標。"

#: lib/logitech_receiver/settings_templates.py:974
msgid   "Width"
msgstr  "寬度"

#: lib/logitech_receiver/settings_templates.py:974
msgid   "Width."
msgstr  "寬度。"

#: lib/logitech_receiver/settings_templates.py:975
msgid   "Height"
msgstr  "高度"

#: lib/logitech_receiver/settings_templates.py:975
msgid   "Height."
msgstr  "高度。"

#: lib/logitech_receiver/settings_templates.py:976
msgid   "Cursor speed."
msgstr  "游標速度。"

#: lib/logitech_receiver/settings_templates.py:976
msgid   "Scale"
msgstr  "縮放"

#: lib/logitech_receiver/settings_templates.py:982
msgid   "Gestures"
msgstr  "手勢"

#: lib/logitech_receiver/settings_templates.py:983
msgid   "Tweak the mouse/touchpad behaviour."
msgstr  "調整滑鼠/觸控板行為。"

#: lib/logitech_receiver/settings_templates.py:1000
msgid   "Gestures Diversion"
msgstr  "手勢轉換"

#: lib/logitech_receiver/settings_templates.py:1001
msgid   "Divert mouse/touchpad gestures."
msgstr  "轉換滑鼠/觸控板手勢。"

#: lib/logitech_receiver/settings_templates.py:1018
msgid   "Gesture params"
msgstr  "手勢參數"

#: lib/logitech_receiver/settings_templates.py:1019
msgid   "Change numerical parameters of a mouse/touchpad."
msgstr  "更改滑鼠/觸控板的數值參數。"

#: lib/logitech_receiver/settings_templates.py:1044
msgid   "M-Key LEDs"
msgstr  "M 鍵 LED"

#: lib/logitech_receiver/settings_templates.py:1046
msgid   "Control the M-Key LEDs."
msgstr  "控制 M 鍵 LED。"

#: lib/logitech_receiver/settings_templates.py:1047
#: lib/logitech_receiver/settings_templates.py:1077
msgid   "May need G Keys diverted to be effective."
msgstr  "可能需要轉換 G 鍵才能生效。"

#: lib/logitech_receiver/settings_templates.py:1053
#, python-format
msgid   "Lights up the %s key."
msgstr  "點亮 %s 鍵。"

#: lib/logitech_receiver/settings_templates.py:1074
msgid   "MR-Key LED"
msgstr  "MR 鍵 LED"

#: lib/logitech_receiver/settings_templates.py:1076
msgid   "Control the MR-Key LED."
msgstr  "控制 MR 鍵 LED。"

#: lib/logitech_receiver/settings_templates.py:1095
msgid   "Persistent Key/Button Mapping"
msgstr  "持久按鍵/按鈕對應"

#: lib/logitech_receiver/settings_templates.py:1097
msgid   "Permanently change the mapping for the key or button."
msgstr  "永久更改按鍵或按鈕的對應。"

#: lib/logitech_receiver/settings_templates.py:1098
msgid   "Changing important keys or buttons (such as for the left mouse "
        "button) can result in an unusable system."
msgstr  "更改重要的按鍵或按鈕（例如左鍵）可能導致系統無法使用。"

#: lib/logitech_receiver/settings_templates.py:1157
msgid   "Sidetone"
msgstr  "側音"

#: lib/logitech_receiver/settings_templates.py:1158
msgid   "Set sidetone level."
msgstr  "設定側音等級。"

#: lib/logitech_receiver/settings_templates.py:1167
msgid   "Equalizer"
msgstr  "均衡器"

#: lib/logitech_receiver/settings_templates.py:1168
msgid   "Set equalizer levels."
msgstr  "設定均衡器等級。"

#: lib/logitech_receiver/settings_templates.py:1191
msgid   "Hz"
msgstr  "赫茲"

#: lib/logitech_receiver/settings_templates.py:1197
msgid   "Power Management"
msgstr  "電源管理"

#: lib/logitech_receiver/settings_templates.py:1198
msgid   "Power off in minutes (0 for never)."
msgstr  "幾分鐘後關機（0 表示永不）。"

#: lib/logitech_receiver/status.py:114
msgid   "No paired devices."
msgstr  "沒有已配對的裝置。"

#: lib/logitech_receiver/status.py:115 lib/solaar/ui/window.py:622
#, fuzzy, python-format
msgid   "%(count)s paired device."
msgid_plural    "%(count)s paired devices."
msgstr[0]       "%(count)s 個已配對裝置"

#: lib/logitech_receiver/status.py:170
#, python-format
msgid   "Battery: %(level)s"
msgstr  "電量：%(level)s "

#: lib/logitech_receiver/status.py:172
#, python-format
msgid   "Battery: %(percent)d%%"
msgstr  "電量：%(percent)d%%"

#: lib/logitech_receiver/status.py:184
#, python-format
msgid   "Lighting: %(level)s lux"
msgstr  "亮度： %(level)s lux"

#: lib/logitech_receiver/status.py:239
#, python-format
msgid   "Battery: %(level)s (%(status)s)"
msgstr  "電量: %(level)s (%(status)s)"

#: lib/logitech_receiver/status.py:241
#, python-format
msgid   "Battery: %(percent)d%% (%(status)s)"
msgstr  "電量: %(percent)d%% (%(status)s)"

#: lib/solaar/ui/__init__.py:52
msgid   "Permissions error"
msgstr  "權限錯誤"

#: lib/solaar/ui/__init__.py:54
#, python-format
msgid   "Found a Logitech receiver or device (%s), but did not have "
        "permission to open it."
msgstr  "找到了羅技接收器或裝置（%s），但沒有權限開啟。"

#: lib/solaar/ui/__init__.py:55
msgid   "If you've just installed Solaar, try disconnecting the receiver or "
        "device and then reconnecting it."
msgstr  "如果您剛剛安裝了 Solaar，請嘗試斷開接收器或裝置，然後重新連接。"

#: lib/solaar/ui/__init__.py:58
msgid   "Cannot connect to device error"
msgstr  "無法連接到裝置錯誤"

#: lib/solaar/ui/__init__.py:60
#, python-format
msgid   "Found a Logitech receiver or device at %s, but encountered an error "
        "connecting to it."
msgstr  "在 %s 找到了一個羅技接收器或裝置，但連接時遇到錯誤。"

#: lib/solaar/ui/__init__.py:61
msgid   "Try disconnecting the device and then reconnecting it or turning it "
        "off and then on."
msgstr  "嘗試斷開裝置然後重新連接，或者關閉裝置然後再開啟。"

#: lib/solaar/ui/__init__.py:64
msgid   "Unpairing failed"
msgstr  "取消配對失敗"

#: lib/solaar/ui/__init__.py:66
#, python-brace-format
msgid   "Failed to unpair %{device} from %{receiver}."
msgstr  "取消 %{device} 到 %{receiver} 的配對失敗。"

#: lib/solaar/ui/__init__.py:67
msgid   "The receiver returned an error, with no further details."
msgstr  "接收器出現錯誤，未提供詳細資訊。"

#: lib/solaar/ui/__init__.py:177
msgid   "Another Solaar process is already running so just expose its window"
msgstr  "其他的Solaar執行序已經運行了，所以顯示她的視窗。"

#: lib/solaar/ui/about.py:36
msgid   "Manages Logitech receivers,\n"
        "keyboards, mice, and tablets."
msgstr  "管理羅技接收器、鍵盤、滑鼠和平板。"

#: lib/solaar/ui/about.py:44
msgid   "Additional Programming"
msgstr  "額外程式化"

#: lib/solaar/ui/about.py:45
msgid   "GUI design"
msgstr  "介面設計"

#: lib/solaar/ui/about.py:47
msgid   "Testing"
msgstr  "軟體測試"

#: lib/solaar/ui/about.py:54
msgid   "Logitech documentation"
msgstr  "羅技文件"

#: lib/solaar/ui/action.py:85 lib/solaar/ui/action.py:89
#: lib/solaar/ui/window.py:197
msgid   "Unpair"
msgstr  "取消配對"

#: lib/solaar/ui/action.py:88 lib/solaar/ui/diversion_rules.py:150
msgid   "Cancel"
msgstr  "取消"

#: lib/solaar/ui/config_panel.py:212
msgid   "Complete - ENTER to change"
msgstr  "完成 - 按 ENTER 來修改"

#: lib/solaar/ui/config_panel.py:212
msgid   "Incomplete"
msgstr  "未完成"

#: lib/solaar/ui/config_panel.py:455 lib/solaar/ui/config_panel.py:507
#, python-format
msgid   "%d value"
msgid_plural    "%d values"
msgstr[0]       "%d 值"

#: lib/solaar/ui/config_panel.py:518
msgid   "Changes allowed"
msgstr  "允許更改"

#: lib/solaar/ui/config_panel.py:519
msgid   "No changes allowed"
msgstr  "不允許更改"

#: lib/solaar/ui/config_panel.py:520
msgid   "Ignore this setting"
msgstr  "忽略此設定"

#: lib/solaar/ui/config_panel.py:565
msgid   "Working"
msgstr  "工作中"

#: lib/solaar/ui/config_panel.py:568
msgid   "Read/write operation failed."
msgstr  "讀/寫操作失敗。"

#: lib/solaar/ui/diversion_rules.py:65
msgid   "Built-in rules"
msgstr  "內建規則"

#: lib/solaar/ui/diversion_rules.py:65
msgid   "User-defined rules"
msgstr  "使用者自定義規則"

#: lib/solaar/ui/diversion_rules.py:67 lib/solaar/ui/diversion_rules.py:1082
msgid   "Rule"
msgstr  "規則"

#: lib/solaar/ui/diversion_rules.py:68 lib/solaar/ui/diversion_rules.py:509
#: lib/solaar/ui/diversion_rules.py:635
msgid   "Sub-rule"
msgstr  "子規則"

#: lib/solaar/ui/diversion_rules.py:70
msgid   "[empty]"
msgstr  "[空]"

#: lib/solaar/ui/diversion_rules.py:94
msgid   "Solaar Rule Editor"
msgstr  "Solaar 規則編輯器"

#: lib/solaar/ui/diversion_rules.py:141
msgid   "Make changes permanent?"
msgstr  "使更改永久生效？"

#: lib/solaar/ui/diversion_rules.py:146
msgid   "Yes"
msgstr  "是"

#: lib/solaar/ui/diversion_rules.py:148
msgid   "No"
msgstr  "否"

#: lib/solaar/ui/diversion_rules.py:153
msgid   "If you choose No, changes will be lost when Solaar is closed."
msgstr  "如果您選擇否，當 Solaar 關閉時，更改將會遺失。"

#: lib/solaar/ui/diversion_rules.py:201
msgid   "Save changes"
msgstr  "儲存修改"

#: lib/solaar/ui/diversion_rules.py:206
msgid   "Discard changes"
msgstr  "不儲存修改"

#: lib/solaar/ui/diversion_rules.py:372
msgid   "Insert here"
msgstr  "在此插入"

#: lib/solaar/ui/diversion_rules.py:374
msgid   "Insert above"
msgstr  "在上方插入"

#: lib/solaar/ui/diversion_rules.py:376
msgid   "Insert below"
msgstr  "在下方插入"

#: lib/solaar/ui/diversion_rules.py:382
msgid   "Insert new rule here"
msgstr  "在此插入新規則"

#: lib/solaar/ui/diversion_rules.py:384
msgid   "Insert new rule above"
msgstr  "在上方插入新規則"

#: lib/solaar/ui/diversion_rules.py:386
msgid   "Insert new rule below"
msgstr  "在下方插入新規則"

#: lib/solaar/ui/diversion_rules.py:427
msgid   "Paste here"
msgstr  "在此貼上"

#: lib/solaar/ui/diversion_rules.py:429
msgid   "Paste above"
msgstr  "在上方貼上"

#: lib/solaar/ui/diversion_rules.py:431
msgid   "Paste below"
msgstr  "在下方貼上"

#: lib/solaar/ui/diversion_rules.py:437
msgid   "Paste rule here"
msgstr  "在此貼上規則"

#: lib/solaar/ui/diversion_rules.py:439
msgid   "Paste rule above"
msgstr  "在上方貼上規則"

#: lib/solaar/ui/diversion_rules.py:441
msgid   "Paste rule below"
msgstr  "在下方貼上規則"

#: lib/solaar/ui/diversion_rules.py:445
msgid   "Paste rule"
msgstr  "貼上規則"

#: lib/solaar/ui/diversion_rules.py:474
msgid   "Flatten"
msgstr  "平坦化"

#: lib/solaar/ui/diversion_rules.py:507
msgid   "Insert"
msgstr  "插入"

#: lib/solaar/ui/diversion_rules.py:510 lib/solaar/ui/diversion_rules.py:637
#: lib/solaar/ui/diversion_rules.py:1125
msgid   "Or"
msgstr  "或"

#: lib/solaar/ui/diversion_rules.py:511 lib/solaar/ui/diversion_rules.py:636
#: lib/solaar/ui/diversion_rules.py:1110
msgid   "And"
msgstr  "和"

#: lib/solaar/ui/diversion_rules.py:513
msgid   "Condition"
msgstr  "條件"

#: lib/solaar/ui/diversion_rules.py:515 lib/solaar/ui/diversion_rules.py:1291
msgid   "Feature"
msgstr  "功能"

#: lib/solaar/ui/diversion_rules.py:516 lib/solaar/ui/diversion_rules.py:1327
msgid   "Report"
msgstr  "報告"

#: lib/solaar/ui/diversion_rules.py:517 lib/solaar/ui/diversion_rules.py:1203
msgid   "Process"
msgstr  "處理"

#: lib/solaar/ui/diversion_rules.py:518
msgid   "Mouse process"
msgstr  "滑鼠處理"

#: lib/solaar/ui/diversion_rules.py:519 lib/solaar/ui/diversion_rules.py:1365
msgid   "Modifiers"
msgstr  "修飾鍵"

#: lib/solaar/ui/diversion_rules.py:520 lib/solaar/ui/diversion_rules.py:1418
msgid   "Key"
msgstr  "鍵"

#: lib/solaar/ui/diversion_rules.py:521 lib/solaar/ui/diversion_rules.py:1460
msgid   "KeyIsDown"
msgstr  "按鍵處於按下狀態"

#: lib/solaar/ui/diversion_rules.py:522 lib/solaar/ui/diversion_rules.py:2249
msgid   "Active"
msgstr  "使用中"

#: lib/solaar/ui/diversion_rules.py:523 lib/solaar/ui/diversion_rules.py:2207
#: lib/solaar/ui/diversion_rules.py:2259 lib/solaar/ui/diversion_rules.py:2281
msgid   "Device"
msgstr  "裝置"

#: lib/solaar/ui/diversion_rules.py:524 lib/solaar/ui/diversion_rules.py:2297
msgid   "Setting"
msgstr  "設定"

#: lib/solaar/ui/diversion_rules.py:525 lib/solaar/ui/diversion_rules.py:1476
#: lib/solaar/ui/diversion_rules.py:1525
msgid   "Test"
msgstr  "測試"

#: lib/solaar/ui/diversion_rules.py:526 lib/solaar/ui/diversion_rules.py:1642
msgid   "Test bytes"
msgstr  "測試位元組"

#: lib/solaar/ui/diversion_rules.py:527 lib/solaar/ui/diversion_rules.py:1735
msgid   "Mouse Gesture"
msgstr  "滑鼠手勢"

#: lib/solaar/ui/diversion_rules.py:531
msgid   "Action"
msgstr  "動作"

#: lib/solaar/ui/diversion_rules.py:533 lib/solaar/ui/diversion_rules.py:1844
msgid   "Key press"
msgstr  "按鍵按下"

#: lib/solaar/ui/diversion_rules.py:534 lib/solaar/ui/diversion_rules.py:1897
msgid   "Mouse scroll"
msgstr  "滑鼠滾動"

#: lib/solaar/ui/diversion_rules.py:535 lib/solaar/ui/diversion_rules.py:1948
msgid   "Mouse click"
msgstr  "滑鼠點選"

#: lib/solaar/ui/diversion_rules.py:536
msgid   "Set"
msgstr  "設定"

#: lib/solaar/ui/diversion_rules.py:537 lib/solaar/ui/diversion_rules.py:2019
msgid   "Execute"
msgstr  "執行"

#: lib/solaar/ui/diversion_rules.py:538 lib/solaar/ui/diversion_rules.py:1157
msgid   "Later"
msgstr  "稍後"

#: lib/solaar/ui/diversion_rules.py:567
msgid   "Insert new rule"
msgstr  "插入新規則"

#: lib/solaar/ui/diversion_rules.py:587 lib/solaar/ui/diversion_rules.py:1685
#: lib/solaar/ui/diversion_rules.py:1789 lib/solaar/ui/diversion_rules.py:1978
msgid   "Delete"
msgstr  "刪除"

#: lib/solaar/ui/diversion_rules.py:609
msgid   "Negate"
msgstr  "否"

#: lib/solaar/ui/diversion_rules.py:633
msgid   "Wrap with"
msgstr  "包在一起"

#: lib/solaar/ui/diversion_rules.py:655
msgid   "Cut"
msgstr  "剪下"

#: lib/solaar/ui/diversion_rules.py:670
msgid   "Paste"
msgstr  "貼上"

#: lib/solaar/ui/diversion_rules.py:682
msgid   "Copy"
msgstr  "複製"

#: lib/solaar/ui/diversion_rules.py:1062
msgid   "This editor does not support the selected rule component yet."
msgstr  "此編輯器尚不支援所選規則元件。"

#: lib/solaar/ui/diversion_rules.py:1137
msgid   "Number of seconds to delay."
msgstr  "延遲的秒數。"

#: lib/solaar/ui/diversion_rules.py:1176
msgid   "Not"
msgstr  "非"

#: lib/solaar/ui/diversion_rules.py:1186
msgid   "X11 active process. For use in X11 only."
msgstr  "X11 活躍程序。僅適用於 X11。"

#: lib/solaar/ui/diversion_rules.py:1217
msgid   "X11 mouse process. For use in X11 only."
msgstr  "X11 滑鼠程序。僅適用於 X11。"

#: lib/solaar/ui/diversion_rules.py:1234
msgid   "MouseProcess"
msgstr  "滑鼠程序"

#: lib/solaar/ui/diversion_rules.py:1259
msgid   "Feature name of notification triggering rule processing."
msgstr  "觸發規則處理的通知功能名稱。"

#: lib/solaar/ui/diversion_rules.py:1307
msgid   "Report number of notification triggering rule processing."
msgstr  "報告觸發規則處理的通知數量。"

#: lib/solaar/ui/diversion_rules.py:1341
msgid   "Active keyboard modifiers. Not always available in Wayland."
msgstr  "活躍的鍵盤修飾鍵。在 Wayland 中並非總是可用。"

#: lib/solaar/ui/diversion_rules.py:1382
msgid   "Diverted key or button depressed or released.\n"
        "Use the Key/Button Diversion and Divert G Keys settings to divert "
        "keys and buttons."
msgstr  "轉向鍵或按鈕被按下或放開。\n"
        "使用按鍵 / 按鈕轉向和轉向 G 鍵設定來轉向鍵和按鈕。"

#: lib/solaar/ui/diversion_rules.py:1391
msgid   "Key down"
msgstr  "按鍵按下"

#: lib/solaar/ui/diversion_rules.py:1394
msgid   "Key up"
msgstr  "按鍵鬆開"

#: lib/solaar/ui/diversion_rules.py:1435
msgid   "Diverted key or button is currently down.\n"
        "Use the Key/Button Diversion and Divert G Keys settings to divert "
        "keys and buttons."
msgstr  "轉向鍵或按鈕目前處於按下狀態。\n"
        "使用鍵 / 按鈕轉向和轉向 G 鍵設定來轉向鍵和按鈕。"

#: lib/solaar/ui/diversion_rules.py:1474
msgid   "Test condition on notification triggering rule processing."
msgstr  "在通知觸發規則處理上測試條件。"

#: lib/solaar/ui/diversion_rules.py:1478
msgid   "Parameter"
msgstr  "參數"

#: lib/solaar/ui/diversion_rules.py:1541
msgid   "begin (inclusive)"
msgstr  "開始（包含）"

#: lib/solaar/ui/diversion_rules.py:1542
msgid   "end (exclusive)"
msgstr  "結束（不包含）"

#: lib/solaar/ui/diversion_rules.py:1551
msgid   "range"
msgstr  "範圍"

#: lib/solaar/ui/diversion_rules.py:1553
msgid   "minimum"
msgstr  "最小值"

#: lib/solaar/ui/diversion_rules.py:1554
msgid   "maximum"
msgstr  "最大值"

#: lib/solaar/ui/diversion_rules.py:1556
#, python-format
msgid   "bytes %(0)d to %(1)d, ranging from %(2)d to %(3)d"
msgstr  "位元組 %(0)d 到 %(1)d，範圍從 %(2)d 到 %(3)d"

#: lib/solaar/ui/diversion_rules.py:1561
msgid   "mask"
msgstr  "遮罩"

#: lib/solaar/ui/diversion_rules.py:1562
#, python-format
msgid   "bytes %(0)d to %(1)d, mask %(2)d"
msgstr  "位元組 %(0)d 到 %(1)d，遮罩 %(2)d"

#: lib/solaar/ui/diversion_rules.py:1572
msgid   "Bit or range test on bytes in notification message triggering rule "
        "processing."
msgstr  "在通知訊息觸發規則處理中對位元組進行位元或範圍測試。"

#: lib/solaar/ui/diversion_rules.py:1582
msgid   "type"
msgstr  "類型"

#: lib/solaar/ui/diversion_rules.py:1665
msgid   "Mouse gesture with optional initiating button followed by zero or "
        "more mouse movements."
msgstr  "滑鼠手勢，可選擇帶有初始按鈕，後跟零個或多個滑鼠移動。"

#: lib/solaar/ui/diversion_rules.py:1670
msgid   "Add movement"
msgstr  "新增移動"

#: lib/solaar/ui/diversion_rules.py:1763
msgid   "Simulate a chorded key click or depress or release.\n"
        "On Wayland requires write access to /dev/uinput."
msgstr  "模擬成組按鍵點選或按下或放開。\n"
        "在 Wayland 上需要對 /dev/uinput 進行寫入。"

#: lib/solaar/ui/diversion_rules.py:1768
msgid   "Add key"
msgstr  "新增按鍵"

#: lib/solaar/ui/diversion_rules.py:1771
msgid   "Click"
msgstr  "點選"

#: lib/solaar/ui/diversion_rules.py:1774
msgid   "Depress"
msgstr  "按下"

#: lib/solaar/ui/diversion_rules.py:1777
msgid   "Release"
msgstr  "放開"

#: lib/solaar/ui/diversion_rules.py:1861
msgid   "Simulate a mouse scroll.\n"
        "On Wayland requires write access to /dev/uinput."
msgstr  "模擬滑鼠滾動。\n"
        "在 Wayland 上需要對 /dev/uinput 進行寫入。"

#: lib/solaar/ui/diversion_rules.py:1917
msgid   "Simulate a mouse click.\n"
        "On Wayland requires write access to /dev/uinput."
msgstr  "模擬滑鼠點選。\n"
        "在 Wayland 上需要對 /dev/uinput 進行寫入。"

#: lib/solaar/ui/diversion_rules.py:1920
msgid   "Button"
msgstr  "按鈕"

#: lib/solaar/ui/diversion_rules.py:1921
msgid   "Count"
msgstr  "計數"

#: lib/solaar/ui/diversion_rules.py:1961
msgid   "Execute a command with arguments."
msgstr  "執行帶有參數的命令。"

#: lib/solaar/ui/diversion_rules.py:1964
msgid   "Add argument"
msgstr  "新增參數"

#: lib/solaar/ui/diversion_rules.py:2039
msgid   "Toggle"
msgstr  "切換"

#: lib/solaar/ui/diversion_rules.py:2039
msgid   "True"
msgstr  "真"

#: lib/solaar/ui/diversion_rules.py:2040
msgid   "False"
msgstr  "假"

#: lib/solaar/ui/diversion_rules.py:2054
msgid   "Unsupported setting"
msgstr  "不支援的設定"

#: lib/solaar/ui/diversion_rules.py:2212 lib/solaar/ui/diversion_rules.py:2231
#: lib/solaar/ui/diversion_rules.py:2286 lib/solaar/ui/diversion_rules.py:2528
#: lib/solaar/ui/diversion_rules.py:2546
msgid   "Originating device"
msgstr  "發起裝置"

#: lib/solaar/ui/diversion_rules.py:2245
msgid   "Device is active and its settings can be changed."
msgstr  "裝置處於活躍狀態，其設定可以更改。"

#: lib/solaar/ui/diversion_rules.py:2255
msgid   "Device originated the current notification."
msgstr  "裝置發起了當前通知。"

#: lib/solaar/ui/diversion_rules.py:2305
msgid   "Value"
msgstr  "數值"

#: lib/solaar/ui/diversion_rules.py:2313
msgid   "Item"
msgstr  "項目"

#: lib/solaar/ui/diversion_rules.py:2588
msgid   "Change setting on device"
msgstr  "更改裝置上的設定"

#: lib/solaar/ui/diversion_rules.py:2605
msgid   "Setting on device"
msgstr  "裝置上的設定"

#: lib/solaar/ui/notify.py:124 lib/solaar/ui/tray.py:320
#: lib/solaar/ui/tray.py:325 lib/solaar/ui/window.py:739
msgid   "offline"
msgstr  "離線"

#: lib/solaar/ui/pair_window.py:122 lib/solaar/ui/pair_window.py:256
#: lib/solaar/ui/pair_window.py:288
#, python-format
msgid   "%(receiver_name)s: pair new device"
msgstr  "%(receiver_name)s：配對新的裝置"

#: lib/solaar/ui/pair_window.py:123
#, python-format
msgid   "Enter passcode on %(name)s."
msgstr  "在 %(name)s 上輸入密碼。"

#: lib/solaar/ui/pair_window.py:126
#, python-format
msgid   "Type %(passcode)s and then press the enter key."
msgstr  "輸入 %(passcode)s，然後按 Enter 鍵。"

#: lib/solaar/ui/pair_window.py:129
msgid   "left"
msgstr  "左"

#: lib/solaar/ui/pair_window.py:129
msgid   "right"
msgstr  "右"

#: lib/solaar/ui/pair_window.py:131
#, python-format
msgid   "Press %(code)s\n"
        "and then press left and right buttons simultaneously."
msgstr  "按下 %(code)s\n"
        "然後同時按下左鍵和右鍵。"

#: lib/solaar/ui/pair_window.py:188
msgid   "Pairing failed"
msgstr  "配對失敗"

#: lib/solaar/ui/pair_window.py:190
msgid   "Make sure your device is within range, and has a decent battery "
        "charge."
msgstr  "請確認您的裝置已在範圍內，並保證其電量充足。"

#: lib/solaar/ui/pair_window.py:192
msgid   "A new device was detected, but it is not compatible with this "
        "receiver."
msgstr  "偵測到 1 個新裝置，但與此接收器不相容。"

#: lib/solaar/ui/pair_window.py:194
msgid   "More paired devices than receiver can support."
msgstr  "配對的裝置數量超過接收器的支援範圍。"

#: lib/solaar/ui/pair_window.py:196
msgid   "No further details are available about the error."
msgstr  "無此錯誤的詳細資訊。"

#: lib/solaar/ui/pair_window.py:210
msgid   "Found a new device:"
msgstr  "發現一個新裝置："

#: lib/solaar/ui/pair_window.py:235
msgid   "The wireless link is not encrypted"
msgstr  "無線連線未加密"

#: lib/solaar/ui/pair_window.py:264
msgid   "Unifying receivers are only compatible with Unifying devices."
msgstr  "Unifying 接收器只支援 Unifying 裝置。"

#: lib/solaar/ui/pair_window.py:266
msgid   "Bolt receivers are only compatible with Bolt devices."
msgstr  "Bolt 接收器只支援 Bolt 裝置。"

#: lib/solaar/ui/pair_window.py:268
msgid   "Other receivers are only compatible with a few devices."
msgstr  "其他接收器僅支援少數裝置。"

#: lib/solaar/ui/pair_window.py:270
msgid   "The device must not be paired with a nearby powered-on receiver."
msgstr  "裝置不應與附近已開啟的接收器配對。"

#: lib/solaar/ui/pair_window.py:274
msgid   "Press a pairing button or key until the pairing light flashes "
        "quickly."
msgstr  "按下配對按鈕或按鍵，直到配對燈快速閃爍。"

#: lib/solaar/ui/pair_window.py:276
msgid   "You may have to first turn the device off and on again."
msgstr  "您可能需要先關閉裝置，然後再開啟。"

#: lib/solaar/ui/pair_window.py:278
msgid   "Turn on the device you want to pair."
msgstr  "開啟您要配對的裝置。"

#: lib/solaar/ui/pair_window.py:280
msgid   "If the device is already turned on, turn it off and on again."
msgstr  "如果裝置已開啟，請將其關閉並重新開啟。"

#: lib/solaar/ui/pair_window.py:283
#, python-format
msgid   "\n"
        "\n"
        "This receiver has %d pairing remaining."
msgid_plural    "\n"
        "\n"
        "This receiver has %d pairings remaining."
msgstr[0]       "\n"
        "\n"
        "此接收器剩餘 %d 次配對。"

#: lib/solaar/ui/pair_window.py:286
msgid   "\n"
        "Cancelling at this point will not use up a pairing."
msgstr  "\n"
        "在此階段取消不會消耗配對次數。"

#: lib/solaar/ui/tray.py:58
msgid   "No Logitech device found"
msgstr  "沒有找到羅技的裝置"

#: lib/solaar/ui/tray.py:64 lib/solaar/ui/window.py:319
#, python-format
msgid   "About %s"
msgstr  "關於 %s"

#: lib/solaar/ui/tray.py:65 lib/solaar/ui/window.py:317
#, python-format
msgid   "Quit %s"
msgstr  "結束 %s"

#: lib/solaar/ui/tray.py:299 lib/solaar/ui/tray.py:307
msgid   "no receiver"
msgstr  "無接收器"

#: lib/solaar/ui/tray.py:323
msgid   "no status"
msgstr  "無狀態"

#: lib/solaar/ui/window.py:96
msgid   "Scanning"
msgstr  "掃描中"

#: lib/solaar/ui/window.py:129
msgid   "Battery"
msgstr  "電池"

#: lib/solaar/ui/window.py:132
msgid   "Wireless Link"
msgstr  "無線連線"

#: lib/solaar/ui/window.py:136
msgid   "Lighting"
msgstr  "亮度"

#: lib/solaar/ui/window.py:170
msgid   "Show Technical Details"
msgstr  "顯示細節"

#: lib/solaar/ui/window.py:186
msgid   "Pair new device"
msgstr  "配對新裝置"

#: lib/solaar/ui/window.py:205
msgid   "Select a device"
msgstr  "選擇 1 個裝置"

#: lib/solaar/ui/window.py:322
msgid   "Rule Editor"
msgstr  "規則編輯器"

#: lib/solaar/ui/window.py:533
msgid   "Path"
msgstr  "路徑"

#: lib/solaar/ui/window.py:536
msgid   "USB ID"
msgstr  "USB ID"

#: lib/solaar/ui/window.py:539 lib/solaar/ui/window.py:541
#: lib/solaar/ui/window.py:561 lib/solaar/ui/window.py:563
msgid   "Serial"
msgstr  "序號"

#: lib/solaar/ui/window.py:545
msgid   "Index"
msgstr  "索引"

#: lib/solaar/ui/window.py:547
msgid   "Wireless PID"
msgstr  "無線 PID"

#: lib/solaar/ui/window.py:549
msgid   "Product ID"
msgstr  "產品 ID"

#: lib/solaar/ui/window.py:551
msgid   "Protocol"
msgstr  "通訊協定"

#: lib/solaar/ui/window.py:551
msgid   "Unknown"
msgstr  "不明"

#: lib/solaar/ui/window.py:554
#, python-format
msgid   "%(rate)d ms (%(rate_hz)dHz)"
msgstr  "%(rate)d ms (%(rate_hz)dHz)"

#: lib/solaar/ui/window.py:554
msgid   "Polling rate"
msgstr  "查詢速率"

#: lib/solaar/ui/window.py:565
msgid   "Unit ID"
msgstr  "單位 ID"

#: lib/solaar/ui/window.py:576
msgid   "none"
msgstr  "無"

#: lib/solaar/ui/window.py:577
msgid   "Notifications"
msgstr  "通知"

#: lib/solaar/ui/window.py:621
msgid   "No device paired."
msgstr  "沒有已經配對的裝置"

#: lib/solaar/ui/window.py:628
#, fuzzy, python-format
msgid   "Up to %(max_count)s device can be paired to this receiver."
msgid_plural    "Up to %(max_count)s devices can be paired to this receiver."
msgstr[0]       "此接收器最多可以配對到 %(max_count)s 個裝置"

#: lib/solaar/ui/window.py:634
msgid   "Only one device can be paired to this receiver."
msgstr  "此接收器只能配對一個裝置"

#: lib/solaar/ui/window.py:638
#, python-format
msgid   "This receiver has %d pairing remaining."
msgid_plural    "This receiver has %d pairings remaining."
msgstr[0]       "此接收器剩餘 %d 次配對。"

#: lib/solaar/ui/window.py:692
msgid   "Battery Voltage"
msgstr  "電池電壓"

#: lib/solaar/ui/window.py:694
msgid   "Voltage reported by battery"
msgstr  "電池報告的電壓"

#: lib/solaar/ui/window.py:696
msgid   "Battery Level"
msgstr  "電池電量"

#: lib/solaar/ui/window.py:698
msgid   "Approximate level reported by battery"
msgstr  "電池報告的大約電量"

#: lib/solaar/ui/window.py:705 lib/solaar/ui/window.py:707
msgid   "next reported "
msgstr  "下一次報告的 "

#: lib/solaar/ui/window.py:708
msgid   " and next level to be reported."
msgstr  " 以及下一個將被報告的等級。"

#: lib/solaar/ui/window.py:713
msgid   "last known"
msgstr  "最後已知"

#: lib/solaar/ui/window.py:724
msgid   "encrypted"
msgstr  "已加密"

#: lib/solaar/ui/window.py:726
msgid   "The wireless link between this device and its receiver is encrypted."
msgstr  "裝置與接收器間的無線連線已加密。"

#: lib/solaar/ui/window.py:728
msgid   "not encrypted"
msgstr  "未加密"

#: lib/solaar/ui/window.py:732
msgid   "The wireless link between this device and its receiver is not "
        "encrypted.\n"
        "This is a security issue for pointing devices, and a major security "
        "issue for text-input devices."
msgstr  "此裝置與其接收器之間的無線連接未加密。\n"
        "這對指向性裝置是一個安全問題，對文字輸入裝置則是一個重大的安全問題。"

#: lib/solaar/ui/window.py:748
#, python-format
msgid   "%(light_level)d lux"
msgstr  "%(light_level)d lux"

#~ msgid        "top"
#~ msgstr       "上"

#~ msgid        "width"
#~ msgstr       "寬度"

#~ msgid        "height"
#~ msgstr       "高度"

#~ msgid        "About"
#~ msgstr       "關於"

#~ msgid        "No Logitech receiver found"
#~ msgstr       "未發現羅技接收器"

#~ msgid        "Quit"
#~ msgstr       "退出"

#~ msgid        "Smooth Scrolling"
#~ msgstr       "平滑滾動"

#~ msgid        "High Resolution Wheel Invert"
#~ msgstr       "高解析度滾輪反轉"

#~ msgid        "High-sensitivity wheel invert mode for vertical scroll."
#~ msgstr       "垂直捲動的高解析度反轉模式"

#~ msgid        "Wheel Resolution"
#~ msgstr       "滾輪解析度"

#~ msgid        "Automatically switch the mouse wheel between ratchet and "
#~      "freespin mode.\n"
#~      "The mouse wheel is always free at 0, and always locked at 50"
#~ msgstr       "自動切換滑鼠滾輪的段落模式"

#~ msgid        "The receiver was unplugged."
#~ msgstr       "接收器已移除。"

#~ msgid        "Shows status of devices connected\n"
#~      "through wireless Logitech receivers."
#~ msgstr       "顯示羅技接收器\n"
#~      "已連線的裝置狀態。"

#~ msgid        "The receiver only supports %d paired device(s)."
#~ msgstr       "此接收器僅支援 %d 個配對裝置。"

#~ msgid        "If the device is already turned on,\n"
#~      "turn if off and on again."
#~ msgstr       "若裝置的電源已經開啟，\n"
#~      "請先關閉再開啟。"

#~ msgid        "USB id"
#~ msgstr       "USB ID"

#~ msgid        "%(battery_percent)d%%"
#~ msgstr       "%(battery_percent)d%%"

#~ msgid        "%(battery_level)s"
#~ msgstr       "%(battery_level)s"

#~ msgid        "The wireless link between this device and its receiver is "
#~      "not encrypted.\n"
#~      "\n"
#~      "For pointing devices (mice, trackballs, trackpads), this is a minor "
#~      "security issue.\n"
#~      "\n"
#~      "It is, however, a major security issue for text-input devices "
#~      "(keyboards, numpads),\n"
#~      "because typed text can be sniffed inconspicuously by 3rd parties "
#~      "within range."
#~ msgstr       "裝置與接收器間的無線連線未加密。\n"
#~      "\n"
#~      "對定位裝置（如滑鼠、軌跡球、觸控板）來說這不是什麼問題。\n"
#~      "\n"
#~      "然而這對於內容輸入裝置（如鍵盤、數字鍵盤）卻是一個重大的安全問題，\n"
#~      "您輸入的內容有可能被第三方偷偷監聽到。"

#~ msgid        "Battery information unknown."
#~ msgstr       "電池狀態是未知的"

#~ msgid        "unknown"
#~ msgstr       "未知的"

#~ msgid        "Add action"
#~ msgstr       "增加動作"

#~ msgid        "Try removing the device and plugging it back in or turning "
#~      "it off and then on."
#~ msgstr       "嘗試移除裝置並將其插回，或是關閉然後開啟。"

#~ msgid        "If you've just installed Solaar, try removing the receiver "
#~      "and plugging it back in."
#~ msgstr       "若您剛剛安裝 Solaar，請嘗試將接收器拔下再重新插上。"

#~ msgid        "Found a Logitech Receiver (%s), but did not have permission "
#~      "to open it."
#~ msgstr       "已發現 1 個羅技接收器 (%s)，但您沒有權限存取。"

#~ msgid        "Send a gesture by sliding the mouse while holding the button "
#~      "down."
#~ msgstr       "按住按鈕時，透過滑動滑鼠來發送手勢。"

#~ msgid        "Adjust the DPI by sliding the mouse horizontally while "
#~      "holding the button down."
#~ msgstr       "按住按鈕時，透過水平滑動滑鼠來調整 DPI。"

#~ msgid        "DPI Sliding Adjustment"
#~ msgstr       "DPI 滑動調整"

#~ msgid        "Automatically switch the mouse wheel between ratchet and "
#~      "freespin mode.\n"
#~      "The mouse wheel is always free at 0, and always ratcheted at 50"
#~ msgstr       "自動在滾輪棘輪模式和自由滾動模式之間切換滑鼠滾輪。\n"
#~      "滾輪在 0 時始終處於自由狀態，而在 50 時始終處於棘輪狀態"

#~ msgid        "Scroll Wheel Rachet"
#~ msgstr       "滾輪棘輪"
