misc: Fix typos

ChangeLog.md

@@ -9,7 +9,7 @@
 * Remove obsolete upower signals.
 * Appinfo/metadata fixes including using correct APP_ID.
 * Fix bugs in solaar config.
-* Add full set of mouse buttons in persistent remappable actions seeting.
+* Add full set of mouse buttons in persistent remappable actions setting.
 * Improve rule behaviour under Wayland and when Xtest or X11 not available.
 * Fix up and document dependencies (evdev, Python, ...).
 
@@ -22,7 +22,7 @@
 * Broaden range of HID++ Bluetooth devices
 * Add setting to divert gestures
 * Rule editor can edit all rule components
-* Configuation via solaar config takes effect in Solaar UI if it is running
+* Configuration via solaar config takes effect in Solaar UI if it is running
 * Add setting to disable Onboard Profiles and decouple from Polling Rate setting
 * Add setting for PERSISTENT_REMAPPABLE_ACTION, common keyboard and mouse cases only
 * Split Test rule condition into Test and TestBytes and support in rule editor

docs/features.md

@@ -154,7 +154,7 @@ A setting implementation for a feature (for modern devices that use the HID++ 2.
 needs a feature identifier.
 A setting implementation needs a reader/writer and a validator.
 
-The reader/writer is resposible for actually writing settings to the device
+The reader/writer is responsible for actually writing settings to the device
 and reading them from the device, writing and reading the byte strings that
 represent the setting values on the device.
 For most feature settings the setting implementation can just inherit
@@ -162,7 +162,7 @@ the standard feature reader/writer, `FeatureRW`.
 
 Options for `FeatureRW` are supplied by the `rw_options` class variable,
 which is used to provide command numbers for reading and writing as well
-as other information needed to identify the parts of the command and reponse
+as other information needed to identify the parts of the command and response
 that hold the setting value and modify the reading and writing procedure.
 `PointerSpeed` uses the defaults; here is an example of specifying non-default commands
 for reading and writing:

docs/rules.md

@@ -68,7 +68,7 @@ evaluating each of their components in order.
 An Or condition is terminated early if a component evaluates to true or the
 last evaluated sub-component of a component is an action.
 A Or condition is true if its last evaluated component evaluates to a true
-value.  `And` conditions take a sequence of components are evaluted the same
+value.  `And` conditions take a sequence of components are evaluated the same
 as rules.
 
 `Feature` conditions are if true if the name of the feature of the current
@@ -195,7 +195,7 @@ Here is a file with six rules:
 ---
 - Key: [M2, pressed]
 - Set: [198E3EB8, dpi, 3000]
-- Execute: [notify-send, Incresed mouse speed]
+- Execute: [notify-send, Increased mouse speed]
 ...
 ---
 - Key: [Host Switch Channel 2, pressed]

docs/usage.md

@@ -90,7 +90,7 @@ moving sliders, or selecting from alternatives.
 
 ![Solaar-main-window-mouse](Solaar-main-window-mouse.png)
 
-Device setings now have a clickable icon that determines whether the
+Device settings now have a clickable icon that determines whether the
 setting can be changed and whether the setting is ignored.
 
 ![Solaar-divert-back](Solaar-main-window-back-divert.png)

lib/logitech_receiver/diversion.py

@@ -100,7 +100,7 @@ except Exception:
 
 xtest_available = True  # Xtest might be available
 xdisplay = None
-Xkbdisplay = None  # xkb might be avilable
+Xkbdisplay = None  # xkb might be available
 modifier_keycodes = []
 XkbUseCoreKbd = 0x100
 

lib/logitech_receiver/hidpp10.py

@@ -44,8 +44,8 @@ DEVICE_KIND = _NamedInts(
     trackball=0x08,
     touchpad=0x09,
     headset=0x0D,  # not from Logitech documentation
-    remote_control=0x0E,  # for compatability with HID++ 2.0
-    receiver=0x0F  # for compatability with HID++ 2.0
+    remote_control=0x0E,  # for compatibility with HID++ 2.0
+    receiver=0x0F  # for compatibility with HID++ 2.0
 )
 
 POWER_SWITCH_LOCATION = _NamedInts(

lib/logitech_receiver/hidpp20.py

@@ -475,7 +475,7 @@ class ReprogrammableKeyV4(ReprogrammableKey):
         self._setCidReporting(flags=flags)
 
     def set_rawXY_reporting(self, value: bool):
-        """If set, the mouse temporarilty reports all its raw XY events while this control is pressed as HID++ events."""
+        """If set, the mouse temporarily reports all its raw XY events while this control is pressed as HID++ events."""
         flags = {special_keys.MAPPING_FLAG.raw_XY_diverted: value}
         self._setCidReporting(flags=flags)
 

lib/logitech_receiver/settings.py

@@ -810,7 +810,7 @@ class BitFieldWithOffsetAndMaskValidator(Validator):
         # each element of options is an instance of a class
         # that has an id (which is used as an index in other dictionaries)
         # and where om_method is a method that returns a byte offset and byte mask
-        # that says how to access and modify the bit toogle for the option
+        # that says how to access and modify the bit toggle for the option
         self.options = options
         self.om_method = om_method
         # to retrieve the options efficiently:
@@ -1203,7 +1203,7 @@ class MultipleRangeValidator(Validator):
                 return None
         return [int(item), {**args[1]}]
 
-    def commpare(self, args, current):
+    def compare(self, args, current):
         _log.warn('compare not implemented for multiple range settings')
         return False
 

lib/logitech_receiver/settings_templates.py

@@ -166,7 +166,7 @@ class RegisterSideScroll(_Setting):
     validator_options = {'true_value': 0x02, 'mask': 0x02}
 
 
-# different devices have different sets of permissable dpis, so this should be subclassed
+# different devices have different sets of permissible dpis, so this should be subclassed
 class RegisterDpi(_Setting):
     name = 'dpi-old'
     label = _('Sensitivity (DPI - older mice)')

lib/logitech_receiver/special_keys.py

@@ -17,7 +17,7 @@
 ## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 
 # Reprogrammable keys information
-# Mostly from Logitech documentation, but with some edits for better Lunix compatability
+# Mostly from Logitech documentation, but with some edits for better Lunix compatibility
 
 from .common import NamedInts as _NamedInts
 from .common import UnsortedNamedInts as _UnsortedNamedInts

release.sh

@@ -89,9 +89,9 @@ echo
 grep '^# '"$version" ChangeLog.md >/dev/null
 [ $? -ne 0 ] && echo 'Error: Version is not present in the changelog' && exit 1
 
-# Check for uncomitted changes
+# Check for uncommitted changes
 git diff --quiet HEAD >/dev/null
-[ $? -ne 0 ] && echo -e '\nError: Uncomitted changes found' && exit 1
+[ $? -ne 0 ] && echo -e '\nError: Uncommitted changes found' && exit 1
 
 # Check if commit is a version bump
 git show -s --format=%B HEAD | grep "^release $version">/dev/null