RGB headsets (e.g. G522) expose HEADSET_RGB_SIGNATURE_EFFECTS (0x0622)
— three firmware-played lighting slots: startup, shutdown, passive.
Each carries an on/off enable, a primary and secondary color, and a
speed.
Add a per-slot setting modeled on the keyboard boot-animation settings
(_RgbBootEffectSetting): a HETERO setting with the enable byte as a
Gtk.Switch plus two color pickers and a speed slider. The rw_class
bridges the firmware's split functions — get/setSignatureEffectParams
(colors + speed) and get/setSignatureEffectState (enable).
Slots are discovered by probing getSignatureEffectState per candidate
(0/1/2), so a device exposing only some slots gets only those
settings. getSignatureEffectsInfo (fn 0) is logged once at debug for a
later move to info-based discovery once its byte layout is confirmed.
Like the boot animations these run autonomously on the device
firmware, so they are not gated on host LED control.
The 0x0604 wire "level" is a gain-step index 0..N-1, not a 0-100
percent. G HUB reads the step count N from getSidetoneLevelSettings
(function 2) and scales: level = (N-1)*pct/100. Solaar wrote the raw
percent, which only matches when N == 101 — so V2 headsets reporting a
smaller N (G522: N=10) got out-of-range step writes the firmware
silently ACK'd without applying.
Read func 2 at build time, take reply byte 2 as N (default 101 when
the call is absent — V1 — or the reply is unusable). The validator now
maps the 0-100 UI percent to/from the wire step index and clamps
writes to N-1. V1 devices (e.g. PRO X 2) keep N=101, which makes the
scaling an exact identity — their wire traffic is unchanged. The raw
func-2 reply is still logged at debug level for a future G HUB
setpoint correlation.
Binary RE of LGHUB established that the 0x0604 wire 'level' is a
gain-step index, not a 0-100 percent: GHUB scales it through a step
count N sourced from getSidetoneLevelSettings (function 2). Solaar
writes a raw percent, which is only correct when N == 101 — so V2
headsets reporting a smaller N (G522/G325) get out-of-range step
writes the firmware silently clamps.
Function 2's byte layout couldn't be recovered from the binary (it
decodes in an inlined lambda). Probe it at build time and log the raw
reply so the next debug log captures where N sits — no behavior
change, gated on DEBUG so it only runs when diagnostics are on.
Setting.apply uses cached=True so the persister is treated as the
source of truth and the device's live state never wins. That model is
correct for most settings, but it created a destructive bug for the
0x020D AdvancedParaEQ:
1. The V2 wire parser went through several iterations during G522
bring-up (commits bde3c3bc, 41db76bc, 59e3dcb7) with different
strides and gain encodings before settling at 7c73c888. Each
intermediate produced different decoded values from the same wire
response; whatever a user's Solaar was on when they last apply'd
got stored to the persister.
2. PerKeyLighting-style `prepare_write` silently fills missing band
keys with 0 dB and clamps out-of-range gain values to the
[gain_min, gain_max] rail. A partial/stale persister dict
therefore encodes as a complete wire payload — looking valid to
the device.
3. Writes were disabled in the early V2 builds (until be047fd9 on
May 10). Once writes shipped, the next apply read the stale
persister, prepare_write filled+clamped it, and setCustomEQ
slot 0 overwrote whatever the user had configured.
Observed on a G325 LIGHTSPEED user log: persister carried
`{0: -6, 1: 1094}` from an older build; apply pushed
`-6 +6 0 0 0 0 0 0 0 0` to slot 0 (band 1 clamped from 1094 to
the +6 dB rail, bands 2-9 zero-filled), wiping the user's
hand-tuned EQ.
Fix: override apply for HeadsetAdvancedEQ. Validate the persister
value against the current validator's count + gain range. If it's
well-formed, push it normally (preserves Solaar's "user config is
authoritative" model). If it's malformed (wrong key count, missing
indices, out-of-range gain), do a live device read and reseed both
_value and the persister from the device — without writing the
corrupt persister back. If both are invalid, log a warning and skip
this setting only; apply_all_settings continues with the rest.
Each LogiVoice module exposes both a state toggle and a read-only
parameters panel. The toggles are reliable, but the parameters panels
only partially decode the GetParameters response — fields not yet
identified surface as opaque hex blobs, which adds UI noise without
giving the user anything actionable (no write path either).
Stop registering the parameters classes in _LOGIVOICE_SETTINGS. The
state toggles still register and work as before. Bring the parameter
panels back when the wire encoding is fully reverse-engineered and a
write path lands.
PerKeyLighting.write was force-claiming SW control via rgb_control.write(True)
through _ensure_sw_control whenever a saved per-key map was applied. On
startup with rgb_control persisted as False, the apply path would re-enable
LED Control and overwrite the persister with True — making "off" impossible
to keep across restarts.
The fix treats rgb_control as the single gate for LED activity: when it's
off, Solaar performs no SW claim, no per-key/zone wire writes, no SW release
on apply (we never claimed), no profile-management restoration, and no
shutdown-animation trigger on exit. This lets another tool (OpenRGB etc.)
drive the LEDs without Solaar fighting it.
Settings that don't actively change current lighting are still allowed:
NV-config writes for startup/shutdown animations, brightness control (its
own feature, no color push), and persister updates for per-key/zone state
so colors survive an off→on toggle.
UI: _apply_rgb_gates already greys per-key/zone/idle/sleep rows when
rgb_control is off. Fix a race where the async-read completion callback in
_update_setting_item would re-set sensitivity from the user lock-icon flag
alone and undo the grey-out if rgb_control's read happened to complete
first. Extract _gate_blocks as the single source of truth and AND-combine
it into _update_setting_item's set_sensitive call.
Software-managed LED persistence and power management for devices that
expose RGBEffects (0x8071) — primarily G515 LIGHTSPEED TKL, but the same
infrastructure works on any 0x8071 device that supports SW takeover.
Core mechanism: RGBControl toggle drives a Set SWControl(mode=3, flags)
handshake. While SW control is held, the host owns the LED pipeline: zone
effects, per-key paint, idle/sleep transitions, and the NvConfig boot/exit
animations. On release, the firmware resumes its onboard profile.
Major pieces:
- rgb_power.py — new module hosting the software RGB power manager:
ACTIVE / DIMMING / IDLE / SLEEPING state machine driven by firmware
onUserActivity events, smooth 5-second dim ramp (zone or per-key), idle
Static color snap, software sleep timer, wake handler that re-pushes
saved state. Includes the cleanup hook that runs on device close (and,
optionally, fires the cap 0x0040 shutdown trigger).
- RGBControl (settings_templates) — switch-style render via BooleanValidator
(true_value=3 / false_value=0) plus a full _claim_sw_control /
_release_sw_control pair: profile-management mode, SetSWControl, per-key
flag reset, manager start, cleanup registration, and a post-claim
repaint pass so the device immediately reflects Solaar's saved zone +
per-key state.
- RGBEffectSetting — zone-effect Setting subclass for 0x8071. Handles
per-key/zone coexistence: per-key paint dominates only when zone is
Static and the user has explicitly opted in via the lock icon; under
animations or before opt-in, the zone wire push is the visible layer.
- RGBIdleEffect / RGBIdleTimeout / RGBSleepTimeout — Solaar-managed idle
behavior. Choice list: "No change" → Dim → Static (snap to color) →
device-specific animations. Static idle substitutes the idle color for
unset per-key cells via effective_zone_base_color's state-aware lookup.
- RgbStartupAnimation / RgbShutdownAnimation — toggle-and-color rows for
RGBEffects NvConfig caps 0x0001 and 0x0040, exposed only on devices
that answer the probe. Shutdown trigger fires SetRgbPowerMode(0) at
cleanup time so the firmware plays the configured animation on exit.
- PerKeyLighting — per-key painter improvements: explicit-opt-in
dominance over zone effects, BUSY retry, FrameEnd suppression on
per-cell failure, single-shot prep sequence (SetEffectByIndex into the
out-of-range slot) on mice with firmware effect cards.
- device_quirks.py — small per-model quirks table keyed by device.modelId
(stable across USB/BLE/wireless). Currently used to mark RGBEffects
NvConfig color slots as inert on devices where the firmware accepts
but ignores the bytes (G502 X PLUS startup colors).
- config_panel.py — HeteroKeyControl gains a TOGGLE field kind that
renders as a Gtk.Switch (used by the boot-effect rows). Visual gate
greys out RGB settings whose prerequisites aren't met: rgb_zone_* /
rgb_idle_* / rgb_sleep_timeout require LED Control = Solaar; per-key
additionally requires every zone effect to be Static. Visual-only —
doesn't touch the persister's user lock-icon state.
- tests/test_rgb_power.py — coverage for the power manager state
machine, dim ramp, idle effects, wake path, and per-key/zone
coexistence.
Closespwr-Solaar/Solaar#3149.
LED Control on both 0x8070 (COLOR_LED_EFFECTS) and 0x8071 (RGB_EFFECTS)
features is a ChoicesValidator with exactly two values, Device=0 and
Solaar=1 — semantically a binary toggle dressed up as a dropdown. Render
both as a Gtk.Switch (Solaar=on, Device=off) by swapping ChoicesValidator
for BooleanValidator with true_value=1 / false_value=0.
BooleanValidator's kind is TOGGLE, which the existing config_panel
dispatcher already maps to ToggleControl (Gtk.Switch). No UI plumbing
changes required.
Add a small _pre_read override to migrate persister entries from the old
ChoicesValidator (stored as int 0/1) to bool, so the switch widget gets
a value it can pass to Gtk.Switch.set_state().
Tooltip cleanup to match the new styling:
- "Switch control of LED zones between device and Solaar" → "Allow Solaar
to control LED zones." on both control rows.
- "LED Control needs to be set to Solaar to be effective." → "LED Control
needs to be enabled." on every dependent setting's tooltip.
Setting names (led_control / rgb_control) and persister keys are
unchanged; only the YAML value type migrates from int to bool on the next
read.
The 0x8081 PerKeyLighting v2 protocol has no GetIndividualRgbZones
function — there's no way to ask the device what colors are currently
on the per-key buffer over HID++. PerKeyLighting.read() papered over
this gap by fabricating an all-"No change" sentinel map whenever the
caller asked for a live (uncached) read, which produced misleading
solaar show output like:
Per-key Lighting (saved): {1:0xc01c28, 2:0xc52d26, ...}
Per-key Lighting : {1:No change, 2:No change, ...}
— even with the keyboard clearly running the saved colors.
Two-part fix:
1. PerKeyLighting.read() now returns self._value if populated (from
prior write or persister) regardless of `cached`. Only fabricates
the all-"No change" map when there's truly no state — fresh device,
no prior write, nothing persisted. This is the right starting state
in that case because per-key writes are additive over a buffer of
unknown content.
Other callers benefit too: solaar config calls read(cached=False) on
per-key settings to display current values, and prior to this
change it would get fabricated sentinels back instead of the
in-memory map.
2. Add a `live_readable = True` class attribute to Setting (default
preserves existing behavior). Override to False on PerKeyLighting.
solaar show gates its live-read print on this flag, so non-readable
settings show only the (saved) line — which is the authoritative
record of what was last written to a setting whose live state can't
be read back.
After both fixes solaar show prints just:
Per-key Lighting (saved): {1:0xc01c28, 2:0xc52d26, ...}
— honest about what we know.
690 tests pass; pre-commit clean.
24-bit RGB values stored in PerKeyLighting per-key maps and in
LEDEffectSetting `.color` fields currently dump as decimal integers in
both the YAML config file and `solaar show` output:
per-key-lighting: {1: -1, 2: 16733440, 3: 16755200, ...}
LEDs Keys: {1:-1, 2:16733440, 3:16755200, ...}
Hex is the canonical RGB representation. Render colors as `0xrrggbb`
everywhere: solaar show output, repr, and YAML config dumps. Both new
values and legacy values from pre-existing YAML configs migrate
transparently.
Implementation: a `ColorInt(int)` subclass in `common.py`.
- `str(c)` / `repr(c)` → `'0xrrggbb'` for 0..0xFFFFFF; falls back to
decimal for out-of-range values so sentinels like
`COLORSPLUS["No change"] = -1` still display naturally.
- Constructor accepts ints AND hex strings (`'0xrrggbb'` or
`'#rrggbb'`) so pre-existing configs that wrote decimal continue
to load.
- YAML representer emits a hex int literal (`tag:yaml.org,2002:int`
with style `'0xrrggbb'`). YAML 1.1 parses hex int literals back as
plain ints with no custom loader registration — values round-trip
cleanly without a custom YAML tag.
Wiring:
- `Range` gains a `value_type=int` field; `MapRangeValidator.validate_read`
wraps results through `rng.value_type(...)`. PerKeyLighting's
`_COLOR_RANGE` sets `value_type=ColorInt`; other Range users keep
the int default with no behavior change.
- PerKeyLighting overrides `update()` and `update_key_value()` to wrap
raw ints in `ColorInt` at write time. `type(v) is int` (exact
match, not isinstance) deliberately excludes NamedInt sentinels and
avoids re-wrapping existing ColorInts.
- `LEDEffectSetting.__init__` wraps the `color` param in `ColorInt`
with the same guard, so zone-effect color round-trips as hex
through `yaml.dump(setting)` / `val_to_string`.
- `MapRangeValidator.to_string` re-wraps raw ints loaded from YAML
(which `yaml.safe_load` returns as plain Python ints regardless of
the choice's `value_type`) through `rng.value_type` before
formatting. Without this, `solaar show` would render legacy saved
values as decimal even after the rest of the pipeline is hex-aware.
Coverage: 12 new unit tests across `test_common.py` and
`test_settings_validator.py`:
- ColorInt str/repr, equality with plain int, hex-string constructor
(0x / 0X / # prefixes), out-of-range fallback to decimal, YAML
dump format, plain-int round-trip on load, dict-value formatting.
- MapRangeValidator.to_string: plain-int re-wrap via value_type,
pass-through for already-wrapped ColorInts, NamedInt sentinel
preservation, and no behavior change for int-typed Ranges.
Existing test fixtures updated: _PERKEY_COLOR_RANGE now carries
value_type=ColorInt to match runtime _COLOR_RANGE.
702 tests pass; pre-commit clean.
Replace the per-key dropdown UI (MapChoiceControl) with a Cairo-rendered
keyboard canvas where users can paint colors directly onto keys.
Editor (lib/solaar/ui/perkey/):
- Cairo DrawingArea renders cells from a Layout dataclass; bound cells
take their painted color, unset cells show a diagonal hash whose base
color matches the device's rgb_zone_* setting.
- Tools: brush, drag-rectangle, flood-fill (4-adjacent, Paint-style),
and a directional gradient (line A->B projected across the matrix
with cells past the endpoints clamped to the endpoint colors).
- GradientSwatch is the single source of truth for the gradient's two
colors; the canvas reads from it on each gradient stroke.
- Palette: GTK ColorButton plus an unset toggle that paints the
"no change" sentinel (-1).
- PerKeyEditorDialog auto-sizes from the canvas's size_request, so a
104-key keyboard opens wide and a 8-LED mouse opens compact.
- Editor consumes only a narrow PerKeyColorSink protocol; never imports
from lib/logitech_receiver, preserving the FE/BE seam.
- Per-device palette state (active + previous color) persists via the
existing persister under a _palette: prefixed key.
Layouts:
- ANSI 104-key full-size and TKL keyboard layouts.
- G502 X family mouse layout (zones 1-8 -> labels A-H).
- Generic registry: register_layout(feature, matcher, layout). A
_name_contains() helper builds case-insensitive substring matchers
against device codename / name. Unknown devices fall back to a flat
strip of all reported zones.
Validator (open value space):
- New Range dataclass and MapRangeValidator extending Validator
directly (kind=MAP_CHOICE for dispatch compatibility). Replaces the
ChoicesMapValidator on PerKeyLighting -- the named-color universe
(COLORSPLUS) was rejecting any picker color outside its ~20 entries.
Other MAP_CHOICE settings are untouched.
Integration:
- Setting base gains an editor_class string attribute. config_panel's
_create_sbox resolves it via importlib before the kind dispatch, so
PerKeyLighting routes to the new editor without a new Kind value.
- CLI gains a hex/dec parser for open-value MAP_CHOICE settings:
solaar config <dev> per-key-lighting A 0xFF00FF
- Diversion rule editor skips Range-valued MAP_CHOICE settings'
value-selector instead of crashing on the open value space.
- pycairo declared in install_requires; transitively present on most
systems but now explicit for pip-from-source installs.
Tests in test_setting_templates.py updated for the new validator.
The AnalogButtons feature packs each tunable in bits 7..2 of its byte
(wire = logical << 2); byte 2 bit 0 is a firmware-managed sensitivity
flag, the rest of the low bits are reserved-zero. Solaar 1.1.19 sent
the slider value verbatim, so any logical 1/2/3 produced wire bytes
0x01/0x02/0x03 — non-zero reserved bits and below the logical minimum,
hence INVALID_ARGUMENT (issue #3202). Only multiples of 4 happened to
land on a valid wire byte.
Decode bytes 1/2/3 of getConfig and caps[2..4] of getCapabilities by
right-shifting 2; left-shift the user value by 2 on setConfig and OR
back the prior sensitivity bit on rapid-trigger writes. Defaults
fallbacks updated to logical mid-points and the validator maxima now
reflect the real ranges (actuation 1..10, rapid trigger 1..5, haptics
0..5).
Persisted values from 1.1.19 were raw wire bytes (e.g. 40), which now
exceed the new max and would fail apply()'s prepare_write. A new
_AnalogButtonSetting subclass migrates such values in _pre_read by
dividing by 4 when the result lands inside the new valid range, and
rewrites the persister so the migration is one-shot.
* Add Centurion transport and PRO X 2 LIGHTSPEED headset support
Adds support for the Logitech PRO X 2 LIGHTSPEED Gaming Headset (PID 0x0AF7)
which uses the Centurion transport protocol (report ID 0x51 on USB usage page
0xFFA0) instead of standard HID++ report IDs.
Changes:
- HID enumeration: detect Centurion devices via report descriptor parsing
(usage page 0xFFA0, report ID 0x51, 63-byte frames)
- Centurion transport: wrap/unwrap HID++ 2.0 frames in Centurion framing
for write, read, and ping operations
- Feature discovery: enumerate features individually on Centurion devices
(different response format: [remaining_count, feat_hi, feat_lo])
- Device descriptor for PRO X 2 LIGHTSPEED Gaming Headset
- New feature enum entries for Centurion-era headset features (0x06xx)
- CenturionRawRW class for write-only headset settings controlled via
raw Centurion commands reverse-engineered from HeadsetControl
- HeadsetSidetone setting (0-100 range, persisted locally)
Known limitations:
- Only sidetone control is implemented; other features need RE work
- Settings are write-only (no read-back from device)
- Headset features (0x06xx) not discoverable via IRoot; registered manually
* Remove static PRO X 2 descriptor; fully probe Centurion devices at runtime
Replace the hardcoded descriptor entry with dynamic discovery of all device
properties via the Centurion protocol. The headset name, kind, serial,
firmware, and battery are now probed at runtime — matching how the device
actually presents itself rather than relying on static data.
Key changes:
- Discover sub-device features via CentPPBridge and route requests through
the bridge automatically
- Infer device kind from feature IDs (0x06xx = headset) for both wireless
and direct USB connections
- Read device name from USB product string with protocol probe fallback
- Parse bridge error responses (sub_feat_idx=0xFF) instead of timing out
- Handle unknown HID++ error codes gracefully in base.py
- Fix firmware deduplication for Centurion parent devices
- Prefer sub-device serial/firmware over parent (non-printable) values
- Add Centurion-aware display in solaar show with parent/sub-device sections
- Support both wireless (0AF7 dongle) and direct USB (0AF8) connections
* Display Centurion dongle as receiver with headset as child device
- Add CenturionReceiver class that provides the Receiver UI interface so
the dongle appears as a parent with the headset indented underneath,
matching how Lightspeed/Unifying receivers display
- Independently probe dongle features via feature_request() on the
CenturionReceiver, separate from headset features via bridge
- Fix bridge notification dispatch: remove incorrect sub_cpl=0xFF filter
that was silently dropping all battery and other notifications
- Fix battery status decoding: charging status is at byte 2 (not byte 1)
of the CENTURION_BATTERY_SOC response
- Detect wired vs wireless by checking for CentPPBridge in discovered
features; wired headsets fall back to standalone Device
- Name the dongle "Centurion Receiver" to distinguish from the headset
- Filter unprintable dongle serial (control characters 0x14-0x1F)
- Update CLI show output with proper receiver/child hierarchy and spacing
* Fix headset setting validators and code formatting
- Add signed int8 support to RangeValidator for HeadsetMicGain (0x0611)
- Make HeadsetSidetone version-aware: v1 uses 2-byte skip, v2+ uses
3-byte skip with 0xFF separator per protocol spec
- Fix ruff formatting in device.py, listener.py, udev_impl.py
- Update CenturionReceiver test for renamed receiver
* Use ConnectionStateChangedEvent for headset online/offline detection
Replace ad-hoc heuristics with proper bridge event function dispatch:
- Function 0 (ConnectionStateChangedEvent): parse sub-device list length
to determine connect (len>0) vs disconnect (len=0)
- Function 1 (MessageEvent): fallback online detection if headset sends
a message while marked offline (handles cold-start power-on)
Remove CPL sub_id>=0x80 fallback in listener that misidentified HID++
error replies as disconnect events. Skip HID++ 1.0
set_configuration_pending_flags for CenturionReceiver (not supported).
Also adds OnboardEQ (0x0636) support, bridge multi-fragment sends,
bridge-based headset ping probe, and CLI offline display.
* Update PRO X 2 LIGHTSPEED device doc with current solaar show output
* Fix Centurion protocol version display (1.16 not 2.6)
The HID++ ping math (major + minor/10.0) produced a bogus "2.6" for
Centurion devices whose ProtocolCapabilities returns major=1, minor=0x10.
Store the raw (major, minor) bytes from the ping response and display
them correctly as "Centurion 1.16" in both CLI and GUI.
* Add OnboardEQ (0x0636) support for Centurion headsets
Implement host-computed biquad EQ coefficient generation and multi-fragment
bridge writes for the PRO X 2 LIGHTSPEED headset's 5-band parametric EQ.
The coefficient algorithm uses standard Audio EQ Cookbook peaking EQ formulas
with a simplified rescale normalization (max_b0 × 1.19 headroom). This is our
own implementation — not an exact replica of LGHUB's ~350-line per-band cascade
normalization — but it produces functionally correct results. The DSP
compensates via the rescale factor, and the EQ changes are audible and working
on real hardware.
Wire format verified against 38 LGHUB pcap writes:
- 4-byte LE section headers, LE uint16 coefficient words
- Mixed Q1.31/Q2.30 fixed-point with 24-bit precision
- Only b-coefficients divided by rescale; a-coefficients unchanged
- Two sections: 48kHz playback + 16kHz mic
- No trailing padding, no extra words between sections
Changes:
- base.py: Add flags parameter to write_centurion_cpl() for multi-fragment CPL
- device.py: Rewrite multi-fragment bridge send — proper CPL fragmentation with
fragment 0 carrying bridge prefix/hdr and continuations carrying raw sub_msg,
all fragments sent back-to-back without intermediate ACKs
- hidpp20.py: Replace placeholder coefficient code with full biquad math,
mixed Q-format quantization, rescale normalization, and dual-section output
- settings_templates.py: Persist EQ to slot 0x80 after writing to slot 0x00
so settings survive power cycle
- tests: Update expected SetEQParameters payloads for new coefficient format
* Extract Centurion protocol into separate modules
Move CenturionReceiver class, factory function, and Centurion protocol
queries (firmware, serial, hardware info, battery, name) from device.py
and hidpp20.py into new centurion.py module. Move OnboardEQ biquad math
and payload builders from hidpp20.py into new onboard_eq.py module.
Move _read_usb_product_string() to common.py to avoid circular imports.
Re-exports preserve backward compatibility for all existing callers.
* Add vertical graphic EQ slider widget for headset equalizer
Replace horizontal slider rows with a traditional graphic EQ layout
using vertical sliders side-by-side, with dB value display and
frequency labels per band.
* Fix device online state clobbered by debug ping in _status_changed
The INFO-level logging guard in _status_changed() called device.ping()
before logging, purely to show accurate online status. But ping() has
side effects — it sets device.online based on the result. When a
ConnectionStateChangedEvent correctly marked a device online, the
subsequent _status_changed() callback would re-ping. If the device
wasn't ready yet (e.g. Centurion headset still booting), the ping
timed out and set online back to False, requiring 2-3 power cycles
to sync state.
Remove the unnecessary ping — the log message already reads
device.online which reflects the state set by the event handler.
* Sort feature constants by ID and add PROFILE_MANAGEMENT
Move RPM_INDICATOR/RPM_LED_PATTERN (0x807A-B) before PER_KEY_LIGHTING
(0x8080-81), sort five Centurion-era headset entries into their correct
positions by feature ID, and add missing PROFILE_MANAGEMENT = 0x8101.
* Add CenturionCoreFeature enum for colliding feature IDs
Centurion transport reuses HID++ 2.0 feature IDs 0x0000, 0x0001,
0x0003, 0x0005, 0x0007 with different meanings. Since SupportedFeature
(IntEnum) requires unique values, create a separate CenturionCoreFeature
enum and resolve_feature() helper for transport-aware lookup.
Also replace the +0x100 offset hack in FeaturesArray.inverse with a
dedicated sub_inverse dict for sub-device feature indexing.
* Fix ruff I001 import sorting in centurion.py and hidpp20.py
* Add 9 missing centurion/headset feature names
Add feature constants split out from the HID++ 2.0 names PR (#3153):
CENTURION_LED_BRIGHTNESS (0x0110), CENTURION_EU_POWER_MODE (0x0115),
CENTURION_DEVICE_BOOL_STATE (0x0116), HEADSET_ADVANCED_PARA_EQ (0x020D),
HEADSET_MIC_TEST (0x020E), HEADSET_EQ_STYLES (0x0213),
BT_HOST_INFO (0x0305), LIGHTSPEED_PAIRING (0x0309),
BT_GAMING_MODE (0x030A).
* Extract _record_ping_protocol helper so all ping paths capture Centurion version
The raw Centurion (major, minor) pickup was only in the Centurion-child
dongle branch of Device.ping(). Wired Centurion variants (e.g. PRO X 2
LIGHTSPEED 046d:0AF8) go through the generic fallback branch and never
recorded the raw version, so they displayed "Centurion 2.6" instead of
"Centurion 1.16".
Extract the protocol + centurion version recording into a helper and
call it from both branches.
---------
Co-authored-by: Peter F. Patel-Schneider <pfpschneider@gmail.com>
* feat: PRO X 2 Superstrike support with click haptics, actuation point and rapid trigger config support
* feat: PRO X 2 Superstrike docs
* docs: document PRO X 2 Superstrike features, device entry, and capabilities
* fix: code review points
# Conflicts:
# lib/logitech_receiver/hidpp20_constants.py
* Fix the write_key_value for dpi_extended
I was playing with the branch from the MR and I wanted to fix the cli stuff, it now properly sets when I use:
solaar config 1 dpi_extended X 400
Should be enough
Signed-off-by: Shane Fagan <mail@shanefagan.com>
* Fix ruff style check
---------
Signed-off-by: Shane Fagan <mail@shanefagan.com>
Co-authored-by: Shane Fagan <mail@shanefagan.com>
* Remove duplicated Param definition
Use constants from hidpp20 constants
Related #2273
* hidpp20/Param: Refactor to use IntEnum
Related #2273
* hidpp20_constants: Refactor to use IntEnum
Related #2273
* Refactor HID Register definitions
Use enums for distinct type hints, easy discovery of registers.
Make constants uppercase and benefit from enum auto-completion.
Related #2273
* Improve type hints: Registers
Ken Sanislo
Ken Sanislo
Caio Quirino da Silva
Peter F. Patel-Schneider
Niko Savola
danicc097
DomHeadroom
MattHag
Max Ammann