# French translations for solaar package.
# Copyright (C) 2013 THE solaar'S COPYRIGHT HOLDER
# This file is distributed under the same license as the solaar package.
# Automatically generated, 2013.
#
msgid   ""
msgstr  "Project-Id-Version: solaar 0.9.2\n"
        "Report-Msgid-Bugs-To: \n"
        "POT-Creation-Date: 2013-08-08 21:51+0200\n"
        "PO-Revision-Date: 2013-08-07 14:43+0200\n"
        "Last-Translator: Damien Lallement <dams@mageia.org>\n"
        "Language-Team: Language: fr\n"
        "Language: fr\n"
        "MIME-Version: 1.0\n"
        "Content-Type: text/plain; charset=UTF-8\n"
        "Content-Transfer-Encoding: 8bit\n"
        "Plural-Forms: nplurals=2; plural=(n > 1);\n"

#: lib/logitech_receiver/i18n.py:38
msgid   "critical"
msgstr  "critique"

#: lib/logitech_receiver/i18n.py:38
msgid   "empty"
msgstr  "vide"

#: lib/logitech_receiver/i18n.py:38 lib/logitech_receiver/i18n.py:41
msgid   "full"
msgstr  "pleine"

#: lib/logitech_receiver/i18n.py:38
msgid   "good"
msgstr  "bonne"

#: lib/logitech_receiver/i18n.py:38
msgid   "low"
msgstr  "faible"

#: lib/logitech_receiver/i18n.py:41
msgid   "almost full"
msgstr  "presque pleine"

#: lib/logitech_receiver/i18n.py:41
msgid   "discharging"
msgstr  "En décharge"

#: lib/logitech_receiver/i18n.py:41
msgid   "recharging"
msgstr  "En charge"

#: lib/logitech_receiver/i18n.py:42
msgid   "invalid battery"
msgstr  "batterie invalide"

#: lib/logitech_receiver/i18n.py:42
msgid   "slow recharge"
msgstr  "recharge lente"

#: lib/logitech_receiver/i18n.py:42
msgid   "thermal error"
msgstr  "erreur thermique"

#: lib/logitech_receiver/i18n.py:45
msgid   "device not supported"
msgstr  "périphérique non pris en charge"

#: lib/logitech_receiver/i18n.py:45
msgid   "device timeout"
msgstr  "le périphérique ne répond pas"

#: lib/logitech_receiver/i18n.py:45
msgid   "sequence timeout"
msgstr  "dépassement de délai"

#: lib/logitech_receiver/i18n.py:45
msgid   "too many devices"
msgstr  "trop de périphériques"

#: lib/logitech_receiver/i18n.py:48
msgid   "Bootloader"
msgstr  "Chargeur d'amorçage"

#: lib/logitech_receiver/i18n.py:48 lib/solaar/ui/window.py:535
msgid   "Firmware"
msgstr  "Micrologiciel"

#: lib/logitech_receiver/i18n.py:48
msgid   "Hardware"
msgstr  "Matériel"

#: lib/logitech_receiver/i18n.py:48
msgid   "Other"
msgstr  "Autre"

#: lib/logitech_receiver/notifications.py:67
msgid   "closed"
msgstr  "fermé"

#: lib/logitech_receiver/notifications.py:67
msgid   "open"
msgstr  "ouvert"

#: lib/logitech_receiver/notifications.py:67
msgid   "pairing lock is "
msgstr  "le verrou de jumelage est "

#: lib/logitech_receiver/notifications.py:150 lib/solaar/ui/notify.py:118
msgid   "unpaired"
msgstr  "non jumelé"

#: lib/logitech_receiver/notifications.py:192
msgid   "powered on"
msgstr  "sous tension"

#: lib/logitech_receiver/receiver.py:107 lib/solaar/ui/window.py:622
msgid   "unknown"
msgstr  "inconnu"

#: lib/logitech_receiver/settings_templates.py:77
msgid   "Smooth Scrolling"
msgstr  "Défilement fluide"

#: lib/logitech_receiver/settings_templates.py:78
msgid   "High-sensitivity mode for vertical scroll with the wheel."
msgstr  "Mode haute sensibilité pour défilement vertical avec la molette."

#: lib/logitech_receiver/settings_templates.py:79
msgid   "Side Scrolling"
msgstr  "Défilement latéral"

#: lib/logitech_receiver/settings_templates.py:80
msgid   "When disabled, pushing the wheel sideways sends custom button "
        "events\n"
        "instead of the standard side-scrolling events."
msgstr  "Lorsque désactivé, l'appui sur les côtés de la molette envoie des "
        "évènements\n"
        " de bouton personnalisés à la place des évènements standards de "
        "défilement latéral."

#: lib/logitech_receiver/settings_templates.py:82
msgid   "Sensitivity (DPI)"
msgstr  "Sensibilité (DPI)"

#: lib/logitech_receiver/settings_templates.py:83
msgid   "Swap Fx function"
msgstr  "Fonction Swap Fx"

#: lib/logitech_receiver/settings_templates.py:84
msgid   "When set, the F1..F12 keys will activate their special function,\n"
        "and you must hold the FN key to activate their standard function."
msgstr  "Lorsque défini, les touches F1..F12 activeront leurs fonctions "
        "spéciales,\n"
        "et vous devez maintenir la touche FN pour activer leurs fonctions "
        "standards."

#: lib/logitech_receiver/settings_templates.py:87
msgid   "When unset, the F1..F12 keys will activate their standard function,\n"
        "and you must hold the FN key to activate their special function."
msgstr  "Lorsque non défini, les touches F1..F12 activeront leurs fonctions "
        "standards,\n"
        "et vous devez maintenir la touche FN pour activer leurs fonctions "
        "spéciales."

#: lib/logitech_receiver/settings_templates.py:89
msgid   "Hand Detection"
msgstr  "Détection manuelle"

#: lib/logitech_receiver/settings_templates.py:90
msgid   "Turn on illumination when the hands hover over the keyboard."
msgstr  "Allume l'éclairage lorsque les mains passent au-dessus du clavier."

#: lib/logitech_receiver/status.py:98
msgid   "No paired devices."
msgstr  "Aucun périphériques jumelés"

#: lib/logitech_receiver/status.py:99
msgid   "1 paired device."
msgstr  "1 périphérique jumelé."

#: lib/logitech_receiver/status.py:100
msgid   " paired devices."
msgstr  " périphériques jumelés."

#: lib/logitech_receiver/status.py:149 lib/logitech_receiver/status.py:151
#: lib/solaar/ui/window.py:143
msgid   "Battery"
msgstr  "Batterie"

#: lib/logitech_receiver/status.py:162 lib/solaar/ui/window.py:150
msgid   "Lighting"
msgstr  "Éclairage"

#: lib/logitech_receiver/status.py:162 lib/solaar/ui/window.py:663
msgid   "lux"
msgstr  "lux"

#: lib/solaar/listener.py:95
msgid   "The receiver was unplugged."
msgstr  "Le récepteur a été débranché."

#: lib/solaar/ui/__init__.py:48
msgid   "Permissions error"
msgstr  "Erreur de permissions"

#: lib/solaar/ui/__init__.py:49
#, python-format
msgid   "Found a Logitech Receiver (%s), but did not have permission to open "
        "it."
msgstr  "Trouvé un récepteur Logitech (%s), mais n'a pas eu l'autorisation de "
        "l'ouvrir."

#: lib/solaar/ui/__init__.py:51
msgid   "If you've just installed Solaar, try removing the receiver and "
        "plugging it back in."
msgstr  "Si vous venez juste d'installer Solaar, essayez de retirer le "
        "récepteur et de le rebrancher."

#: lib/solaar/ui/__init__.py:53
msgid   "Unpairing failed"
msgstr  "La déconnexion a échoué"

#: lib/solaar/ui/__init__.py:54
#, python-brace-format
msgid   "Failed to unpair %{device} from %{receiver}."
msgstr  "Impossible de dissocier %{device} de %{receiver}."

#: lib/solaar/ui/__init__.py:56
msgid   "The receiver returned an error, with no further details."
msgstr  "Le récepteur a retourné une erreur, sans plus de détails."

#: lib/solaar/ui/about.py:39
msgid   "Shows status of devices connected\n"
        "through wireless Logitech receivers."
msgstr  "Affiche l'état des périphériques connectés\n"
        "à travers les récepteurs sans fil Logitech."

#: lib/solaar/ui/about.py:48
msgid   "GUI design"
msgstr  "Interface graphique"

#: lib/solaar/ui/about.py:49
msgid   "Testing"
msgstr  "Testeur"

#: lib/solaar/ui/about.py:54
msgid   "Logitech documentation"
msgstr  "Documentațion Logitech"

#: lib/solaar/ui/action.py:68 lib/solaar/ui/window.py:316
msgid   "About"
msgstr  "À propos de"

#: lib/solaar/ui/action.py:95 lib/solaar/ui/action.py:98
#: lib/solaar/ui/window.py:203
msgid   "Unpair"
msgstr  "Déconnecter"

#: lib/solaar/ui/config_panel.py:97
msgid   "Working"
msgstr  "En fonctionnement"

#: lib/solaar/ui/config_panel.py:100
msgid   "Read/write operation failed."
msgstr  "Les opérations de lecture/écriture ont échoué."

#: lib/solaar/ui/notify.py:120
msgid   "connected"
msgstr  "connecté"

#: lib/solaar/ui/notify.py:122 lib/solaar/ui/tray.py:290
#: lib/solaar/ui/tray.py:295 lib/solaar/ui/window.py:653
msgid   "offline"
msgstr  "non connecté"

#: lib/solaar/ui/pair_window.py:133
msgid   "Pairing failed"
msgstr  "Le jumelage a échoué"

#: lib/solaar/ui/pair_window.py:135
msgid   "Make sure your device is within range, and has a decent battery "
        "charge."
msgstr  "Assurez-vous que votre périphérique soit à portée, et que sa "
        "batterie soit suffisamment chargée."

#: lib/solaar/ui/pair_window.py:137
msgid   "A new device was detected, but it is not compatible with this "
        "receiver."
msgstr  "Un nouveau périphérique a été détecté, mais il n'est pas compatible "
        "avec ce récepteur."

#: lib/solaar/ui/pair_window.py:139
#, python-format
msgid   "The receiver only supports %d paired device(s)."
msgstr  "Le récepteur supporte seulement %d périphérique(s). "

#: lib/solaar/ui/pair_window.py:141
msgid   "No further details are available about the error."
msgstr  "Aucun autre détail n'est disponible à propos de l'erreur."

#: lib/solaar/ui/pair_window.py:155
msgid   "Found a new device"
msgstr  "Nouveau périphérique disponible"

#: lib/solaar/ui/pair_window.py:180
msgid   "The wireless link is not encrypted"
msgstr  "La connexion sans fil n'est pas chiffrée"

#: lib/solaar/ui/pair_window.py:197
msgid   "pair new device"
msgstr  "Jumele le nouveau périphérique"

#: lib/solaar/ui/pair_window.py:205
msgid   "Turn on the device you want to pair."
msgstr  "Allumez le périphérique que vous souhaitez jumeler."

#: lib/solaar/ui/pair_window.py:206
msgid   "If the device is already turned on,\n"
        "turn if off and on again."
msgstr  "Si le périphérique est déjà allumé,\n"
        "éteignez le et rallumez-le à nouveau."

#: lib/solaar/ui/tray.py:55
msgid   "No Logitech receiver found"
msgstr  "Aucun récepteur Logitech trouvé"

#: lib/solaar/ui/tray.py:62
msgid   "Quit"
msgstr  "Quitter"

#: lib/solaar/ui/tray.py:274
msgid   "no receiver"
msgstr  "aucun récepteur"

#: lib/solaar/ui/tray.py:293
msgid   "no status"
msgstr  "aucun statut"

#: lib/solaar/ui/window.py:58
msgid   "The wireless link between this device and its receiver is encrypted."
msgstr  "La connexion sans fil entre cet appareil et son récepteur est "
        "chiffrée."

#: lib/solaar/ui/window.py:59
msgid   "The wireless link between this device and its receiver is not "
        "encrypted.\n"
        "\n"
        "For pointing devices (mice, trackballs, trackpads), this is a minor "
        "security issue.\n"
        "\n"
        "It is, however, a major security issue for text-input devices "
        "(keyboards, numpads),\n"
        "because typed text can be sniffed inconspicuously by 3rd parties "
        "within range."
msgstr  "La connexion sans fil entre cet appareil et son récepteur n'est pas "
        "chiffrée.\n"
        "\n"
        "Pour des dispositifs de pointage (souris, trackball, trackpad), "
        "c'est une faille mineure de sécurité\n"
        "\n"
        "Par contre, c'est une faille majeure pour les dispositifs d'entrée "
        "de texte (clavier, pavé numérique)\n"
        "car les données saisies peuvent être volées à votre insu par des "
        "tiers à proximité."

#: lib/solaar/ui/window.py:67 lib/solaar/ui/window.py:71
msgid   "No device paired"
msgstr  "Aucun périphérique jumelé"

#: lib/solaar/ui/window.py:67 lib/solaar/ui/window.py:68
#, python-format
msgid   "Up to %d devices can be paired to this receiver"
msgstr  "Jusqu'à %d périphériques peuvent être jumelés à ce récepteur"

#: lib/solaar/ui/window.py:68
msgid   "paired devices"
msgstr  "périphérique(s) jumelé(s)"

#: lib/solaar/ui/window.py:72
msgid   "Only one device can be paired to this receiver"
msgstr  "Un seul périphérique peut être jumelé à ce récepteur"

#: lib/solaar/ui/window.py:110
msgid   "Scanning"
msgstr  "Balayage"

#: lib/solaar/ui/window.py:146
msgid   "Wireless Link"
msgstr  "Connexion sans fil"

#: lib/solaar/ui/window.py:179
msgid   "Show Technical Details"
msgstr  "Voir les détails techniques"

#: lib/solaar/ui/window.py:192
msgid   "Pair new device"
msgstr  "Jumeler un nouveau périphérique"

#: lib/solaar/ui/window.py:211
msgid   "Select a device"
msgstr  "Sélectionner un périphérique"

#: lib/solaar/ui/window.py:508
msgid   "Path"
msgstr  "Chemin"

#: lib/solaar/ui/window.py:510
msgid   "USB id"
msgstr  "Id USB"

#: lib/solaar/ui/window.py:513 lib/solaar/ui/window.py:515
#: lib/solaar/ui/window.py:527 lib/solaar/ui/window.py:529
msgid   "Serial"
msgstr  "Numéro de série"

#: lib/solaar/ui/window.py:519
msgid   "Index"
msgstr  "Index"

#: lib/solaar/ui/window.py:520
msgid   "Wireless PID"
msgstr  "PID sans fil"

#: lib/solaar/ui/window.py:522
msgid   "Protocol"
msgstr  "Protocole"

#: lib/solaar/ui/window.py:524
msgid   "Polling rate"
msgstr  "Taux de scrutation"

#: lib/solaar/ui/window.py:539
msgid   "none"
msgstr  "aucun"

#: lib/solaar/ui/window.py:540
msgid   "Notifications"
msgstr  "Notifications"

#: lib/solaar/ui/window.py:635
msgid   "charging"
msgstr  "en charge"

#: lib/solaar/ui/window.py:637
msgid   "last known"
msgstr  "dernière valeur connue"

#: lib/solaar/ui/window.py:644
msgid   "not encrypted"
msgstr  "non chiffrée"

#: lib/solaar/ui/window.py:648
msgid   "encrypted"
msgstr  "chiffrée"