# Polish translations for solaar package.
# Copyright (C) 2013 THE solaar'S COPYRIGHT HOLDER
# This file is distributed under the same license as the solaar package.
# Automatically generated, 2013.
#
msgid   ""
msgstr  "Project-Id-Version: solaar 0.9.1\n"
        "Report-Msgid-Bugs-To: \n"
        "POT-Creation-Date: 2019-07-27 07:22+0200\n"
        "PO-Revision-Date: 2017-09-19 19:55+0100\n"
        "Last-Translator: Michał Bokiniec <michal2229@gmail.com>\n"
        "Language-Team: none\n"
        "Language: pl\n"
        "MIME-Version: 1.0\n"
        "Content-Type: text/plain; charset=UTF-8\n"
        "Content-Transfer-Encoding: 8bit\n"
        "Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n"
        "%100<10 || n%100>=20) ? 1 : 2);\n"
        "X-Generator: Poedit 1.5.4\n"

#: lib/logitech_receiver/i18n.py:40
msgid   "critical"
msgstr  "krytyczny"

#: lib/logitech_receiver/i18n.py:40
msgid   "empty"
msgstr  "pusty"

#: lib/logitech_receiver/i18n.py:40
msgid   "full"
msgstr  "pełny"

#: lib/logitech_receiver/i18n.py:40
msgid   "good"
msgstr  "dobry"

#: lib/logitech_receiver/i18n.py:40
msgid   "low"
msgstr  "niski"

#: lib/logitech_receiver/i18n.py:43
msgid   "almost full"
msgstr  "prawie pełny"

#: lib/logitech_receiver/i18n.py:43
msgid   "charged"
msgstr  ""

#: lib/logitech_receiver/i18n.py:43
msgid   "discharging"
msgstr  "rozładowywanie"

#: lib/logitech_receiver/i18n.py:43
msgid   "recharging"
msgstr  "ładowanie"

#: lib/logitech_receiver/i18n.py:44
msgid   "invalid battery"
msgstr  "nieprawidłowa bateria"

#: lib/logitech_receiver/i18n.py:44
msgid   "slow recharge"
msgstr  "wolne ładowanie"

#: lib/logitech_receiver/i18n.py:44
msgid   "thermal error"
msgstr  "błąd temperatury"

#: lib/logitech_receiver/i18n.py:47
msgid   "device not supported"
msgstr  "urządzenie nie obsługiwane"

#: lib/logitech_receiver/i18n.py:47
msgid   "device timeout"
msgstr  "upłynął limit czasu dla urządzenia"

#: lib/logitech_receiver/i18n.py:47
msgid   "sequence timeout"
msgstr  "upłynął limit czasu dla sekwencji"

#: lib/logitech_receiver/i18n.py:47
msgid   "too many devices"
msgstr  "za dużo urządzeń"

#: lib/logitech_receiver/i18n.py:50
msgid   "Bootloader"
msgstr  "Bootloader"

#: lib/logitech_receiver/i18n.py:50 lib/solaar/ui/window.py:528
msgid   "Firmware"
msgstr  "Firmware"

#: lib/logitech_receiver/i18n.py:50
msgid   "Hardware"
msgstr  "Hardware"

#: lib/logitech_receiver/i18n.py:50
msgid   "Other"
msgstr  "Inne"

#: lib/logitech_receiver/notifications.py:67
msgid   "pairing lock is closed"
msgstr  ""

#: lib/logitech_receiver/notifications.py:67
msgid   "pairing lock is open"
msgstr  ""

#: lib/logitech_receiver/notifications.py:150 lib/solaar/ui/notify.py:132
msgid   "unpaired"
msgstr  "nie sparowany"

#: lib/logitech_receiver/notifications.py:195
msgid   "powered on"
msgstr  "włączone"

#: lib/logitech_receiver/receiver.py:107 lib/solaar/ui/window.py:614
msgid   "unknown"
msgstr  "nieznane"

#: lib/logitech_receiver/settings_templates.py:119
msgid   "Smooth Scrolling"
msgstr  "Płynne przewijanie"

#: lib/logitech_receiver/settings_templates.py:120
#: lib/logitech_receiver/settings_templates.py:125
#: lib/logitech_receiver/settings_templates.py:129
msgid   "High-sensitivity mode for vertical scroll with the wheel."
msgstr  "Tryb wysokiej rozdzielczości dla przewijania pionowego\n"
        "przy użyciu kółka myszy."

#: lib/logitech_receiver/settings_templates.py:121
msgid   "HID++ Scrolling"
msgstr  ""

#: lib/logitech_receiver/settings_templates.py:122
msgid   "HID++ mode for vertical scroll with the wheel."
msgstr  ""

#: lib/logitech_receiver/settings_templates.py:124
msgid   "High Resolution Scrolling"
msgstr  ""

#: lib/logitech_receiver/settings_templates.py:126
msgid   "High Resolution Wheel Invert"
msgstr  ""

#: lib/logitech_receiver/settings_templates.py:127
msgid   "High-sensitivity wheel invert mode for vertical scroll."
msgstr  ""

#: lib/logitech_receiver/settings_templates.py:128
msgid   "Wheel Resolution"
msgstr  ""

#: lib/logitech_receiver/settings_templates.py:130
msgid   "Side Scrolling"
msgstr  "Przewijanie na boki"

#: lib/logitech_receiver/settings_templates.py:131
msgid   "When disabled, pushing the wheel sideways sends custom button "
        "events\n"
        "instead of the standard side-scrolling events."
msgstr  "Gdy jest wyłączone to przechylanie kółka myszy wysyła "
        "niestandardowe\n"
        "zdarzenia przycisków zamiast standardowych do przewijania na boki."

#: lib/logitech_receiver/settings_templates.py:133
msgid   "Sensitivity (DPI)"
msgstr  "Czułość (DPI)"

#: lib/logitech_receiver/settings_templates.py:134
msgid   "Sensitivity (Pointer Speed)"
msgstr  ""

#: lib/logitech_receiver/settings_templates.py:135
msgid   "Swap Fx function"
msgstr  "Funkcja Swap Fx"

#: lib/logitech_receiver/settings_templates.py:136
msgid   "When set, the F1..F12 keys will activate their special function,\n"
        "and you must hold the FN key to activate their standard function."
msgstr  "Gdy włączona to po wciśnięciu klawiszy F1..F12 aktywowana zostanie\n"
        "ich funkcja pomocnicza. Aby aktywować standardową funkcję należy\n"
        "przytrzymać klawisz FN."

#: lib/logitech_receiver/settings_templates.py:139
msgid   "When unset, the F1..F12 keys will activate their standard function,\n"
        "and you must hold the FN key to activate their special function."
msgstr  "Gdy wyłączona to po wciśnięciu klawiszy F1..F12 aktywowana zostanie\n"
        "ich standardowa funkcja. Aby aktywować funkcję pomocniczą należy\n"
        "przytrzymać klawisz FN."

#: lib/logitech_receiver/settings_templates.py:141
msgid   "Hand Detection"
msgstr  "Wykrywanie dłoni"

#: lib/logitech_receiver/settings_templates.py:142
msgid   "Turn on illumination when the hands hover over the keyboard."
msgstr  "Włącz podświetlenie gdy dłoń znajdzie się nad klawiaturą."

#: lib/logitech_receiver/settings_templates.py:143
msgid   "Smart Shift"
msgstr  ""

#: lib/logitech_receiver/settings_templates.py:144
msgid   "Automatically switch the mouse wheel between ratchet and freespin "
        "mode.\n"
        "The mouse wheel is always free at 0, and always locked at 50"
msgstr  ""

#: lib/logitech_receiver/status.py:99
msgid   "No paired devices."
msgstr  "Brak sparowanych urządzeń."

#: lib/logitech_receiver/status.py:100 lib/solaar/ui/window.py:569
#, python-format
msgid   "%(count)s paired device."
msgid_plural    "%(count)s paired devices."
msgstr[0]       ""
msgstr[1]       ""
msgstr[2]       ""

#: lib/logitech_receiver/status.py:149
#, python-format
msgid   "Battery: %(level)s"
msgstr  ""

#: lib/logitech_receiver/status.py:151
#, python-format
msgid   "Battery: %(percent)d%%"
msgstr  ""

#: lib/logitech_receiver/status.py:162
#, python-format
msgid   "Lighting: %(level)s lux"
msgstr  ""

#: lib/logitech_receiver/status.py:203
#, python-format
msgid   "Battery: %(level)s (%(status)s)"
msgstr  ""

#: lib/logitech_receiver/status.py:205
#, python-format
msgid   "Battery: %(percent)d%% (%(status)s)"
msgstr  ""

#: lib/solaar/listener.py:96
msgid   "The receiver was unplugged."
msgstr  "Odbiornik został odłączony."

#: lib/solaar/ui/__init__.py:48
msgid   "Permissions error"
msgstr  "Błąd uprawnień"

#: lib/solaar/ui/__init__.py:49
#, fuzzy, python-format
msgid   "Found a Logitech Receiver (%s), but did not have permission to open "
        "it."
msgstr  "Znaleziono odbiornik Logitech (%s), ale nie ma uprawnień do "
        "otworzenia go."

#: lib/solaar/ui/__init__.py:51
msgid   "If you've just installed Solaar, try removing the receiver and "
        "plugging it back in."
msgstr  "Jeżeli właśnie zainstalowałeś Solaar spróbuj odłączyć nadajnik i "
        "podłączyć go ponownie."

#: lib/solaar/ui/__init__.py:53
msgid   "Unpairing failed"
msgstr  "Usunięcie parowania nie powiodło się"

#: lib/solaar/ui/__init__.py:54
#, python-brace-format
msgid   "Failed to unpair %{device} from %{receiver}."
msgstr  "Nie powidło się usunięcie parowania %{device} z %{receiver}."

#: lib/solaar/ui/__init__.py:56
msgid   "The receiver returned an error, with no further details."
msgstr  "Odbiornik zwrócił błąd bez dodatkowych informacji."

#: lib/solaar/ui/about.py:39
msgid   "Shows status of devices connected\n"
        "through wireless Logitech receivers."
msgstr  "Wyświetla status urządzeń podłączonych\n"
        "przez bezprzewodowe odbiorniki Logitech."

#: lib/solaar/ui/about.py:48
msgid   "GUI design"
msgstr  "Projekt GUI"

#: lib/solaar/ui/about.py:49
msgid   "Testing"
msgstr  "Testy"

#: lib/solaar/ui/about.py:54
msgid   "Logitech documentation"
msgstr  "Dokumentacja Logitech"

#: lib/solaar/ui/action.py:68 lib/solaar/ui/window.py:309
msgid   "About"
msgstr  "O"

#: lib/solaar/ui/action.py:95 lib/solaar/ui/action.py:98
#: lib/solaar/ui/window.py:191
msgid   "Unpair"
msgstr  "Usuń parowanie"

#: lib/solaar/ui/config_panel.py:120
msgid   "Working"
msgstr  "Pracuję"

#: lib/solaar/ui/config_panel.py:123
msgid   "Read/write operation failed."
msgstr  "Operacja odczytu/zapisu nie powiodła się."

#: lib/solaar/ui/notify.py:134
msgid   "connected"
msgstr  "podłączony"

#: lib/solaar/ui/notify.py:136 lib/solaar/ui/tray.py:295
#: lib/solaar/ui/tray.py:300 lib/solaar/ui/window.py:650
msgid   "offline"
msgstr  "wyłączony"

#: lib/solaar/ui/pair_window.py:133
msgid   "Pairing failed"
msgstr  "Parowanie nie powiodło się"

#: lib/solaar/ui/pair_window.py:135
msgid   "Make sure your device is within range, and has a decent battery "
        "charge."
msgstr  "Upewnij się, że urządzenie jest w zasięgu i ma naładowane baterie."

#: lib/solaar/ui/pair_window.py:137
msgid   "A new device was detected, but it is not compatible with this "
        "receiver."
msgstr  "Wykryto nowe urządzenie, jednak nie jest ono kompatybilne z tym "
        "odbiornikiem."

#: lib/solaar/ui/pair_window.py:139
#, python-format
msgid   "The receiver only supports %d paired device(s)."
msgstr  "Maksymalna ilość urządzeń do sparowania z tym odbiornikiem: %d"

#: lib/solaar/ui/pair_window.py:141
msgid   "No further details are available about the error."
msgstr  "Brak dodatkowych informacji na temat błędu."

#: lib/solaar/ui/pair_window.py:155
msgid   "Found a new device:"
msgstr  ""

#: lib/solaar/ui/pair_window.py:180
msgid   "The wireless link is not encrypted"
msgstr  "Połączenie nie jest szyfrowane"

#: lib/solaar/ui/pair_window.py:197
#, python-format
msgid   "%(receiver_name)s: pair new device"
msgstr  ""

#: lib/solaar/ui/pair_window.py:205
msgid   "Turn on the device you want to pair."
msgstr  "Włącz urządzenie które chcesz sparować."

#: lib/solaar/ui/pair_window.py:206
msgid   "If the device is already turned on,\n"
        "turn if off and on again."
msgstr  "Jeżeli urządzenie jest już włączone,\n"
        "wyłącz je i włącz ponownie."

#: lib/solaar/ui/tray.py:55
msgid   "No Logitech receiver found"
msgstr  "Nie znaleziono odbiornika Logitech"

#: lib/solaar/ui/tray.py:62
msgid   "Quit"
msgstr  "Wyjdź"

#: lib/solaar/ui/tray.py:279
msgid   "no receiver"
msgstr  "brak odbiornika"

#: lib/solaar/ui/tray.py:298
msgid   "no status"
msgstr  "brak statusu"

#: lib/solaar/ui/window.py:98
msgid   "Scanning"
msgstr  "Wyszukiwanie"

#: lib/solaar/ui/window.py:131
msgid   "Battery"
msgstr  "Bateria"

#: lib/solaar/ui/window.py:134
msgid   "Wireless Link"
msgstr  "Połączenie bezprzewodowe"

#: lib/solaar/ui/window.py:138
msgid   "Lighting"
msgstr  "Podświetlenie"

#: lib/solaar/ui/window.py:167
msgid   "Show Technical Details"
msgstr  "Wyświetl szczegóły techniczne"

#: lib/solaar/ui/window.py:180
msgid   "Pair new device"
msgstr  "Sparuj nowe urządzenie"

#: lib/solaar/ui/window.py:199
msgid   "Select a device"
msgstr  "Wybierz urządzenie"

#: lib/solaar/ui/window.py:501
msgid   "Path"
msgstr  "Ścieżka"

#: lib/solaar/ui/window.py:503
msgid   "USB id"
msgstr  "USB id"

#: lib/solaar/ui/window.py:506 lib/solaar/ui/window.py:508
#: lib/solaar/ui/window.py:520 lib/solaar/ui/window.py:522
msgid   "Serial"
msgstr  "Serial"

#: lib/solaar/ui/window.py:512
msgid   "Index"
msgstr  "Index"

#: lib/solaar/ui/window.py:513
msgid   "Wireless PID"
msgstr  "Wireless PID"

#: lib/solaar/ui/window.py:515
msgid   "Protocol"
msgstr  "Protokół"

#: lib/solaar/ui/window.py:515
msgid   "Unknown"
msgstr  "Nieznany"

#: lib/solaar/ui/window.py:517
#, python-format
msgid   "%(rate)d ms (%(rate_hz)dHz)"
msgstr  ""

#: lib/solaar/ui/window.py:517
msgid   "Polling rate"
msgstr  "Częstotliwość próbkowania"

#: lib/solaar/ui/window.py:532
msgid   "none"
msgstr  "brak"

#: lib/solaar/ui/window.py:533
msgid   "Notifications"
msgstr  "Powiadomienia"

#: lib/solaar/ui/window.py:569
msgid   "No device paired."
msgstr  ""

#: lib/solaar/ui/window.py:572
#, python-format
msgid   "Up to %(max_count)s device can be paired to this receiver."
msgid_plural    "Up to %(max_count)s devices can be paired to this receiver."
msgstr[0]       ""
msgstr[1]       ""
msgstr[2]       ""

#: lib/solaar/ui/window.py:574
msgid   "Only one device can be paired to this receiver."
msgstr  ""

#: lib/solaar/ui/window.py:624 lib/solaar/ui/window.py:809
#, python-format
msgid   "%(battery_percent)d%%"
msgstr  ""

#: lib/solaar/ui/window.py:627
msgid   "charging"
msgstr  "ładowanie"

#: lib/solaar/ui/window.py:629
msgid   "last known"
msgstr  "ostatni znany"

#: lib/solaar/ui/window.py:636
msgid   "not encrypted"
msgstr  "nie szyfrowane"

#: lib/solaar/ui/window.py:638
msgid   "The wireless link between this device and its receiver is not "
        "encrypted.\n"
        "\n"
        "For pointing devices (mice, trackballs, trackpads), this is a minor "
        "security issue.\n"
        "\n"
        "It is, however, a major security issue for text-input devices "
        "(keyboards, numpads),\n"
        "because typed text can be sniffed inconspicuously by 3rd parties "
        "within range."
msgstr  "Połączenie pomiędzy tym urządzeniem i odbiornikiem nie jest "
        "szyfrowane.\n"
        "\n"
        "Dla urządzeń wskazujących (myszki, trackballe, trackpady) nie "
        "stanowi to zagrożenia\n"
        "bezpieczeństwa.\n"
        "\n"
        "Jest to jednak duże zagrożenie dla urządzeń służących do "
        "wprowadzania tekstu\n"
        "(klawiatury, klawiatury numeryczne), gdyż wpisywany tekst może być "
        "podsłuchany\n"
        "przez kogoś będącego w zasięgu."

#: lib/solaar/ui/window.py:645
msgid   "encrypted"
msgstr  "szyfrowane"

#: lib/solaar/ui/window.py:647
msgid   "The wireless link between this device and its receiver is encrypted."
msgstr  "Połączenie bezprzewodowe pomiędzy tym urządzeniem i odbiornikiem "
        "jest szyfrowane."

#: lib/solaar/ui/window.py:660
#, python-format
msgid   "%(light_level)d lux"
msgstr  ""

#: lib/solaar/ui/window.py:807
#, python-format
msgid   "%(battery_level)s"
msgstr  ""

#~ msgid        "Only one device can be paired to this receiver"
#~ msgstr       "Tylko jedno urządzenie może być sparowane z tym odbiornikiem"

#~ msgid        "paired devices"
#~ msgstr       "sparowane urządzenia"

#~ msgid        "Up to %d devices can be paired to this receiver"
#~ msgstr       "Maksymalna ilość urządzeń do sparowania z tym odbiornikiem: "
#~      "%d"

#~ msgid        "No device paired"
#~ msgstr       "Brak sparowanych urządzeń."

#~ msgid        "pair new device"
#~ msgstr       "sparuj nowe urządzenie"

#~ msgid        "Found a new device"
#~ msgstr       "Wykryto nowe urządzenie"

#~ msgid        "lux"
#~ msgstr       "lux"

#~ msgid        " paired devices."
#~ msgstr       " sparowane(-ych) urządzeń."

#~ msgid        "1 paired device."
#~ msgstr       "1 sparowane urządzenie."

#~ msgid        "pairing lock is "
#~ msgstr       "blokada parowania jest "

#~ msgid        "open"
#~ msgstr       "otwarta"

#~ msgid        "closed"
#~ msgstr       "zamknięta"