## Copyright (C) 2012-2013  Daniel Pavel
## Copyright (C) 2014-2024  Solaar Contributors https://pwr-solaar.github.io/Solaar/
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License along
## with this program; if not, write to the Free Software Foundation, Inc.,
## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

from .common import NamedInts

#
# Constants - most of them as defined by the official Logitech HID++ 1.0
# documentation, some of them guessed.
#

DEVICE_KIND = NamedInts(
    unknown=0x00,
    keyboard=0x01,
    mouse=0x02,
    numpad=0x03,
    presenter=0x04,
    remote=0x07,
    trackball=0x08,
    touchpad=0x09,
    tablet=0x0A,
    gamepad=0x0B,
    joystick=0x0C,
    headset=0x0D,  # not from Logitech documentation
    remote_control=0x0E,  # for compatibility with HID++ 2.0
    receiver=0x0F,  # for compatibility with HID++ 2.0
)

POWER_SWITCH_LOCATION = NamedInts(
    base=0x01,
    top_case=0x02,
    edge_of_top_right_corner=0x03,
    top_left_corner=0x05,
    bottom_left_corner=0x06,
    top_right_corner=0x07,
    bottom_right_corner=0x08,
    top_edge=0x09,
    right_edge=0x0A,
    left_edge=0x0B,
    bottom_edge=0x0C,
)

# Some flags are used both by devices and receivers. The Logitech documentation
# mentions that the first and last (third) byte are used for devices while the
# second is used for the receiver. In practise, the second byte is also used for
# some device-specific notifications (keyboard illumination level). Do not
# simply set all notification bits if the software does not support it. For
# example, enabling keyboard_sleep_raw makes the Sleep key a no-operation unless
# the software is updated to handle that event.
# Observations:
# - wireless and software present were seen on receivers, reserved_r1b4 as well
# - the rest work only on devices as far as we can tell right now
# In the future would be useful to have separate enums for receiver and device notification flags,
# but right now we don't know enough.
# additional flags taken from https://drive.google.com/file/d/0BxbRzx7vEV7eNDBheWY0UHM5dEU/view?usp=sharing
NOTIFICATION_FLAG = NamedInts(
    numpad_numerical_keys=0x800000,
    f_lock_status=0x400000,
    roller_H=0x200000,
    battery_status=0x100000,  # send battery charge notifications (0x07 or 0x0D)
    mouse_extra_buttons=0x080000,
    roller_V=0x040000,
    keyboard_sleep_raw=0x020000,  # system control keys such as Sleep
    keyboard_multimedia_raw=0x010000,  # consumer controls such as Mute and Calculator
    # reserved_r1b4=        0x001000,  # unknown, seen on a unifying receiver
    reserved5=0x008000,
    reserved4=0x004000,
    reserved3=0x002000,
    reserved2=0x001000,
    software_present=0x000800,  # .. no idea
    reserved1=0x000400,
    keyboard_illumination=0x000200,  # illumination brightness level changes (by pressing keys)
    wireless=0x000100,  # notify when the device wireless goes on/off-line
    mx_air_3d_gesture=0x000001,
)

ERROR = NamedInts(
    invalid_SubID__command=0x01,
    invalid_address=0x02,
    invalid_value=0x03,
    connection_request_failed=0x04,
    too_many_devices=0x05,
    already_exists=0x06,
    busy=0x07,
    unknown_device=0x08,
    resource_error=0x09,
    request_unavailable=0x0A,
    unsupported_parameter_value=0x0B,
    wrong_pin_code=0x0C,
)

PAIRING_ERRORS = NamedInts(device_timeout=0x01, device_not_supported=0x02, too_many_devices=0x03, sequence_timeout=0x06)
BOLT_PAIRING_ERRORS = NamedInts(device_timeout=0x01, failed=0x02)
"""Known registers.
Devices usually have a (small) sub-set of these. Some registers are only
applicable to certain device kinds (e.g. smooth_scroll only applies to mice."""
REGISTERS = NamedInts(
    # only apply to receivers
    receiver_connection=0x02,
    receiver_pairing=0xB2,
    devices_activity=0x2B3,
    receiver_info=0x2B5,
    bolt_device_discovery=0xC0,
    bolt_pairing=0x2C1,
    bolt_uniqueId=0x02FB,
    # only apply to devices
    mouse_button_flags=0x01,
    keyboard_hand_detection=0x01,
    battery_status=0x07,
    keyboard_fn_swap=0x09,
    battery_charge=0x0D,
    keyboard_illumination=0x17,
    three_leds=0x51,
    mouse_dpi=0x63,
    # apply to both
    notifications=0x00,
    firmware=0xF1,
    # notifications
    passkey_request_notification=0x4D,
    passkey_pressed_notification=0x4E,
    device_discovery_notification=0x4F,
    discovery_status_notification=0x53,
    pairing_status_notification=0x54,
)
# Subregisters for receiver_info register
INFO_SUBREGISTERS = NamedInts(
    serial_number=0x01,  # not found on many receivers
    fw_version=0x02,
    receiver_information=0x03,
    pairing_information=0x20,  # 0x2N, by connected device
    extended_pairing_information=0x30,  # 0x3N, by connected device
    device_name=0x40,  # 0x4N, by connected device
    bolt_pairing_information=0x50,  # 0x5N, by connected device
    bolt_device_name=0x60,  # 0x6N01, by connected device,
)

# Flags taken from https://drive.google.com/file/d/0BxbRzx7vEV7eNDBheWY0UHM5dEU/view?usp=sharing
DEVICE_FEATURES = NamedInts(
    reserved1=0x010000,
    special_buttons=0x020000,
    enhanced_key_usage=0x040000,
    fast_fw_rev=0x080000,
    reserved2=0x100000,
    reserved3=0x200000,
    scroll_accel=0x400000,
    buttons_control_resolution=0x800000,
    inhibit_lock_key_sound=0x000001,
    reserved4=0x000002,
    mx_air_3d_engine=0x000004,
    host_control_leds=0x000008,
    reserved5=0x000010,
    reserved6=0x000020,
    reserved7=0x000040,
    reserved8=0x000080,
)