Update README.md

Updated to reflect the resent default/no-default and profile changes.

README.md

@@ -5,42 +5,55 @@ Pre-built ISO's can be found here: https://hvornum.se/archiso/
 
 # Autorun on Arch Live CD (Unattended install)
 
+We'll need to reconfigure the live ISO medium. To do so, we need to add some packages to `packages.x86_64` and add some commands to `customize_airootfs.sh`.
+
     # cd ~/archlive
-    # echo -e "git\npython-psutil" >> packages.both
+    # echo -e "git\npython\npython-psutil" >> packages.x86_64
     # cat <<EOF >> ./airootfs/root/customize_airootfs.sh
     cd /root
     git clone https://github.com/Torxed/archinstall.git
     chmod +x ~/archinstall/archinstall.py
     EOF
     # mkdir ./airootfs/etc/skel
-    # echo '[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && sh -c "~/archinstall/archinstall.py"' >> ./airootfs/etc/skel/.zprofile
-    
-    # rm -v work*; ./build.sh -v
+    # echo '[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && sh -c "~/archinstall/archinstall.py --default"' >> ./airootfs/etc/skel/.zprofile
+
 > Note: `~/archlive` might be different on your system, see [ArchISO#Setup](https://wiki.archlinux.org/index.php/archiso#Setup) for more info.
 
+After all those commands are done, you can go ahead and run:
+
+    # rm -v work*; ./build.sh -v
+
 Whenever this live-cd boots, from here on now - it'll run `archinstall.py` and attempt to unattendely install a default Arch Linux base OS with `base base-devel` as packages.
-Or - if successfull - a profile was found at [/deployments](https://github.com/Torxed/archinstall/tree/master/deployments) for the machine being installed (MAC-address based lookup).
+Or - if successfull - a MAC-address matches a profile at [/deployments](https://github.com/Torxed/archinstall/tree/master/deployments) for the machine to be installed.
 
-> CAUTION: If no parameters are given, **it will devour the first disk in your system** (/dev/sda, /dev/nvme0n1 etc).
+> **CAUTION**: If no parameters are given, **it will devour the first disk in your system** (/dev/sda, /dev/nvme0n1 etc).
 
-## Autorun on Arch Live CD (User specified profile)
+## Autorun on Arch Live CD (Unattended profile install)
 
-Everything in the steps above are the same, except for one line that needs to change:
+Everything in the steps above are the same, except for one line that needs to change to look like this:
 
-    # echo '[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && sh -c "~/archinstall/archinstall.py --no-default"' >> ./airootfs/etc/skel/.zprofile
+    # echo '[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && sh -c "~/archinstall/archinstall.py --profile=workstation"' >> ./airootfs/etc/skel/.zprofile
+
+This will unattendely install the [workstation](https://github.com/Torxed/archinstall/blob/master/deployments/workstation.json) profile.
+
+## Autorun on Arch Live CD (User guided installation (DEFAULT))
+
+Change the autostart line to match:
+
+    # echo '[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && sh -c "~/archinstall/archinstall.py"' >> ./airootfs/etc/skel/.zprofile
 
 This will cause the script to halt and ask for a profile to install before proceeding.
-When asked, enter `workstation` for instance - to install based on the workstation template.
+When asked, enter `workstation` for instance - to install based on the [workstation](https://github.com/Torxed/archinstall/blob/master/deployments/workstation.json) template.
 
-> CAUTION: Even if `--no-default` is given, if a MAC-address matches under `/deployments`, that profile will forcefully be installed.
+> **CAUTION**: If a MAC-address matches under `/deployments`, that profile will forcefully be installed and have presidence over any other profile information.
 
 ## Autorun on Arch Live CD (With custom webserver for deployment profiles)
 
-Again, one line differs from the unattended install, change the following line:
+Again, one line differs from the other install methods, change the following line:
 
     # echo '[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && sh -c "~/archinstall/archinstall.py --profiles-path=http://example.com/profiles"' >> ./airootfs/etc/skel/.zprofile
 
-This will cause the script to look at `http://example.com/profiles/<mac>.json` for instructions.
+This will cause the script to look at `http://example.com/profiles/<profile>.json` for instructions.
 
 # Manually run it on a booted Live CD
 
@@ -51,6 +64,7 @@ This will cause the script to look at `http://example.com/profiles/<mac>.json` f
 
     # umount -R /mnt; cryptsetup close /dev/mapper/luksdev
     # python3 ./archinstall/archinstall.py
+    
 > Note: This assumes `--post=stay` is set to avoid instant reboot at the end or if during any time a user pressed `Ctrl-C` and aborted the installation.
 
 # Some parameters you can give it
@@ -66,7 +80,10 @@ This will cause the script to look at `http://example.com/profiles/<mac>.json` f
       (TODO: /boot will take up space from 1MiB - <start>, make sure boot is no larger than 513MiB)
     
     --password=0000 (Default)
-      Which disk password to use, --password="<STDIN>" for prompt of password.
+      Which disk password to use,
+        --password="<STDIN>" for prompt of password
+        --password="<YUBIKEY>" for setting a unique password on the YubiKey and use that as a password
+        (NOTE: This will wipe/replace slot 1 on the YubiKey)
 
     --pwfile=/tmp/diskpw (Default)
       Which file to store the disk encryption password while sending it to cryptsetup
@@ -87,8 +104,11 @@ This will cause the script to look at `http://example.com/profiles/<mac>.json` f
     --post=reboot (Default)
       After a successful install, reboots into the system. Use --post=stay to not reboot.
 
-    --no-default
-      This parameter causes the installation script to halt if no MAC-based profile was found under /deployments
+    --default
+      This parameter causes the installation script to install arch unattended on the first disk
+
+    --profile=<name>
+      For instance, --profile=workstation will install the workstation profile.
 
     --profiles-path=https://example.com/profiles
       Changes the default path the script looks for deployment profiles.