.github/workflows/release.yml

@@ -202,33 +202,6 @@ jobs:
           name: release-artifacts-kwin-steamos-3.8
           path: out/*.tar.gz
 
-  build-kwin-steamos-3_9:
-    needs: check-version-change
-    if: needs.check-version-change.outputs.should-release == 'true'
-    runs-on: ubuntu-latest
-    permissions:
-      contents: read
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          submodules: recursive
-
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
-
-      - name: Build Breezy KWin (steamos-3.9)
-        run: |
-          STEAMOS=3.9 bin/package_kwin
-        env:
-          UA_API_SECRET: ${{ secrets.UA_API_SECRET }}
-
-      - name: Upload artifacts
-        uses: actions/upload-artifact@v4
-        with:
-          name: release-artifacts-kwin-steamos-3.9
-          path: out/*.tar.gz
-
   build-vulkan-x86_64:
     needs: check-version-change
     if: needs.check-version-change.outputs.should-release == 'true'
@@ -264,7 +237,6 @@ jobs:
       - build-gnome-aarch64
       - build-kwin-steamos-3_7
       - build-kwin-steamos-3_8
-      - build-kwin-steamos-3_9
       - build-vulkan-x86_64
     if: needs.check-version-change.outputs.should-release == 'true'
     runs-on: ubuntu-latest

README.md

@@ -16,7 +16,7 @@ There are two installations available. **Note: Don't manually install either of
 
 ## Breezy Desktop
 
-Breezy Desktop is a virtual workspace solution for Linux desktops that use the KDE Plasma 6 or GNOME desktop environments (versions 45 through 50). It supports launching multiple virtual monitors alongside multiple physical monitors.
+Breezy Desktop is a virtual workspace solution for Linux desktops that use the KDE Plasma 6 or GNOME desktop environments (versions 42 through 49). It supports launching multiple virtual monitors alongside multiple physical monitors.
 
 For the best performance, ensure you have the latest graphics drivers installed for your distro.
 
@@ -64,7 +64,7 @@ After setup, you'll have an application called `Breezy Desktop` installed. Launc
 
 ### GNOME Setup
 
-Breezy Desktop has best compatibility with GNOME versions 45 through 50.
+Breezy Desktop has best compatibility with GNOME versions 45 through 49.
 
 **IMPORTANT** - Please read carefully through this list before you get started
 * **Make sure your glasses are in the [supported devices list](https://github.com/wheaney/XRLinuxDriver#supported-devices)** and are on the latest firmware.

VERSION

@@ -1 +1 @@
-2.9.13
+2.9.11

bin/breezy_kwin_setup

@@ -204,7 +204,7 @@ mv breezy_desktop_lib/* breezy_kwin/
 pushd breezy_kwin > /dev/null
 
 # run the setup script that comes with this release
-ARCH="$ARCH" bin/setup $metrics_version
+bin/setup $metrics_version
 
 echo "Deleting temp directory: ${tmp_dir}"
 rm -rf $tmp_dir

kwin/bin/setup

@@ -8,10 +8,6 @@ if [ "$XDG_SESSION_TYPE" != "wayland" ]; then
 fi
 
 install_steamos_shortcuts() {
-  if [[ "${ARCH:-}" != "steamos-3.7" ]]; then
-    return
-  fi
-
   local os_release="/etc/os-release"
   if [[ ! -r "$os_release" ]]; then
     return

kwin/docker-build/Dockerfile.steamos-3.7

@@ -2,7 +2,7 @@
 #    docker buildx build --platform linux/amd64,linux/arm64 -f ./docker-build/Dockerfile.steamos-3.7 -t "breezy-kwin-steamos-3.7" .
 #    docker run --rm -t -v ./:/source -v --platform linux/amd64 "breezy-kwin-steamos-3.7:amd64"
 
-FROM --platform=$TARGETPLATFORM ghcr.io/wheaney/holo-base:3.7.20@sha256:1478200c51b8b287e294de6e98a1ab0fb79333503a5cc5681b58dfd209f17851
+FROM --platform=$TARGETPLATFORM ghcr.io/wheaney/holo-base:3.7.20
 
 ARG TARGETPLATFORM
 ENV STEAMOS=3.7

kwin/docker-build/Dockerfile.steamos-3.8

@@ -2,7 +2,7 @@
 #    docker buildx build --platform linux/amd64,linux/arm64 -f ./docker-build/Dockerfile.steamos-3.8 -t "breezy-kwin-steamos" .
 #    docker run --rm -t -v ./:/source -v --platform linux/amd64 "breezy-kwin-steamos-3.8:amd64"
 
-FROM --platform=$TARGETPLATFORM ghcr.io/wheaney/holo-base:preview-3.8@sha256:a38cdf4ac0e9022ab55c2078381761b444362cfde63e61d988830b0aafb84850
+FROM --platform=$TARGETPLATFORM ghcr.io/wheaney/holo-base:preview-3.8
 
 ARG TARGETPLATFORM
 ENV STEAMOS=3.8

kwin/docker-build/Dockerfile.steamos-3.9

@@ -1,37 +0,0 @@
-# To run the build from the package root:
-#    docker buildx build --platform linux/amd64,linux/arm64 -f ./docker-build/Dockerfile.steamos-3.9 -t "breezy-kwin-steamos" .
-#    docker run --rm -t -v ./:/source -v --platform linux/amd64 "breezy-kwin-steamos-3.9:amd64"
-
-FROM --platform=$TARGETPLATFORM ghcr.io/wheaney/holo-base:main-3.9@sha256:a9e2c59fb1274cf31d544229134e6bc653f050661dd9b64b05795b964468fcbf
-
-ARG TARGETPLATFORM
-ENV STEAMOS=3.9
-RUN echo "SteamOS 3.9 build - target platform: $TARGETPLATFORM"
-
-RUN pacman -Sy --noconfirm --needed \
-    ca-certificates \
-    base-devel \
-    cmake \
-    pkgconf \
-    git \
-    curl \
-    wget \
-    extra-cmake-modules \
-    qt6-base \
-    qt6-declarative \
-    qt6-quick3d \
-    qt6-tools \
-    kconfig \
-    kconfigwidgets \
-    kcoreaddons \
-    kglobalaccel \
-    ki18n \
-    kcmutils \
-    kxmlgui \
-    kwindowsystem \
-    kwin \
- && pacman -Scc --noconfirm
-
-WORKDIR /source
-
-CMD bin/package_kwin_plugin

kwin/docker-build/init.sh

@@ -20,4 +20,3 @@ fi
 echo "Building docker image"
 docker buildx build --platform linux/amd64 -f ./docker-build/Dockerfile.steamos-3.7 -t "breezy-kwin-steamos-3.7:amd64" --load .
 docker buildx build --platform linux/amd64 -f ./docker-build/Dockerfile.steamos-3.8 -t "breezy-kwin-steamos-3.8:amd64" --load .
-docker buildx build --platform linux/amd64 -f ./docker-build/Dockerfile.steamos-3.9 -t "breezy-kwin-steamos-3.9:amd64" --load .

kwin/src/breezydesktopeffect.cpp

@@ -2,7 +2,6 @@
 #include "core/rendertarget.h"
 #include "core/renderviewport.h"
 #include "cursor.h"
-#include "input.h"
 #include "pointer_input.h"
 #include "kcm/shortcuts.h"
 #include "breezydesktopeffect.h"
@@ -1006,28 +1005,10 @@ void BreezyDesktopEffect::warpPointerToOutputCenter(ScreenOutput *output)
     }
     const QRect geometry = output->geometry();
     const QPointF center = geometry.center();
+    Cursors::self()->mouse()->setPos(center);
 
-    bool warped = false;
+    // When warping, we don't have a meaningful previous position; use center for both.
-    if (InputRedirection *inputRedirection = input(); inputRedirection && inputRedirection->supportsPointerWarping()) {
+    evaluateCursorOnScreenState(center, center);
-        inputRedirection->warpPointer(center);
-        warped = true;
-    } else if (auto *mouseCursor = Cursors::self()->mouse(); mouseCursor) {
-        mouseCursor->setPos(center);
-        warped = true;
-    }
-
-    if (!warped) {
-        return;
-    }
-
-    const QPointF newPos = center - effects->cursorImage().hotSpot();
-    const QPointF prevPos = m_cursorPos;
-    if (m_cursorPos != newPos) {
-        m_cursorPos = newPos;
-        Q_EMIT cursorPosChanged();
-    }
-
-    evaluateCursorOnScreenState(prevPos, newPos);
 }
 
 void BreezyDesktopEffect::moveCursorToFocusedDisplay()