## Thinking Path
> - Paperclip manages agents that must write work and report task
outcomes through its API.
> - Local adapters select an execution engine and its permission
settings.
> - A higher ACP Node requirement can make an unchanged installation
lose access to its default engine.
> - The adapter then silently selects CLI, which can change permissions
and block API access.
> - This pull request keeps the engine choice fixed and reports missing
prerequisites before work starts.
> - It also gives explicit Codex CLI runs usable defaults and keeps
managed services on a supported Node runtime.
## Linked Issues or Issue Description
Refs #12215. Related changes: #11792 raised the Node requirement; #13094
addressed separate runner networking behavior. This change fixes the
engine-selection and managed-launcher paths.
**What happened?**
An unchanged agent could switch from ACP to CLI after an upgrade. Codex
CLI then used read-only permissions with networking disabled. The run
could finish without updating its task. Repeated recovery attempts used
the same unavailable setup. Managed updates also skipped the Node check
and did not refresh old launchers.
**Expected behavior**
An unavailable engine must fail with a clear setup error. It must not
silently select another engine. Explicit CLI runs must be able to write
workspace files and call the API unless the operator configures stricter
settings. Managed updates must validate Node and keep child tools on
that runtime.
**Steps to reproduce**
1. Run an ACP-default agent under Node 22 after the ACP minimum rises to
24.11.
2. Leave the engine unset and disable the approval/sandbox bypass.
3. Observe the old adapter select CLI and fail to write task disposition
through the API.
4. Start a managed service with an old launcher and a supervisor PATH
that selects a different Node for child tools.
## What Changed
- Remove automatic engine fallback for Codex, Claude, Gemini, and Kimi.
Check prerequisites for default and explicit ACP selections.
- Return a configuration error with proof that provider work did not
start. Stop automatic continuation retries for this error.
- Enable Codex ACP workspace networking at the actual turn boundary.
Upstream mode presets otherwise force it off even when config.toml
enables it. Preserve explicit network denial and read-only mode.
- Set workspace-write and network access defaults for explicit Codex CLI
runs. Preserve explicit sandbox modes, profiles, and network
restrictions.
- Pin the validated Node directory in managed launcher PATH. Refresh
legacy launchers during installs and npm/Git updates.
- Reject updates on unsupported Node. Keep update checks, dry runs, and
rollback available.
- Synchronize the qualified Codex ACP executable identity across server,
TypeScript runner, Rust runner, and provider-pack launch paths.
- Add regression tests and update engine and installation documentation.
## Verification
- [Full CI passed on the final
head](https://github.com/paperclipai/paperclip/actions/runs/34387099695):
typecheck, build/native runner verification, all general and serialized
test shards, all browser shards, release registry, canary dry run, and
policy checks.
- Greptile: 5/5 on `2c1d6e2815830a5cd39e36c8a082cc0c4441b6c0`, with no
unresolved review findings. Security gates are green.
- Full workspace typecheck and build also passed locally. The final
deployed Linux build passed.
- Full Codex, Claude, Gemini, and Kimi source test suites: 804 passed, 2
skipped. Installer, updater, and launcher tests: 47 passed. Installed
ACP turn-boundary tests: 3 passed. ACP packaging tests: 14 passed.
Focused recovery classification tests also passed.
- Real Linux Codex CLI runs, both fresh and resumed, wrote a workspace
file and reached the control-plane health API with the new defaults.
- Explicit read-only and network-disabled control probes retained those
restrictions.
- A real ACP run on the final deployed Linux build wrote a file and
reached the control-plane API with HTTP 200, without engine fallback.
The same probe failed DNS before the turn-policy patch.
- Executable-identity and installed-policy contracts: 12 passed.
Affected native server tests: 197 passed. Runner factory tests: 21
passed. Rust qualification and native provider integration tests: 11
passed.
- Deployed the production changes to a Linux service on Node 24.20 after
a verified database backup. Health, bootstrap readiness, static UI,
executable/cwd identity, and guarded restart checks passed. The restart
lost no runs.
- Corrected stale Kimi skill-default and Gemini remote-archive fixtures;
both suites pass.
## Risks
- Default or legacy auto engine settings now fail when ACP is
unavailable. Operators who intend to use CLI must select it explicitly.
- Codex CLI now permits workspace writes and networking by default, and
ACP workspace-write turns permit networking by default. Explicit
operator sandbox settings remain authoritative.
- Old managed launchers keep their pinned Node until they are
reinstalled under a supported runtime. An old updater cannot repair
itself; the documentation gives the current installer command.
- Custom service wrappers and global/source installations must configure
their runtime PATH. No database migration is required.
## Model Used
OpenAI Codex, based on GPT-6, with reasoning, repository inspection,
shell execution, and test tools. The exact serving model identifier and
context-window size are not exposed in this session.
## Checklist
- [x] I have included a thinking path that traces from project context
to this change
- [x] I have specified the model used (with version and capability
details)
- [x] I have checked ROADMAP.md and confirmed this PR does not duplicate
planned core work
- [x] I have searched GitHub for duplicate or related PRs and linked
them above
- [x] I have either (a) linked existing issues with `Fixes: #` / `Closes
#` / `Refs #` OR (b) described the issue in-PR following the relevant
issue template
- [x] I have not referenced internal/instance-local Paperclip issues or
links (only public GitHub `#NNN` / `github.com/paperclipai/paperclip`
URLs)
- [x] My branch name describes the change (e.g. `docs/...`, `fix/...`)
and contains no internal Paperclip ticket id or instance-derived details
- [x] I have run tests locally and they pass
- [x] I have added or updated tests where applicable
- [x] I have updated relevant documentation to reflect my changes
- [x] I have considered and documented any risks above
- [x] All Paperclip CI gates are green
- [x] Greptile is 5/5 with no open P2s, recommendations, or follow-ups
- [x] I will address all Greptile and reviewer comments before
requesting merge
---------
Co-authored-by: Paperclip <noreply@paperclip.ing>
## Thinking Path
> - Paperclip is the open source app people use to manage AI agents for
work
> - Local agent adapters (`claude_local`, `gemini_local`, `grok_local`,
…) are the integration surface that lets Paperclip run coding CLIs on
the host machine
> - The Kimi Code CLI (`kimi`, Moonshot AI) has a documented
non-interactive mode, `kimi -p --output-format stream-json` with session
resume via `kimi -r`, but Paperclip has no built-in adapter for it
> - So Kimi users (especially Kimi membership / OAuth subscribers)
cannot onboard their CLI to Paperclip agent teams
> - This pull request adds a complete built-in `kimi_local` adapter
(both execution engines, session management, instructions + skills
delivery, thinking-effort control, environment test, UI and CLI modules,
docs) following the established `gemini_local`/`grok_local` package
pattern
> - Kimi Code ships an ACP server (`kimi acp`), so the adapter runs on
Paperclip's shared acpx engine by default (streaming transcript with
live tool status, like `claude_local`/`gemini_local`) and falls back to
a headless CLI lane (`kimi -p --output-format stream-json`) when ACP
prerequisites are unavailable
> - The benefit is that Kimi Code becomes a first-class Paperclip agent
lane: selectable in the UI, resumable across heartbeats, with the same
operating context (instruction bundle, skills, effort) and streaming
transcript the other local adapters get
## Linked Issues or Issue Description
- Supersedes #9880 (same branch; expanded from the CLI-only lane into a
complete adapter with the default ACP engine lane, control-plane skill
install, and live transcript wiring)
- Refs #9879 (adapter request for Kimi Code CLI, filed with this PR)
- Refs #163 (original Kimi support request)
Duplicate/related prior PRs, per the dedup search (both appear stale: no
updates or maintainer review since May 2026, and both target an older
Kimi CLI interface; calling them out for reviewer context per
CONTRIBUTING.md):
- Refs #6276 (`feat: add kimi-local adapter`): targets an older
array-based content format (`{type: think}`/`{type: text}` blocks), not
the current documented stream-json schema
- Refs #5202 (`feat(adapter): add Kimi CLI local adapter with Wire
protocol support`): builds on a `--wire` JSON-RPC interface that current
Kimi Code CLI (0.27.0) no longer documents; the current documented
headless interface is `-p --output-format stream-json`
This PR is a fresh implementation against current master and the
currently documented/verified Kimi CLI behavior (see Verification).
Happy to fold in anything useful from the earlier attempts if a reviewer
prefers.
## What Changed
- **New adapter package** `packages/adapters/kimi-local`
(`@paperclipai/adapter-kimi-local`), modeled on
`gemini-local`/`grok-local`:
- `src/server/execute.ts`: spawns `kimi -p <prompt> --output-format
stream-json` (argv array, no shell), `-m <model>` only when configured,
`-r <sessionId>` when the stored session cwd matches the run cwd,
automatic fresh-session retry on unrecoverable-session errors,
headless-safe env (`CI=1`, `NO_COLOR=1`, `KIMI_CODE_NO_AUTO_UPDATE=1`,
`TERM=dumb`; user-configured values win), full remote (ssh/sandbox)
execution lane with runtime install via `@moonshot-ai/kimi-code`
- **Instruction bundle delivery**: the prompt path directive now names
the sibling instruction files (`./HEARTBEAT.md`, `./SOUL.md`,
`./TOOLS.md`) alongside the prepended entry file, and local runs pass
`--add-dir <instructions-dir>` so Kimi can actually open them (matching
`claude_local`). Without this, only the entry file reached Kimi and
agents improvised the operating workflow that `HEARTBEAT.md` documents
- **Thinking effort**: a configured `effort` is forwarded as the
`KIMI_MODEL_THINKING_EFFORT` operational override (Kimi has no
per-invocation effort flag). It is only sent for models that advertise
`support_efforts` (currently `kimi-code/k3`) to avoid provider
rejections, and `medium` maps to `high` since Kimi has no medium tier
(`low`/`high`/`max` pass through)
- **Skills delivery**: desired Paperclip skills are delivered via Kimi's
`--skills-dir` flag from a dedicated per-run directory (a local
snapshot, or the synced snapshot on remote targets), so skills load
reliably and in isolation. Paperclip never overwrites the shared
`$KIMI_CODE_HOME/skills` home, so skills installed by the operator or
other agents are left intact. `--skills-dir` is only passed when at
least one skill is desired, so unconfigured agents keep Kimi's default
skill discovery
- **Live run status**: the adapter now forwards each streamed
stream-json line to `onEvent` (assistant `content` as an assistant
snippet, `tool_calls` as tool-name events), which drives the
issue-thread activity indicator (`currentToolName` /
`lastAssistantSnippet` / `lastEventAt`). Previously the adapter only
wrote the raw run log, so the issue thread showed a stale "no output for
N s" line with no tool or reasoning context while Kimi worked. Tool
results are omitted so the last meaningful "Using X" / snippet is not
overwritten by a generic label
- `src/server/parse.ts`: parses the verified Kimi stream-json event
shapes (`assistant` text, `assistant.tool_calls` with JSON-string
arguments, `tool` results, trailing `meta.session.resume_hint` for
session-id capture) plus failure classifiers (`kimi_auth_required`,
transient network, unrecoverable session). A signaled exit (null exit
code, not a timeout) is now reported as a failure rather than coalesced
to success, and the error message names the terminating signal
- `src/server/skills.ts`: lists/syncs Paperclip skills for the adapter's
skill-management surface
- `src/server/test.ts`: environment test covering CLI resolution + `kimi
--version`, cwd check, auth detection (OAuth credential dirs, keyed
`[providers.*]` in config.toml, or the `KIMI_MODEL_NAME` +
`KIMI_MODEL_API_KEY` env pair), and a live hello probe
- `src/ui/` (stdout-line parser for transcripts, config builder) and
`src/cli/` (stream event formatter) modules
- Root metadata: three managed model aliases
(`kimi-code/kimi-for-coding`, `kimi-code/kimi-for-coding-highspeed`,
`kimi-code/k3`), effort-capable-model metadata (`EFFORT_CAPABLE_MODELS`,
effort mapping helpers), `agentConfigurationDoc`
- Tests: 101 tests across parse, execute (args building, resume gating,
retry, auth error code, timeout, signaled-exit failure, effort
forwarding/gating/mapping, `--add-dir` instructions directive,
`--skills-dir` gating, `onEvent` runtime-event forwarding), ACP engine
(engine resolution, acpx config build, node-version gate), ACP
transcript delegation, environment test, UI parse/build-config
- **ACP engine lane (default)** (`src/server/acp.ts` + shared
`adapter-utils/acpx-engine`): Kimi Code ships an ACP server (`kimi
acp`), so `kimi_local` now runs on Paperclip's shared acpx engine by
default, matching `claude_local`/`codex_local`/`gemini_local`. The
issue-thread transcript streams live (assistant text deltas, tool calls
with a `pending`->`completed` status lifecycle) instead of the CLI
lane's bursty complete-message output. Registered `kimi_local -> "kimi"`
in `ACPX_ADAPTER_AGENT_IDS` and resolved the built-in agent command to
`kimi acp`; `execute.ts` dispatches to the ACP executor first with an
automatic CLI fallback when ACP prerequisites fail (`engine=acp`
requires ACP, `engine=cli` pins the headless lane); `index.ts` falls
back to the shared acpx session codec; the UI/CLI delegate `acpx.*`
events to the shared acpx transcript parser and event formatter. The
headless CLI lane (above) remains as the fallback
- **Registration** (one entry each, mirroring existing adapters): server
adapter registry + `BUILTIN_ADAPTER_TYPES`, `AGENT_ADAPTER_TYPES`
(shared), UI adapter registry + display registry (`Kimi Code`, Moon
icon) + capabilities defaults, CLI adapter registry, `Dockerfile`
(package copy + `npm install --global @moonshot-ai/kimi-code@latest`),
`vitest.config.ts` workspace, `scripts/release-package-manifest.json`
- **Behavioral sets** mirroring `gemini_local` (Kimi resumes sessions
the same way): `GIT_SENSITIVE_LOCAL_ADAPTER_TYPES`,
`SESSIONED_LOCAL_ADAPTERS` (heartbeat + recovery),
`REMOTE_MANAGED_ADAPTERS`, ssh/sandbox execution-target allow-lists,
`ADAPTER_DEFAULT_RULES_BY_TYPE` (`timeoutSec: 0`, `graceSec: 15`), and
`LEGACY_SESSIONED_ADAPTER_TYPES` + `ADAPTER_SESSION_MANAGEMENT` in
adapter-utils
- **UI touch-points**: New Agent default-model branch, AgentConfigForm
command map (`kimi_local: "kimi"`) + model defaults + a Kimi-specific
thinking-effort option list (`Low`/`High`/`Max`, reflecting Kimi's tiers
rather than borrowing Claude's), OnboardingWizard (command map, model
default, `kimi login` / `KIMI_MODEL_NAME + KIMI_MODEL_API_KEY` auth
hints, manual-debug command line), InviteLanding enabled adapters
- **Control-plane skill install** (`cli/src/commands/client/agent.ts`):
`paperclipai agent local-cli` seeded the Paperclip control-plane skills
into `~/.codex/skills` and `~/.claude/skills` so Codex/Claude agents
auto-discover the API reference every run. Kimi had no equivalent
target, so `kimi_local` agents began each session without the
control-plane skill and rediscovered routes (e.g. the company-scoped
`POST /api/companies/{companyId}/issues`) by trial and error. Added
`~/.kimi-code/skills` (honoring `KIMI_CODE_HOME`) as a third install
target for parity. Independent of the per-run `--skills-dir` delivery,
which only applies to explicitly configured skills.
- **Docs**: `docs/adapters/kimi-local.md` (prerequisites, auth options,
config fields including `effort`, session resume, instruction bundle,
skills delivery, control-plane skill install) + a row in
`docs/adapters/overview.md`
Out of scope (deliberately): model profiles, built-in agent
`allowedAdapterTypes` additions.
## Verification\n\nCurrent-master rebase verification (OpenAI Codex,
2026-08-03): 13 focused files / 231 tests pass; adapter-utils, server,
UI, CLI, and Kimi adapter typechecks pass; full repository build and UI
token gates pass. The branch is conflict-free against master at head
`1249df117c5e12e5771b9a570a6340866450619e`.\n\nAutomated (all from repo
root, pnpm 9.15.4, Node 22):
- `vitest run packages/adapters/kimi-local`: 89/89 pass (includes
coverage for the instruction `--add-dir` directive, effort
forwarding/gating/mapping, `--skills-dir` gating, the signaled-exit
failure path, and `onEvent` runtime-event forwarding with cross-chunk
line buffering)
- `vitest run server/src/__tests__/adapter-registry.test.ts
server/src/__tests__/adapter-routes.test.ts
server/src/services/heartbeat-stop-metadata.test.ts
ui/src/adapters/adapter-display-registry.test.ts`: 37/37 pass
- `vitest run cli/src/__tests__/skills.test.ts`: 13/13 pass (the
control-plane skill install target follows the existing Codex/Claude
install path, whose symlink logic is unchanged)
- `vitest run packages/shared`: 307/307 pass; `vitest run
packages/adapter-utils`: pass except one pre-existing, unrelated failure
(`mcp-isolation.integration.test.ts` requires Claude CLI ≥ 2.1.207; host
has 2.1.185, fails identically on unmodified master)
- `pnpm --filter @paperclipai/adapter-kimi-local typecheck|build`, plus
typecheck of `server`, `ui`, `cli`, `adapter-utils`: all clean
- `pnpm install --frozen-lockfile`: passes (the PR diff itself contains
no lockfile changes, per repo policy; verified against a locally
regenerated lockfile)
- `node scripts/check-no-git-push.mjs` and `node
scripts/check-forbidden-tokens.mjs`: pass
- CI note: the `policy` job's release-bootstrap step is expected to stay
red until a maintainer bootstraps the first npm publish of
`@paperclipai/adapter-kimi-local`; see the CI Note for Maintainers
comment. All other contributor-actionable checks are green.
Manual end-to-end (real Kimi CLI 0.27.0, OAuth login, dev server on an
isolated instance):
1. Server `GET /api/adapters` lists `kimi_local` as builtin with correct
capability flags; models endpoint returns the three Kimi models
2. `POST .../adapters/kimi_local/test-environment`: all checks pass,
including a live `kimi -p` hello probe
3. Created a `kimi_local` agent and invoked two heartbeats: run 1
spawned `kimi -p ... --output-format stream-json`, Kimi used its `Read`
tool, produced the expected answer, and the session id was captured from
the `session.resume_hint` meta event; run 2 resumed the **same** Kimi
session (`sessionIdBefore == sessionIdAfter`) via `-r`
4. UI: adapter appears in the New Agent dropdown; selecting it shows the
Kimi command placeholder, the three models, and the Kimi config fields;
the run transcript renders Kimi tool calls via the adapter's stdout
parser
The instruction-bundle, thinking-effort, and `--skills-dir` changes
landed after the manual run above. They are covered by the unit tests
listed under Automated, and the Kimi CLI flags they rely on
(`--add-dir`, `--skills-dir`, `KIMI_MODEL_THINKING_EFFORT`) were
confirmed against the installed Kimi Code CLI 0.27.0 (`kimi --help`,
config-file thinking-effort docs).
Screenshots (assets branch on the fork, not part of the diff):
## Risks
- Low risk to existing behavior: the change is additive, one new
workspace package plus single-entry registrations alongside existing
adapters; no existing adapter code paths are modified.
- The adapter invokes the locally installed `kimi` CLI; like other local
adapters, run behavior depends on the host's Kimi version. The parser is
written against the documented/verified 0.27.0 stream-json schema and
degrades gracefully (malformed lines are skipped, failures surface as
run errors).
- `--skills-dir` overrides Kimi's auto-discovery of user and project
skills for the run. This is intentional (paperclip-managed agents get a
reproducible, isolated skill set), and it is only passed when at least
one Paperclip skill is desired, so unconfigured agents keep default
discovery.
- Thinking effort is only forwarded to models that advertise
`support_efforts` (currently `kimi-code/k3`); `EFFORT_CAPABLE_MODELS`
must be extended when more Kimi models gain support, otherwise a
configured effort is silently ignored for them.
- `Dockerfile` now installs `@moonshot-ai/kimi-code@latest` globally
alongside the other agent CLIs, so image size increases slightly.
- Maintainer action needed for the npm bootstrap gate: the `policy`
job's release-bootstrap step fails until the first npm publish of
`@paperclipai/adapter-kimi-local` (the gate from #5146 that every new
adapter package has passed through). Enrollment with `publishFromCi:
true` is required by the manifest validator (dropping the entry,
`false`, or `private` are all rejected), so this is intentionally left
to a maintainer. Remaining CI lanes are expected to run once it is done.
## Model Used\n\n- **Current-master rebase, conflict adaptation, and
registry-parity coverage:** OpenAI, **GPT-5 Codex** (Codex agent; exact
serving model ID and context-window size were not exposed to the
runtime), with repository, shell, Git, and GitHub tooling. It preserved
Hawik’s commit authorship, reconciled ACPX and environment-capability
changes, added current registry tests, and ran the verification
above.\n- **Adapter implementation and initial review:** Moonshot AI,
**Kimi K3 Coding** (latest), via **Kimi Code CLI v0.27.0**
(`kimi-code/k3` alias, 1M-token context window, thinking mode, agentic
tool use). The CLI agent explored the repo, wrote the adapter
implementation (delegated to a coder sub-agent of the same model), ran
tests, and drafted the first version of this PR body. A second
model-driven review pass (read-only, same model) audited the diff for
security/correctness before submission; its findings (shell-quoting
hardening, auth-detection false positive, session-compaction
registration, test gaps) were fixed and are included.
- **Harness-context fixes and review responses:** Anthropic, **Claude
Opus 4.8** (`claude-opus-4-8`) via Claude Code. Diagnosed from run logs
that Kimi received only the entry instructions file (not the
`HEARTBEAT.md`/`SOUL.md`/`TOOLS.md` bundle) and that `effort` was never
wired, then implemented the instruction `--add-dir` delivery,
`KIMI_MODEL_THINKING_EFFORT` forwarding, and `--skills-dir` skill
delivery, added the accompanying tests and docs, and addressed the
automated review comments (preserving external skills on remote sync,
treating a signaled exit as a failure). Also extended the `paperclipai
agent local-cli` installer to seed the control-plane skills into
`~/.kimi-code/skills` for Codex/Claude parity, wired `onEvent` runtime
events so the issue-thread activity indicator reflects Kimi's tool and
reasoning output live, and built the ACP engine lane (`kimi acp` via the
shared acpx engine, default) so the transcript streams with live tool
status like the other ACP adapters. The Kimi CLI flags, subcommand, and
env var relied on here were verified against the installed Kimi Code CLI
0.27.0.
- All CLI behaviors claimed here (`-p`, `--output-format stream-json`,
`-r` resume, event shapes, `--add-dir`, `--skills-dir`,
`KIMI_MODEL_THINKING_EFFORT`) were verified empirically against the
installed Kimi CLI, not assumed.
## Checklist
- [x] I have included a thinking path that traces from project context
to this change
- [x] I have specified the model used (with version and capability
details)
- [x] I have checked ROADMAP.md and confirmed this PR does not duplicate
planned core work
- [x] I have searched GitHub for duplicate or related PRs and linked
them above
- [x] I have either (a) linked existing issues with `Fixes: #` / `Closes
#` / `Refs #` OR (b) described the issue in-PR following the relevant
issue template
- [x] I have not referenced internal/instance-local Paperclip issues or
links (only public GitHub `#NNN` / `github.com/paperclipai/paperclip`
URLs)
- [x] My branch name describes the change (e.g. `docs/...`, `fix/...`)
and contains no internal Paperclip ticket id or instance-derived details
- [x] I have run tests locally and they pass
- [x] I have added or updated tests where applicable
- [x] I have updated relevant documentation to reflect my changes
- [x] I have considered and documented any risks above
- [x] All Paperclip CI gates are green *(only the release-bootstrap step
remains red, pending the maintainer npm publish described in Risks)*
- [x] Greptile is 5/5 with no open P2s, recommendations, or follow-ups
*(will address all Greptile comments as they arrive)*
- [x] I will address all Greptile and reviewer comments before
requesting merge
---
## Maintainer Addendum (2026-08-20)
The shared acpx-engine and issue-chat changes (run-summary segmentation,
placeholder tool-event coalescing,
`ISSUE_CHAT_TRANSCRIPT_MAX_VISIBLE_ENTRIES` 30 → 400, live-reasoning UI)
have been **extracted to #11761** so the cross-adapter behavior changes
review and revert independently — both commits there preserve @hawikk's
authorship. This PR is now the kimi-specific adapter only (60 files,
+3,793/−8, essentially pure addition); the only shared-engine touch left
is the `kimi acp` command resolution. `publishFromCi` is `true` — the
package name is bootstrapped on npm.
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
Co-authored-by: Paperclip <noreply@paperclip.ing>
Co-authored-by: Dotta <bippadotta@protonmail.com>
Co-authored-by: Devin Foley <devin@paperclip.ing>
## Thinking Path
> - Paperclip is the open source app people use to manage AI agents for
work
> - The claude_local adapter runs Claude Code on sandbox execution
targets, and operators verify an agent's configuration with the
test-environment probe before running it
> - Real runs merge the selected environment's env vars (secret refs
included) under the agent's adapter config env, but the probe built its
config from the adapter config alone — so environment-level auth worked
in runs while the Test button reported missing auth, and a dropped
secret binding passed silently
> - The claude env-test hints also did not recognize
`CLAUDE_CODE_OAUTH_TOKEN` even though the CLI accepts it, and a hello
probe that hit the subscription usage limit reported a hard failure
although authentication worked
> - Separately, the claude-local package test suites were absent from
the CI project list, so two suites drifted broken without notice
> - This pull request makes the probe resolve the same layered env as a
real run, adds the missing auth hint, classifies usage-limit probe
results as a warning, repairs the drifted suites, and turns the
claude-local project on in CI
> - The benefit is a Test button that tells the truth about
environment-level configuration, and a test suite that actually gates
the claude-local adapter
## Linked Issues or Issue Description
No public issue exists; related open PRs: Refs #9488 (recognizes
CLAUDE_CODE_OAUTH_TOKEN in environment checks — overlaps with the
auth-hint portion of this PR via a differently named check; it does not
cover the environment-envVars probe merge, the usage-limit
classification, or the CI coverage), Refs #9933 (live credential
validation in environment checks — complementary, no file-level conflict
with the route change).
The underlying problem, following the enhancement template:
**Current behavior**
The test-environment route builds the probe config from the agent's
adapterConfig only. Real runs merge the selected environment's envVars
under the agent env, so environment-level env vars (including auth such
as `ANTHROPIC_API_KEY` or `CLAUDE_CODE_OAUTH_TOKEN` bound as environment
secrets) work in runs while "Test environment" cannot see them, and a
missing secret binding passes silently. The claude env-test hints do not
recognize `CLAUDE_CODE_OAUTH_TOKEN`. A hello probe that hits the
subscription usage limit reports a hard `claude_hello_probe_failed`. The
claude-local package test suites do not run in CI, and two of them are
stale.
**Proposed behavior**
The probe resolves the selected environment's envVars
(environment-consumer secret bindings included) and merges them under
the agent config env with the run-path precedence; missing bindings
surface as an explicit error check that fails the test. The env-test
emits a `claude_oauth_token_configured` info check when that variable is
set. Usage-limit probe results classify as a
`claude_hello_probe_usage_limited` warning because auth works and only
the usage window is spent. The claude-local suites run in CI. Docs state
the resulting facts.
**Reason and benefit**
The Test button should tell the truth: it previously contradicted run
behavior for environment-level configuration and hid broken secret
bindings. Enabling the package suites in CI prevents further silent
drift — two suites were already broken on master without anyone
noticing.
**Breaking changes**
None. Runs are unchanged. The probe route only adds env layers and
checks; setups without environment envVars behave exactly as before.
## What Changed
- `server/src/routes/agents.ts`: the test-environment route resolves the
selected environment's envVars (forbidden keys stripped,
environment-consumer secret context) and merges them under the agent
adapterConfig env, mirroring `resolveExecutionRunAdapterConfig`
precedence. Missing secret bindings are skipped, reported as an
`environment_env_binding_missing` error check, and fail the test —
matching the `ConfigurationIncompleteFailure` a real dispatch would
raise.
- `packages/adapters/claude-local/src/server/test.ts`: new
`claude_oauth_token_configured` info hint between the API-key warning
and the subscription fallback; hello-probe classification gains a
`claude_hello_probe_usage_limited` warning for provider-quota results
(previously a hard `claude_hello_probe_failed`).
- `scripts/run-vitest-stable.mjs`: add
`@paperclipai/adapter-claude-local` to `nonServerProjects` so CI runs
the package suites.
- `packages/adapters/claude-local/src/server/execute.remote.test.ts`:
assert both runtime asset syncs (skills and mcp-config); the suite
predated the mcp-config asset.
- `packages/adapters/claude-local/src/server/test.probe.test.ts`:
usage-limit fixture now expects the usage-limited warning; new fixture
covers the genuine transient path (529 overloaded); new tests cover the
token hint and API-key precedence.
- `server/src/__tests__/agent-test-environment-routes.test.ts`: new
tests for the env merge (agent wins on conflict, forbidden key
filtered), missing-binding reporting, and the no-execution-target
fallback path.
- `docs/adapters/claude-local.md`, `docs/adapters/overview.md`: state
the auth-input facts (API key or oauth token wins over stored logins;
snapshot-owns-auth applies when neither is configured) and describe the
environment-aware Test behavior.
## Verification
- `npx vitest run --project @paperclipai/adapter-claude-local` — 131
tests pass (both drifted suites repaired; they fail on master today).
- `npx vitest run
server/src/__tests__/agent-test-environment-routes.test.ts` — 7 tests
pass.
- `node --test ./scripts/__tests__/run-vitest-stable-shard.test.mjs` —
passes with the added project.
- `pnpm typecheck` in `server/` and `packages/adapters/claude-local/` —
clean.
## Risks
- Low risk. The run path is untouched; the probe route change is
additive and inert when the environment has no envVars.
- The probe now performs environment-consumer secret resolution at test
time; access is authorized per binding exactly as at run time, and the
audit consumer is the environment (as before for adapter-config
resolution).
- Enabling the claude-local project in CI adds about 2 seconds of vitest
wall time to the general workspaces group and could surface future
regressions in that package — which is the point.
## Model Used
Claude Fable 5 (`claude-fable-5`), extended thinking enabled, agentic
tool use via Claude Code (CLI).
## Checklist
- [x] I have included a thinking path that traces from project context
to this change
- [x] I have specified the model used (with version and capability
details)
- [x] I have checked ROADMAP.md and confirmed this PR does not duplicate
planned core work
- [x] I have searched GitHub for duplicate or related PRs and linked
them above
- [x] I have either (a) linked existing issues with `Fixes: #` / `Closes
#` / `Refs #` OR (b) described the issue in-PR following the relevant
issue template
- [x] I have not referenced internal/instance-local Paperclip issues or
links (only public GitHub `#NNN` / `github.com/paperclipai/paperclip`
URLs)
- [x] My branch name describes the change (e.g. `docs/...`, `fix/...`)
and contains no internal Paperclip ticket id or instance-derived details
- [x] I have run tests locally and they pass
- [x] I have added or updated tests where applicable
- [x] I have updated relevant documentation to reflect my changes
- [x] I have considered and documented any risks above
- [ ] All Paperclip CI gates are green
- [ ] Greptile is 5/5 with no open P2s, recommendations, or follow-ups
- [x] I will address all Greptile and reviewer comments before
requesting merge
## Thinking Path
> - Paperclip is the open source app people use to manage AI agents for
work.
> - Adapter packages are the bridge between the control plane and local
agent harnesses such as Claude Code, Codex, and Gemini CLI.
> - ACP support was concentrated in a separate `acpx_local` adapter,
which made ACP feel like a separate agent choice instead of an execution
capability of the harness adapters.
> - Claude, Codex, and Gemini now have ACP-capable harnesses, so the
native adapter should own ACP selection, fallback, config, transcript
parsing, and environment diagnostics.
> - The standalone ACPX adapter still needs a compatibility path for
existing rows, but it should not be offered as an active adapter for new
agents.
> - This pull request moves the shared ACP runtime into
`@paperclipai/acpx-engine`, wires Claude/Codex/Gemini local adapters to
prefer ACP when prerequisites are available, and retires `acpx_local` to
a tombstone.
> - The benefit is one adapter per harness, richer ACP transcripts by
default where possible, and a migration path for existing Claude/Codex
ACPX agents.
## Linked Issues or Issue Description
Closes#5932 — the broken default `acpx_local` Claude path is replaced
by native `claude_local` ACP support, existing Claude/Codex ACPX rows
migrate to native adapters, and new agents no longer choose the
standalone ACPX adapter.
Refs #4893 — original merged ACPX local adapter runtime that this PR
replaces with native per-harness ACP engines.
Refs #6590 — prior ACPX-Claude seamlessness work folded into the new
native Claude ACP path.
Refs #197 — related open generic ACP/Kiro adapter work; this PR does not
close it because Kiro/custom generic ACP remains a separate adapter
decision.
Refs #7018 — related Kimi-specific `acpx_local` shell failure; this PR
retires the built-in standalone adapter but does not add a native Kimi
adapter.
Refs #8864 — related ACPX prompt/API guidance PR; this PR moves runtime
guidance into the shared/native ACP engine path instead of the old
standalone adapter.
Refs #8881 — related `acpx_local` POSIX shell failure from the old
`acpx` pin; this PR updates ACP dependencies but does not claim
custom/OMP ACP support as a first-class native adapter.
Refs #8964 — related open `acpx_local` stderr cleanup PR; this PR makes
the old runtime path obsolete for new agents but keeps it as a
non-closing reference.
Problem description:
- The standalone `acpx_local` adapter duplicates Claude/Codex agent
choices that already have first-class local adapters.
- ACP should be an execution engine capability of each harness adapter
when the underlying harness supports ACP.
- Existing `acpx_local` agents should either migrate to native harness
adapters or fail with an explicit retirement message instead of silently
falling back to the process adapter.
## What Changed
- Added `@paperclipai/acpx-engine` as the shared ACP execution,
session-codec, CLI formatter, and UI parser package.
- Wired `claude_local`, `codex_local`, and `gemini_local` to auto-select
ACP by default when prerequisites pass, with `engine=cli` opt-out and
`engine=acp` strict mode.
- Added ACP config schema/UI fields, environment checks, session-codec
preservation, transcript parsing, and adapter capability metadata for
the native adapters.
- Retired `acpx_local` to a server tombstone, removed its
UI/package/runtime image surface, and added a migration for existing
Claude/Codex ACPX agents.
- Updated package manifests, lockfile, release tooling, docs, Kubernetes
sandbox defaults, and tests.
## Verification
- `corepack pnpm --filter @paperclipai/acpx-engine typecheck`
- `corepack pnpm --filter @paperclipai/adapter-claude-local typecheck`
- `corepack pnpm --filter @paperclipai/adapter-codex-local typecheck`
- `corepack pnpm --filter @paperclipai/adapter-gemini-local typecheck`
- `corepack pnpm --filter @paperclipai/acpx-engine exec vitest run`
- `corepack pnpm --filter @paperclipai/adapter-claude-local exec vitest
run src/server/acp.test.ts src/server/execute.acp-fallback.test.ts
src/ui/build-config.test.ts`
- `corepack pnpm --filter @paperclipai/adapter-codex-local exec vitest
run src/server/acp.test.ts src/ui/build-config.test.ts`
- `corepack pnpm --filter @paperclipai/adapter-gemini-local exec vitest
run src/server/acp.test.ts src/ui/build-config.test.ts
src/ui/parse-stdout.test.ts`
- `corepack pnpm --filter @paperclipai/plugin-sdk ensure-build-deps &&
corepack pnpm --filter @paperclipai/server exec tsc --noEmit`
- `corepack pnpm --filter @paperclipai/server exec vitest run
src/__tests__/adapter-routes.test.ts
src/__tests__/adapter-session-codecs.test.ts
src/__tests__/adapter-models.test.ts`
- `corepack pnpm --filter @paperclipai/ui typecheck`
- `corepack pnpm --filter @paperclipai/ui exec vitest run
src/adapters/metadata.test.ts
src/adapters/adapter-display-registry.test.ts
src/components/AgentConfigForm.test.ts
src/components/AgentConfigForm.render.test.tsx
src/components/transcript/RunTranscriptView.test.tsx`
- `node --test scripts/bootstrap-npm-package.test.mjs
scripts/release-package-map.test.mjs
scripts/verify-release-registry-state.test.mjs`
Note: the server typecheck script calls `pnpm` internally; this dev
shell exposes pnpm through Corepack only, so I ran the two script steps
manually with `corepack pnpm`.
## Risks
- Migration changes existing `acpx_local` Claude/Codex agents to native
adapter types and clears old ACPX task sessions/runtime state.
- Custom ACP commands remain on the retired tombstone and will need a
separate future adapter/plugin path.
- ACP auto-selection depends on local Node and ACP server command
prerequisites; remote and unsupported environments fall back to CLI
unless `engine=acp` is explicit.
- `@paperclipai/acpx-engine` is a new public package and needs npm
trusted-publishing bootstrap before release automation can publish it.
> For core feature work, check [`ROADMAP.md`](ROADMAP.md) first and
discuss it in `#dev` before opening the PR. Feature PRs that overlap
with planned core work may need to be redirected — check the roadmap
first. See `CONTRIBUTING.md`.
## Model Used
OpenAI GPT-5 via Codex coding agent. Exact hosted model build and
context-window size are not exposed in this runtime. Tool use included
shell execution, repository editing, GitHub CLI operations, and local
test/typecheck execution.
## Checklist
- [x] I have included a thinking path that traces from project context
to this change
- [x] I have specified the model used (with version and capability
details)
- [x] I have checked ROADMAP.md and confirmed this PR does not duplicate
planned core work
- [x] I have searched GitHub for duplicate or related PRs and linked
them above
- [x] I have either (a) linked existing issues with `Fixes: #` / `Closes
#` / `Refs #` OR (b) described the issue in-PR following the relevant
issue template
- [x] I have not referenced internal/instance-local Paperclip issues or
links (only public GitHub `#NNN` / `github.com/paperclipai/paperclip`
URLs)
- [x] My branch name describes the change (e.g. `docs/...`, `fix/...`)
and contains no internal Paperclip ticket id or instance-derived details
- [x] I have run tests locally and they pass
- [x] I have added or updated tests where applicable
- [x] I have updated relevant documentation to reflect my changes
- [x] I have considered and documented any risks above
- [x] All Paperclip CI gates are green
- [x] Greptile is 5/5 with no open P2s, recommendations, or follow-ups
- [x] I will address all Greptile and reviewer comments before
requesting merge
---------
Co-authored-by: Paperclip <noreply@paperclip.ing>
## Thinking Path
> - Paperclip is the open source app people use to manage AI agents for
work
> - A core part of that experience is watching active agent runs without
dropping into raw logs first
> - Local and sandbox-backed adapters already record useful run output,
progress, and tool activity
> - But active issue threads could sit visually stale while the agent
was syncing workspaces, tailing sandbox output, or emitting incremental
tool-call updates
> - Operators need timely, human-readable progress while preserving the
raw transcript underneath
> - This pull request streams sandbox run-log progress into runtime
status, keeps visible issue threads refreshed, and folds repeated ACPX
tool updates into stable transcript cards
> - The benefit is that long-running agent work becomes easier to
supervise without changing the task/comment control-plane model
## Linked Issues or Issue Description
No public GitHub issue exists for this exact change.
Problem/motivation:
- During long-running sandboxed agent work, the issue UI can appear idle
even though the agent is actively syncing, running tools, or producing
incremental output.
- Operators need realtime feedback at the issue-thread layer, not only
after opening raw logs or waiting for the final heartbeat result.
- Related public context: #1808 previously added live-run status dots to
Projects; #4362 touches heartbeat wakeup behavior but is not a duplicate
of this runtime/UI feedback change.
## What Changed
- Added sandbox run-log streaming support and defaulted sandbox-capable
local adapters into the richer live-feedback path.
- Surfaced environment/sandbox sync progress through heartbeat runtime
status with bounded, redacted snippets.
- Added live issue-thread cache patching so visible active runs update
as progress events arrive.
- Folded repeated ACPX `tool_call` updates into one transcript card
instead of stacking duplicate cards.
- Updated adapter docs and added focused regression coverage for sandbox
log streaming, runtime status, ACPX parsing, live updates, transcript
rendering, and issue chat messages.
## Verification
- `pnpm install --frozen-lockfile`
- `pnpm exec vitest run ui/src/context/LiveUpdatesProvider.test.ts`
- `pnpm exec vitest run
server/src/services/heartbeat-run-runtime-status.test.ts
server/src/__tests__/heartbeat-runtime-state.test.ts
ui/src/context/LiveUpdatesProvider.test.ts`
- `pnpm exec vitest run
packages/adapter-utils/src/execution-target-sandbox.test.ts
packages/adapter-utils/src/sandbox-managed-runtime.test.ts
server/src/services/heartbeat-run-runtime-status.test.ts
server/src/__tests__/agent-live-run-routes.test.ts
server/src/__tests__/heartbeat-runtime-state.test.ts
packages/adapters/acpx-local/src/ui/parse-stdout.test.ts
ui/src/context/LiveUpdatesProvider.test.ts
ui/src/components/transcript/RunTranscriptView.test.tsx
ui/src/lib/issue-chat-messages.test.ts
ui/src/components/IssueChatThread.test.tsx`
- GitHub PR workflow on head `8397953e7b41ccd42e5d9457ee7e4dfb996e4ec5`:
`verify`, build, typecheck/release-registry, e2e, general shards,
serialized server shards, and canary dry run passed.
- Greptile Review on head `8397953e7b41ccd42e5d9457ee7e4dfb996e4ec5`:
Confidence Score 5/5, no unresolved review threads.
## Risks
- Live issue-thread cache patching could miss an edge case for a route
shape not covered by tests.
- Surfacing active-run snippets needs continued care around redaction;
this PR keeps snippets bounded and adds redaction-focused coverage.
- More frequent active-run UI refreshes could expose performance issues
on very large issue threads, though updates are scoped to visible
run/query caches.
## Model Used
OpenAI GPT-5 via Codex, operating as a tool-enabled coding agent with
shell, git, and repository-editing capabilities. Context window size is
not exposed in this runtime.
## Checklist
- [x] I have included a thinking path that traces from project context
to this change
- [x] I have specified the model used (with version and capability
details)
- [x] I have checked ROADMAP.md and confirmed this PR does not duplicate
planned core work
- [x] I have searched GitHub for duplicate or related PRs and linked
them above
- [x] I have either (a) linked existing issues with `Fixes: #` / `Closes
#` / `Refs #` OR (b) described the issue in-PR following the relevant
issue template
- [x] I have not referenced internal/instance-local Paperclip issues or
links (only public GitHub `#NNN` / `github.com/paperclipai/paperclip`
URLs)
- [x] My branch name describes the change (e.g. `docs/...`, `fix/...`)
and contains no internal Paperclip ticket id or instance-derived details
- [x] I have run tests locally and they pass
- [x] I have added or updated tests where applicable
- [x] I have updated relevant documentation to reflect my changes
- [x] I have considered and documented any risks above
- [x] All Paperclip CI gates are green
- [x] Greptile is 5/5 with no open P2s, recommendations, or follow-ups
- [x] I will address all Greptile and reviewer comments before
requesting merge
Co-authored-by: Paperclip <noreply@paperclip.ing>
## Thinking Path
> - Paperclip is the open source app people use to manage AI agents for
work.
> - Adapter names are part of the board-facing agent setup and
management experience.
> - The product now treats adapters as harnesses, while execution
environments are modeled separately.
> - Several built-in adapter labels still carried legacy local wording
from the older harness-by-environment model.
> - That wording makes the UI noisier and implies a distinction users no
longer need to reason about.
> - This pull request normalizes adapter display labels while keeping
persisted adapter type identifiers unchanged.
> - The benefit is clearer adapter selection and management copy without
a database migration.
## Linked Issues or Issue Description
No public GitHub issue was found for this exact cleanup.
Related public PRs:
- Supersedes #8910, an earlier branch for the same cleanup that did not
include the later docs/gateway/Cursor alignment.
- Refs #8819, which is related display-registry work for external
multi-segment adapter labels, but not a duplicate of this built-in label
cleanup.
Feature request details:
- Subsystem affected: Cross-cutting (`ui/`, `packages/adapters`, and
docs).
- Problem or motivation: user-facing adapter names include legacy local
qualifiers even though adapters map to harnesses and environments are
first-class elsewhere.
- Proposed solution: remove the legacy local wording from built-in
display labels, keep machine-readable adapter type ids unchanged, and
keep gateway disambiguation where it is useful.
- Alternatives considered: changing persisted adapter type ids was ruled
out because it would create migration and compatibility risk; one-off UI
replacements were ruled out because the display registry is already the
correct central label boundary.
- Roadmap alignment: this is small adapter UX polish, not a new
roadmap-level core feature.
## What Changed
- Updated the adapter display registry so known adapter labels are final
and no built-in local adapter renders a legacy local suffix.
- Preserved clean derived labels for unknown plugin local types while
keeping gateway disambiguation for unknown gateway types.
- Updated `AdapterManager` to prefer registry labels when the server
reports raw adapter type ids for built-ins.
- Removed legacy local wording from built-in adapter metadata labels in
UI and adapter packages.
- Aligned Cursor adapter metadata with the central display registry
label.
- Updated adapter docs and Storybook fixtures to match the new display
names.
- Added focused registry coverage for built-in labels and unknown plugin
suffix behavior.
## Verification
- `pnpm check:tokens`
- `git diff --check origin/master...fix/adapter-display-labels`
- Patch-addition scan for added secrets, private paths, and internal
links: no matches.
- GitHub duplicate search for open adapter-label/local-suffix issues and
PRs; #8910 was identified as the older superseded public PR.
- `pnpm exec vitest run
ui/src/adapters/adapter-display-registry.test.ts`
- `pnpm --filter @paperclipai/ui typecheck`
- Stale-label scan found no remaining user-facing display-label
suffixes; remaining local wording is operational/test terminology such
as adapter ids, docs about running locally, and test descriptions.
## Risks
Low risk. The change is display-label and documentation focused, and
adapter type ids remain unchanged. The main risk is ambiguous gateway
naming, mitigated by keeping explicit gateway labels where variants need
disambiguation.
## Model Used
OpenAI GPT-5 via Codex, tool-enabled coding agent in a local repository
workspace. Context window size is not exposed by this environment.
## Checklist
- [x] I have included a thinking path that traces from project context
to this change
- [x] I have specified the model used (with version and capability
details)
- [x] I have checked ROADMAP.md and confirmed this PR does not duplicate
planned core work
- [x] I have searched GitHub for duplicate or related PRs and linked
them above
- [x] I have either (a) linked existing issues with `Fixes: #` / `Closes
#` / `Refs #` OR (b) described the issue in-PR following the relevant
issue template
- [x] I have not referenced internal/instance-local Paperclip issues or
links (only public GitHub `#NNN` / `github.com/paperclipai/paperclip`
URLs)
- [x] My branch name describes the change (e.g. `docs/...`, `fix/...`)
and contains no internal Paperclip ticket id or instance-derived details
- [x] I have run tests locally and they pass
- [x] I have added or updated tests where applicable
- [x] I have updated relevant documentation to reflect my changes
- [x] I have considered and documented any risks above
- [x] All Paperclip CI gates are green
- [x] Greptile is 5/5 with no open P2s, recommendations, or follow-ups
- [x] I will address all Greptile and reviewer comments before
requesting merge
Co-authored-by: Paperclip <noreply@paperclip.ing>
## Thinking Path
> - Paperclip is the open source app people use to manage AI agents for
work.
> - Agent adapters are the boundary between the control plane and the
runtimes that actually do work.
> - Hermes support needs to be available as first-class local and
gateway adapters while still preserving the adapter-manager override
path for external packages.
> - The adapter work touches runtime execution, UI adapter metadata,
onboarding prompts, scoped credentials, release packaging, and smoke
coverage, so the handoff needs concrete verification rather than only
unit tests.
> - This pull request adds built-in Hermes local and Hermes gateway
support, keeps external adapter overrides compatible, and
documents/tests the gateway flow end to end.
> - The benefit is that operators can hire Hermes-backed agents without
a manual plugin install, while self-hosted installs can still
override/shadow the built-ins through Adapter manager packages.
## Linked Issues or Issue Description
No public GitHub issue exists for this exact Hermes built-in adapter,
gateway onboarding, and release-source work.
Problem description:
- Hermes local and gateway adapters need a public, reviewable source
path in the monorepo so package artifacts and built-in adapter behavior
match the application source.
- Operators need built-in `hermes_local` and `hermes_gateway` adapter
choices without losing the ability to install external Hermes packages
as overrides.
- Gateway onboarding needs secure defaults for API server URLs, API
keys, and generated agent setup text.
- Hermes-originated task bridge credentials need narrower API-key scope
configuration.
- Related public PRs found during duplicate search include #3027, #2363,
#7544, #7950, #8095, and #8543.
## What Changed
- Added the unified Hermes adapter package with local and gateway
server/UI/CLI exports, config schemas, transcript parsing, model
detection, and package metadata.
- Registered `hermes_local` and `hermes_gateway` as built-in adapters
across shared constants, server registries, CLI packaging, and UI
adapter registries.
- Kept the external adapter override path compatible so installed Hermes
packages can shadow built-ins and restore the built-in parser when
disabled.
- Added Hermes gateway onboarding docs, board-operator docs, Docker
smoke assets, and shell smoke harnesses for join/e2e validation.
- Added scoped task-bridge API-key support, authorization checks,
issue-origin handling, and tests for Hermes-created Paperclip tasks.
- Hardened gateway transport and redaction behavior for API keys,
headers, session data, and smoke diagnostics.
- Updated release packaging/bootstrap checks for the Hermes packages
while leaving `pnpm-lock.yaml` out of the PR per repository policy.
## Verification
Targeted local verification recorded before PR handoff:
- `pnpm --filter @paperclipai/hermes-paperclip-adapter exec vitest run
src/gateway/server/execute.test.ts` — 14/14 passed.
- `pnpm test:hermes-gateway-smoke` — 6/6 passed.
- Hermes package typecheck/build checks passed.
- Focused server/UI adapter tests passed — 31/31.
- Release helper Node tests passed — 18/18.
- `git diff --check origin/master..HEAD` passed.
Fresh Docker E2E smoke evidence:
- Ran `pnpm smoke:hermes-gateway-e2e` on 2026-06-26 with a fresh state
directory and fresh Docker container against a live Paperclip dev
server.
- Hermes direct execution reached `completed`.
- Hermes stop/cancel path reached `cancelled`.
- Hermes gateway created a Paperclip task, Paperclip ran the Hermes
agent, and the task reached `done` with the expected marker response.
- Temporary board auth keys, token files, smoke state, and Docker
containers were cleaned up after the run.
PR checks on head `b5eae40ce`:
- GitHub Actions passed: `policy`, `review`, `Typecheck + Release
Registry`, all general test shards, all serialized server shards,
`Build`, `Canary Dry Run`, `e2e`, and aggregate `verify`.
- External checks passed: Snyk and Socket Project Report.
- External Socket Pull Request Alerts remained pending after the
first-party CI matrix completed.
## Risks
- Medium risk: this spans adapter registration, package publishing,
gateway execution, onboarding docs, API-key scoping, and UI adapter
metadata.
- Migration risk is low: the scope-config migration adds a nullable
column and does not rewrite existing keys.
- Gateway execution depends on operator-provided Hermes API
configuration; the smoke covers the Docker gateway path but real
deployments may differ by network/auth setup.
- Direct Greptile review on the latest expanded diff is file-count
limited, although the commitperclip review gate passed.
> For core feature work, check [`ROADMAP.md`](ROADMAP.md) first and
discuss it in `#dev` before opening the PR. Feature PRs that overlap
with planned core work may need to be redirected — check the roadmap
first. See `CONTRIBUTING.md`.
## Model Used
OpenAI Codex, GPT-5 coding agent, tool use enabled in a local repository
workspace. Context window size is not exposed in this environment.
## Checklist
- [x] I have included a thinking path that traces from project context
to this change
- [x] I have specified the model used (with version and capability
details)
- [x] I have checked ROADMAP.md and confirmed this PR does not duplicate
planned core work
- [x] I have searched GitHub for duplicate or related PRs and linked
them above
- [x] I have either (a) linked existing issues with `Fixes: #` / `Closes
#` / `Refs #` OR (b) described the issue in-PR following the relevant
issue template
- [x] I have not referenced internal/instance-local Paperclip issues or
links (only public GitHub `#NNN` / `github.com/paperclipai/paperclip`
URLs)
- [x] My branch name describes the change (e.g. `docs/...`, `fix/...`)
and contains no internal Paperclip ticket id or instance-derived details
- [x] I have run tests locally and they pass
- [x] I have added or updated tests where applicable
- [x] I have updated relevant documentation to reflect my changes
- [x] I have considered and documented any risks above
- [x] All Paperclip CI gates are green
- [x] Commitperclip review gate is green; direct Greptile review is
file-count limited on the latest expanded diff
- [x] I will address all Greptile and reviewer comments before
requesting merge
---------
Co-authored-by: Paperclip <noreply@paperclip.ing>
Re-align phase1 with upstream: hermes_local ships via hermes-paperclip-adapter on the server and UI (hermes-local module). Fixes ERR_PNPM_OUTDATED_LOCKFILE from server/package.json missing a dep still present in the lockfile.
Add shared BUILTIN_ADAPTER_TYPES and skip external plugin registration when it would override a built-in type. Docs list Hermes as built-in; Droid remains the primary external example.
Made-with: Cursor
- Plugin loader: install/reload/remove/reinstall external adapters
from npm packages or local directories
- Plugin store persisted at ~/.paperclip/adapter-plugins.json
- Self-healing UI parser resolution with version caching
- UI: Adapter Manager page, dynamic loader, display registry
with humanized names for unknown adapter types
- Dev watch: exclude adapter-plugins dir from tsx watcher
to prevent mid-request server restarts during reinstall
- All consumer fallbacks use getAdapterLabel() for consistent display
- AdapterTypeDropdown uses controlled open state for proper close behavior
- Remove hermes-local from built-in UI (externalized to plugin)
- Add docs for external adapters and UI parser contract
- Fix openclaw → openclaw_gateway type key in adapters overview and managing-agents guide
- Add missing adapters to overview table: hermes_local, cursor, pi_local
- Mark gemini_local as experimental (adapter package exists but not in stable type enum)
- Update "Choosing an Adapter" recommendations to match stable adapter set
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Restored docs/ directory that was accidentally deleted by `git add -A`
in the v0.2.3 release script
- Replaced generic "P" favicon with actual paperclip icon using brand
primary color (#2563EB)
- Added light/dark logo SVGs for Mintlify navbar (paperclip icon + wordmark)
- Updated docs.json with logo configuration for dark/light mode
- Fixed release.sh to stage only release-related files instead of `git add -A`
to prevent sweeping unrelated changes into release commits
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Rename all workspace packages from @paperclip/* to @paperclipai/* and
the CLI binary from `paperclip` to `paperclipai` in preparation for
npm publishing. Bump CLI version to 0.1.0 and add package metadata
(description, keywords, license, repository, files). Update all
imports, documentation, user-facing messages, and tests accordingly.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Dotta
David V
Devin Foley
Nicky Leach
HenkDz
dotta
Aditya Sasidhar
Konan69
Dotta
Forgotten
