Adds two new webhook trigger signing modes for external provider
compatibility:
- github_hmac: accepts X-Hub-Signature-256 header with
HMAC-SHA256(secret, rawBody), no timestamp prefix. Compatible with
GitHub, Sentry, and services following the same standard.
- none: no authentication; the 24-char hex publicId in the URL acts
as the shared secret. For services that cannot add auth headers.
The replay window UI field is hidden when these modes are selected
since neither uses timestamp-based replay protection.
Closes#1892
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Addresses GHSA-mw96-cpmx-2vgc (arbitrary file write via path
traversal in rollup <4.59.0). Bumps the direct dependency in the
plugin authoring example and adds a pnpm override for transitive
copies via Vite.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Fix external adapters (hermes, droid) not auto-selected when
navigating with ?adapterType= param — was using a stale
module-level Set built before async adapter registration
- Move SchemaConfigFields to render after thinking effort (same
visual area as Claude's chrome toggle) instead of bottom of
config section
- Extract SelectField into its own component to fix React hooks
order violation when schema fields change between renders
- Add onAdapterChange() subscription in registry.ts so
registerUIAdapter() notifies components when dynamic parsers
load, fixing stale parser for old runs
- Add parserTick to both RunTranscriptView and
useLiveRunTranscripts to force recomputation on parser change
- Plugin loader: install/reload/remove/reinstall external adapters
from npm packages or local directories
- Plugin store persisted at ~/.paperclip/adapter-plugins.json
- Self-healing UI parser resolution with version caching
- UI: Adapter Manager page, dynamic loader, display registry
with humanized names for unknown adapter types
- Dev watch: exclude adapter-plugins dir from tsx watcher
to prevent mid-request server restarts during reinstall
- All consumer fallbacks use getAdapterLabel() for consistent display
- AdapterTypeDropdown uses controlled open state for proper close behavior
- Remove hermes-local from built-in UI (externalized to plugin)
- Add docs for external adapters and UI parser contract
The openclaw_gateway adapter hardcodes the Paperclip API key path to
~/.openclaw/workspace/paperclip-claimed-api-key.json in buildWakeText().
In multi-agent OpenClaw deployments, each agent has its own workspace
with its own key file. The hardcoded path forces all agents to share
one key, breaking agent identity isolation.
Add a claimedApiKeyPath field to the adapter config (with UI input)
that allows operators to set a per-agent path. Falls back to the
current default when unset — zero behavior change for existing
deployments.
Fixes#930
Expose telemetry.track through the plugin SDK and server host bridge, forward plugin-prefixed events into the shared telemetry client, and demonstrate the capability in the kitchen sink example.\n\nCo-Authored-By: Paperclip <noreply@paperclip.ing>
Restructure the TelemetryClient to send the correct backend envelope
format ({app, schemaVersion, installId, events: [{name, occurredAt, dimensions}]})
instead of the old per-event format. Update all event dimension names
to match the backend registry (agent_role, adapter_type, error_code, etc.).
Co-Authored-By: Paperclip <noreply@paperclip.ing>
The TelemetryClient only flushed at 50 events, so the server silently
lost all queued telemetry on restart. Add startPeriodicFlush/stop methods
to TelemetryClient, wire up 60s periodic flush in server initTelemetry,
and flush on SIGTERM/SIGINT before exit.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Add the shared telemetry sender, wire the CLI/server emit points,
and cover the config and completion behavior with tests.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Avoid relying on ComSpec for .cmd/.bat invocation in runChildProcess. Some Win11 environments set ComSpec to PowerShell, which breaks cmd-specific flags (/d /s /c) and causes adapter CLI discovery failures (e.g. opencode models).
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Expose project and execution workspace runtime defaults, control endpoints, startup recovery, and operator UI for start/stop/restart flows.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
After the mocked RPC spawn fails, getQuotaWindows() still calls
readCodexToken(). Use an empty mkdtemp directory for CODEX_HOME for the
duration of the test so we never read ~/.codex/auth.json or call WHAM.
Add a Vitest case that mocks `node:child_process.spawn` so the child
emits `error` (ENOENT) after the constructor attaches listeners.
`getQuotaWindows()` must resolve with `ok: false` instead of leaving an
unhandled `error` event on the process.
Register `packages/adapters/codex-local` in the root Vitest workspace.
Document in DEVELOPING.md that a missing `codex` binary should not take
down the API server during quota polling.
When the `codex` binary is absent from PATH, Node.js emits an `error`
event on the ChildProcess. Because `CodexRpcClient` only subscribed to
`exit` and `data` events, the `error` event was unhandled — causing
Node to throw it as an uncaught exception and crash the server.
Add an `error` handler in the constructor that rejects all pending RPC
requests and clears the queue. This makes a missing `codex` binary a
recoverable condition: `fetchCodexRpcQuota()` rejects, `getQuotaWindows()`
catches the error and returns `{ ok: false }`, and the server stays up.
The fix mirrors the existing pattern in `runChildProcess`
(packages/adapter-utils/src/server-utils.ts) which already handles
`ENOENT` the same way for the main task execution path.
- probe host support on every platform instead of special-casing darwin
- re-export the db package helper from server and cli tests
Co-Authored-By: Paperclip <noreply@paperclip.ing>
When CURSOR_API_KEY is not set, check ~/.cursor/cli-config.json for
authInfo from `agent login` before emitting the missing key warning.
Users authenticated via native login no longer see a false warning.
The previous documentation parenthetical "(defaulting to ~/.codex/skills/)"
was misleading because Paperclip almost always sets CODEX_HOME to a
per-company managed home. Update index.ts docs, skills.ts detail string,
and execute.ts inline comment to make the runtime path unambiguous.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Setting the env var before the user-config loop meant adapter env
overrides could disable the guard. Move it after the loop so it
always wins, matching the pattern already used in test.ts and
models.ts.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Pi outputs the model list to stderr instead of stdout. This fix checks
stderr first and falls back to stdout for compatibility with older
versions.
Fixes model discovery returning empty arrays and environment tests
failing with 'Pi returned no models' error.
Set OPENCODE_DISABLE_PROJECT_CONFIG=true in all OpenCode invocations
(execute, model discovery, environment test) to stop the OpenCode CLI
from writing an opencode.json file into the project working directory.
Model selection is already passed via the --model CLI flag.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
The default fallback in ensureCodexSkillsInjected still referenced the
old function name. Updated to use resolveCodexSkillsDir with shared
home as fallback.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
The previous commit incorrectly used resolveSharedCodexHomeDir() (~/.codex)
but Codex runs with CODEX_HOME set to a per-company managed home under
~/.paperclip/instances/. Skills injected into ~/.codex/skills/ would not
be discoverable by Codex. Now uses effectiveCodexHome directly.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
The Codex adapter was the only one injecting skills into
<cwd>/.agents/skills/, polluting the project's git repo. All other
adapters (Gemini, Cursor, etc.) use a home-based directory. This
changes the Codex adapter to inject into ~/.codex/skills/ (resolved
via resolveSharedCodexHomeDir) to match the established pattern.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Use path.join instead of string concatenation for the auth.json
fallback path in the detail message, ensuring correct path
separators on Windows.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When adapter config has no CODEX_HOME but process.env.CODEX_HOME is
set, readCodexAuthInfo reads from the process env path. The detail
message now uses codexHomeDir() instead of hardcoded "~/.codex" so
the displayed path always matches where credentials were read from.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Show the configured CODEX_HOME path instead of hardcoded ~/.codex
when the email fallback message is displayed.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add tests for codex_native_auth_present and codex_openai_api_key_missing
code paths. Also pass adapter-configured CODEX_HOME through to
readCodexAuthInfo so the probe respects per-adapter home directories.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The embedded-postgres library hardcodes --lc-messages=en_US.UTF-8 and
strips the parent process environment when spawning initdb/postgres.
In slim Docker images (e.g. node:20-bookworm-slim), the en_US.UTF-8
locale isn't installed, causing initdb to exit with code 1.
Two fixes applied:
1. Add --lc-messages=C to all initdbFlags arrays (overrides the
library's hardcoded locale since our flags come after in the spread)
2. pnpm patch on embedded-postgres to preserve process.env in spawn
calls, preventing loss of PATH, LD_LIBRARY_PATH, and other vars
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Loading an instructions file is normal, expected behavior — not worth
logging to stdout/stderr on every run. Warning logs for failed reads
are preserved.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
The environment test warned about OPENAI_API_KEY being unset even
when Codex was authenticated via `codex auth`. Now checks
~/.codex/auth.json before emitting the warning.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
mkdir -p the CODEX_HOME directory in codex-local adapter and the
agentHome directory in the heartbeat service before passing them to
adapters. This prevents CLI tools from erroring when their home
directory hasn't been created yet. Covers all local adapters that
set AGENT_HOME.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Drop "api" from the trigger kind dropdown and disable the "webhook"
option with a "COMING SOON" label until it's ready.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Persist child-process metadata for local adapter runs, keep detached runs alive when their pid still exists, queue a single automatic retry when the pid is confirmed dead, and clear detached warnings when the original run reports activity again.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
- Add updateCompanyBrandingSchema restricting agent-updatable fields to name,
description, brandColor, and logoAssetId
- Update PATCH /api/companies/:companyId to allow CEO agents with branding-only
fields while keeping admin fields (status, budget, etc.) board-only
- Allow agents to GET /api/companies/:companyId for reading company info
- issuePrefix (company slug) remains protected — not in any update schema
- Document branding APIs in SKILL.md quick reference and api-reference.md
Co-Authored-By: Paperclip <noreply@paperclip.ing>
When skills are imported via skills.sh URLs or key-style imports
(org/repo/skill), the stored sourceType is now "skills_sh" with the
original skills.sh URL as sourceLocator, instead of "github" with the
resolved GitHub URL.
- Add "skills_sh" to CompanySkillSourceType and CompanySkillSourceBadge
- Track originalSkillsShUrl in parseSkillImportSourceInput
- Override sourceType/sourceLocator in importFromSource for skills.sh
- Handle skills_sh in key derivation, source info, update checks,
file reads, portability export, and UI badge rendering
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Pi sometimes sends tool results as a direct array [{"type":"text","text":"..."}]
rather than wrapped in {"content": [...]}. Now handles both formats to
properly extract text content instead of showing raw JSON.
Pi returns tool results in format: {"content": [{"type": "text", "text": "..."}]}
Previously we were JSON.stringify-ing the whole object, showing as:
{"content":[{"type":"text","text":"..."}]}
Now we extract the actual text content for cleaner display.
The turn_end event includes toolResults array with toolName. Previously
the parsing only included toolCallId, now we also extract toolName so
the UI can display the correct tool name even when tool_result entries
arrive without a preceding tool_call.
When tool_result entries arrive without a matching tool_call, the transcript
was showing generic 'tool' as the name. Now pl-local parses toolName from
tool_execution_end events and passes it through, so the UI can display
the actual tool name (e.g., 'bash', 'Read', 'Ls') instead of 'tool'.
- Hoist PI_AGENT_SKILLS_DIR to module-level constant to avoid duplicate path computation
- Always create ~/.pi/agent/skills directory before early return in ensurePiSkillsInjected, so the path is valid when --skill flag is passed
- Add --skill ~/.pi/agent/skills to pi CLI invocation so it loads the paperclip skill
- Enable pi_local in the AgentConfigForm adapter type dropdown (was showing as coming soon)
When a skill's source is "Paperclip workspace", clicking the label now
copies the absolute path to the managed skills workspace to the clipboard
and shows a toast confirmation.
- Add sourcePath field to CompanySkillDetail and CompanySkillListItem types
- Return managedRoot path as sourcePath from deriveSkillSourceInfo for
Paperclip workspace skills
- Make source label a clickable button in SkillPane detail view
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Expose adapter-discovered user-installed skills with provenance metadata, share persistent skill snapshot classification across local adapters, and render unmanaged skills as a read-only section in the agent skills UI.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Keep existing instructionsFilePath agents in external-bundle mode during edits, expose legacy promptTemplate as a deprecated virtual file, and reuse the shared PackageFileTree component in the Prompts view.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Address Greptile review feedback:
1. Wrap os.userInfo() in try/catch — it throws SystemError when the
current UID has no /etc/passwd entry (e.g. `docker run --user 1234`
with a minimal image). Falls back to process.env.HOME gracefully.
2. Add HOME to VOLATILE_ENV_KEY_EXACT so the discovery cache key is
not affected by the caller-supplied HOME vs the resolved HOME.
os.userInfo().homedir is constant for the process lifetime, so
HOME adds no useful cache differentiation.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When Paperclip's server is started via `runuser -u node` (common in
Docker/Fly.io deployments), the HOME environment variable retains the
parent process's value (e.g. /root) instead of the target user's home
directory (/home/node). This causes `opencode models` to miss provider
auth credentials stored under the actual user's home, resulting in
"Configured OpenCode model is unavailable" errors for providers that
require API keys (e.g. zai/zhipuai).
Fix: use `os.userInfo().homedir` (reads from /etc/passwd, not env) to
ensure the child process always sees the correct HOME, regardless of
how the server was launched.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Introduce a singleton instance_settings store and experimental settings API, add the Experimental instance settings page, and gate execution workspace behavior behind the new enableIsolatedWorkspaces flag.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Remove unnecessary `as any` casts on capability strings (now valid
PluginCapability members) and add company-membership guards to match
production behavior in plugin-host-services.ts.
Wire issue document list/get/upsert/delete operations through the
JSON-RPC protocol so plugins can manage issue documents with the same
capabilities available via the REST API.
Fixes#940
* public-gh/master: (51 commits)
Use attachment-size limit for company logos
Address Greptile company logo feedback
Drop lockfile from PR branch
Use asset-backed company logos
fix: use appType "custom" for Vite dev server so worktree branding is applied
docs: fix documentation drift — adapters, plugins, tech stack
docs: update documentation for accuracy after plugin system launch
chore: ignore superset artifacts
Dark theme for CodeMirror code blocks in MDXEditor
Remove duplicate @paperclipai/adapter-openclaw-gateway in server/package.json
Fix code block styles with robust prose overrides
Add Docker setup for untrusted PR review in isolated containers
Fix org chart canvas height to fit viewport without scrolling
Add doc-maintenance skill for periodic documentation accuracy audits
Fix sidebar scrollbar: hide track background when not hovering
Restyle markdown code blocks: dark background, smaller font, compact padding
Add archive project button and filter archived projects from selectors
fix: address review feedback — subscription cleanup, filter nullability, stale diagram
fix: wire plugin event subscriptions from worker to host
fix(ui): hide scrollbar track background when sidebar is not hovered
...
# Conflicts:
# packages/db/src/migrations/meta/0030_snapshot.json
# packages/db/src/migrations/meta/_journal.json
- Extract all Anthropic credential/API logic into claude-local/src/server/quota.ts
- Extract all OpenAI/WHAM credential/API logic into codex-local/src/server/quota.ts
- Add optional getQuotaWindows() to ServerAdapterModule in adapter-utils
- Rewrite quota-windows.ts as a 29-line thin aggregator with zero provider knowledge
- Wire getQuotaWindows into adapter registry for claude-local and codex-local
- Add 47 unit tests covering toPercent, secondsToWindowLabel, WHAM normalization,
readClaudeToken, readCodexToken, fetchClaudeQuota, fetchCodexQuota, fetchWithTimeout
- Add 8 unit tests covering parseDateRange validation and byProvider pro-rata math
Adding a third provider now requires only touching that provider's adapter.
- add byAgentModel endpoint and expandable per-agent model sub-rows in the spend tab
- validate date range inputs with isNaN + badRequest to return HTTP 400 on bad input
- move CostByProject from a local api/costs.ts definition into packages/shared types
- gate providerData query on mainTab === providers, consistent with weekData/windowData/quotaData
- fix byProject range filter from finishedAt to startedAt, consistent with byProvider runs query
- fix WHAM used_percent threshold from <= 1 to < 1 to avoid misclassifying 1% usage as 100%
- replace inline opacity style with tailwind bg-primary/85 class in ProviderQuotaCard
- reset expandedAgents set when company or date range changes
- sort agent model sub-rows by cost descending in ui memo
reads local claude and codex auth files server-side, calls provider
quota apis (anthropic oauth usage, chatgpt wham/usage), and surfaces
live usedPercent per window in ProviderQuotaCard with threshold fill colors
adds a new /usage page that lets board operators see how much each ai
provider is consuming across any date window, with per-model breakdowns,
rolling 5h/24h/7d burn windows, weekly budget bars, and a deficit notch
when projected spend is on track to exceed the monthly budget.
- new GET /companies/:id/costs/by-provider endpoint aggregates cost events
by provider + model with pro-rated billing type splits from heartbeat runs
- new GET /companies/:id/costs/window-spend endpoint returns rolling window
spend (5h, 24h, 7d) per provider with no schema changes
- QuotaBar: reusable boxed-border progress bar with green/yellow/red
threshold fill colors and optional deficit notch
- ProviderQuotaCard: per-provider card showing budget allocation bars,
rolling windows, subscription usage, and model breakdown with token/cost
share overlays
- Usage page: date preset toggles (mtd, 7d, 30d, ytd, all, custom),
provider tabs, 30s polling plus ws invalidation on cost_event
- custom date range blocks queries until both dates are selected and
treats boundaries as local-time (not utc midnight) so full days are
included regardless of timezone
- query key to timestamp is floored to the nearest minute to prevent
cache churn on every 30s refetch tick
When importing a company, users can now choose the adapter type for each
imported agent. Defaults to the current company CEO's adapter type (or
claude_local if none). Includes an expandable "configure adapter" section
per agent that renders the adapter-specific config fields.
- Added adapterOverrides to import request schema and types
- Built AdapterPickerList UI component in CompanyImport.tsx
- Backend applies adapter overrides when creating/updating agents
Co-Authored-By: Paperclip <noreply@paperclip.ing>
- Remove the collision strategy dropdown; always default to "rename"
- Add a "Conflicts to resolve" chores list above the package file tree
showing each collision with editable rename fields (oldname → newname)
- Default rename uses source folder prefix (e.g. gstack-CEO)
- Per-item "skip" button that syncs with file tree checkboxes
- COMPANY.md defaults to skip when importing to an existing company
- Add nameOverrides support to API types and server so user-edited
renames are passed through to the import
Co-Authored-By: Paperclip <noreply@paperclip.ing>
- Add `files` and `manifest` to CompanyPortabilityPreviewResult so the
import UI can show actual file contents and metadata
- Rewrite import preview as a file/folder tree (matching export page
design language) with per-file checkboxes to include/exclude items
- Show action badges (create/update/skip) on each file based on the
import plan, with unchecked files dimmed and badged as "skip"
- Add rich frontmatter preview: clicking a file shows parsed frontmatter
as structured data (name, title, reportsTo, skills) plus markdown body
- Include skills count in the sidebar summary
- Update import button to show dynamic file count that updates on
check/uncheck
- Both /tree/ and /blob/ GitHub URLs already supported by backend
Co-Authored-By: Paperclip <noreply@paperclip.ing>
- Add scopedBus.clear() in dispose() to prevent subscription accumulation
on worker crash/restart cycles
- Use two-arg subscribe() overload when filter is null instead of passing
empty object; fix filter type to include null
- Update ASCII flow diagram: onEvent is a notification, not request/response
Plugin workers register event handlers via `ctx.events.on()` in the SDK,
but these subscriptions were never forwarded to the host process. The host
sends events via `notifyWorker("onEvent", ...)` which produces a JSON-RPC
notification (no `id`), but the worker only dispatched `onEvent` as a
request handler — notifications were silently dropped.
Changes:
- Add `events.subscribe` RPC method so workers can register subscriptions
on the host-side event bus during setup
- Handle `onEvent` notifications in the worker notification dispatcher
(previously only `agents.sessions.event` was handled)
- Add `events.subscribe` to HostServices interface, capability map, and
host client handler
- Add `subscribe` handler in host services that registers on the scoped
plugin event bus and forwards matched events to the worker
* public-gh/master:
Drop lockfile from watcher change
Tighten plugin dev file watching
Fix plugin smoke example typecheck
Fix plugin dev watcher and migration snapshot
Clarify plugin authoring and external dev workflow
Expand kitchen sink plugin demos
fix: set AGENT_HOME env var for agent processes
Add kitchen sink plugin example
Simplify plugin runtime and cleanup lifecycle
Add plugin framework and settings UI
# Conflicts:
# packages/db/src/migrations/meta/0029_snapshot.json
# packages/db/src/migrations/meta/_journal.json
Matches the pattern in codex-local and cursor-local adapters,
giving operators consistent feedback about whether instructions
were actually loaded.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The $AGENT_HOME environment variable was referenced by skills (e.g.
para-memory-files) but never actually set, causing runtime errors like
"/HEARTBEAT.md: No such file or directory" when agents tried to resolve
paths relative to their home directory.
Add agentHome to the paperclipWorkspace context in the heartbeat service
and propagate it as the AGENT_HOME env var in all local adapters.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
Resolve conflicts by keeping the issue-documents work alongside upstream heartbeat-context, worktree branding, and adapter runtime updates.
Co-Authored-By: Paperclip <noreply@paperclip.ing>
- reapOrphanedRuns() now only scans running runs; queued runs are
legitimately absent from runningProcesses (waiting on concurrency
limits or issue locks) so including them caused false process_lost
failures (closes#90)
- Add module-level activeRunExecutions set so non-child-process adapters
(http, openclaw) are protected from the reaper during execution
- Add resumeQueuedRuns() to restart persisted queued runs after a server
restart, called at startup and each periodic tick
- Add outer catch in executeRun() so setup failures (ensureRuntimeState,
resolveWorkspaceForRun, etc.) are recorded as failed runs instead of
leaving them stuck in running state
- Guard resumeQueuedRuns() against paused/terminated/pending_approval agents
- Increase opencode models discovery timeout from 20s to 45s
* public-gh/master:
Default Gemini adapter to yolo mode and add API access prompt note
fix: remove Cmd+1..9 company-switch shortcut
fix(ui): prevent IME composition Enter from moving focus in new issue title
fix(cli): add restart hint after allowed-hostname change
docs: remove obsolete TODO for CONTRIBUTING.md
fix: default dangerouslySkipPermissions to true for unattended agents
fix: route heartbeat cost recording through costService
Show issue creator in properties sidebar
Gemini CLI only registers run_shell_command in --approval-mode yolo.
Non-yolo modes don't expose it at all, making Paperclip API calls
impossible. Always pass --approval-mode yolo and remove the now-unused
policy engine code, approval mode config, and UI toggles.
Add a "Paperclip API access note" to the prompt with curl examples
via run_shell_command, since the universal SKILL.md is tool-agnostic.
Also extract structured question events from Gemini assistant messages
to support interactive approval flows.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
On macOS, `initdb` defaults to SQL_ASCII encoding because it infers
locale from the system environment. When `ensurePostgresDatabase()`
creates a database without specifying encoding, the new database
inherits SQL_ASCII from the cluster. This causes string functions like
`left()` to operate on bytes instead of characters, producing invalid
UTF-8 when multi-byte characters are truncated.
Two-part fix:
1. Pass `--encoding=UTF8 --locale=C` via `initdbFlags` to all
EmbeddedPostgres constructors so the cluster defaults to UTF-8.
2. Explicitly set `encoding 'UTF8'` in the CREATE DATABASE statement
with `template template0` (required because template1 may already
have a different encoding) and `C` locale for portability.
Existing databases created with SQL_ASCII are NOT automatically fixed;
users must delete their local `data/db` directory and restart to
re-initialize the cluster.
Relates to #636
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The OpenClaw Gateway's agent method has strict parameter validation
that rejects unknown properties. The paperclip property was being
sent at the root level of agentParams, causing validation failures
with error: "invalid agent params: at root: unexpected property 'paperclip'"
The paperclip metadata is already included in the message field
via wakeText, so removing the separate paperclip property resolves
the validation error while preserving the necessary information.
Fixes#606
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds support for Hermes Agent (https://github.com/NousResearch/hermes-agent)
as a managed employee in Paperclip companies.
Hermes Agent is a full-featured AI agent by Nous Research with 30+ native
tools, persistent memory, session persistence, 80+ skills, MCP support,
and multi-provider model access.
Changes:
- Add 'hermes_local' to AGENT_ADAPTER_TYPES (packages/shared)
- Add @nousresearch/paperclip-adapter-hermes dependency (server)
- Register hermesLocalAdapter in the adapter registry (server)
The adapter package is maintained at:
https://github.com/NousResearch/hermes-paperclip-adapter
The codex-local and cursor-local adapters already wrap the
instructionsFilePath read in try/catch, logging a warning and
continuing without instructions. The claude-local adapter was missing
this handling, causing ENOENT crashes when the instructions file
doesn't exist.
Fixes#529
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Update stale doc comment in index.ts to reflect direct ~/.gemini/skills/
injection instead of tmpdir approach
- Remove bare GEMINI_API_KEY/GOOGLE_API_KEY from auth regex to prevent
false positives when those strings appear in assistant output
- Align hello probe sandbox/approvalMode flags with execute.ts
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
GEMINI_CLI_HOME pointed to a tmpdir which broke OAuth auth since the CLI
couldn't find credentials in the real home directory.
Instead, inject Paperclip skills directly into ~/.gemini/skills/ (matching
the pattern used by cursor, codex, pi, and opencode adapters). This lets
the Gemini CLI find both auth credentials and skills in their natural
location without any GEMINI_CLI_HOME override.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The Gemini CLI supports OAuth login via `gemini auth login` which stores
credentials locally without setting any env vars. The previous warn-level
check on missing GEMINI_API_KEY caused false alarms when CLI-based OAuth
was used. The hello probe that follows is the real auth authority — if
auth is actually broken, it will catch it and report appropriately.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Incorporate improvements from PR #13 and #105 into the gemini-local adapter:
- Add detectGeminiAuthRequired() for runtime auth failure detection with
errorCode: "gemini_auth_required" on execution results
- Add isGeminiTurnLimitResult() to detect exit code 53 / turn_limit status
and clear session to prevent stuck sessions on next heartbeat
- Add describeGeminiFailure() for structured error messages from parsed
result events including errors array extraction
- Return parsed resultEvent in resultJson instead of raw stdout/stderr
- Add isRetry guard to prevent stale session ID fallback after retry
- Replace boolean yolo with approvalMode string (default/auto_edit/yolo)
with backwards-compatible config.yolo fallback
- Add sandbox config option (--sandbox / --sandbox=none)
- Add GOOGLE_GENAI_USE_GCA auth detection in environment test
- Consolidate auth detection regex into shared detectGeminiAuthRequired()
- Add gemini-2.0-flash and gemini-2.0-flash-lite model IDs
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Isolate skills injection using a temporary directory mapped via
GEMINI_CLI_HOME, mirroring the claude-local sandbox approach
instead of polluting the global ~/.gemini/skills directory.
- Update the environment probe to use `--output-format stream-json`
so the payload matches the downstream parseGeminiJsonl parser.
- Deduplicate `firstNonEmptyLine` helper by extracting it to a
shared `utils.ts` module.
- Clean up orphaned internal exports and update adapter documentation.
When the Paperclip server is started from within a Claude Code session
(e.g. `npx paperclipai run` in a Claude Code terminal), the `CLAUDECODE`
and related env vars (`CLAUDE_CODE_ENTRYPOINT`, `CLAUDE_CODE_SESSION`,
`CLAUDE_CODE_PARENT_SESSION`) leak into `process.env`. Since
`runChildProcess()` spreads `process.env` into the child environment,
every spawned `claude` CLI process inherits these vars and immediately
exits with: "Claude Code cannot be launched inside another Claude Code
session."
This is particularly disruptive for the `claude-local` adapter, where
every agent run spawns a `claude` child process. A single contaminated
server start (or cron job that inherits the env) silently breaks all
agent executions until the server is restarted in a clean environment.
The fix deletes the four known Claude Code nesting-guard env vars from
the merged environment before passing it to `spawn()`.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Added disableSignUp to authConfigSchema in config-schema.ts
- Added authDisableSignUp to Config interface
- Added parsing from PAPERCLIP_AUTH_DISABLE_SIGN_UP env or config file
- Passed to better-auth emailAndPassword.disableSignUp
When true, blocks new user registrations on public instances.
Defaults to false (backward compatible).
Fixes#241
Move duplicated roleLabels map from AgentProperties.tsx, Agents.tsx,
OrgChart.tsx, and agent-config-primitives.tsx into AGENT_ROLE_LABELS
in packages/shared/src/constants.ts.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The local migrationsFolder variable in migratePostgresIfEmpty duplicated
the module-level MIGRATIONS_FOLDER constant. Reuse the constant to keep
a single source of truth for the migration path.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
URL.pathname returns /C:/... on Windows, causing doubled drive letters
when Node prepends the current drive. fileURLToPath handles this
correctly across platforms.
Fixes#132
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Update cwd test to expect an error for missing directories (matches
createIfMissing: false accepted from review)
- Add warn-level check for non-ProviderModelNotFoundError failures
during best-effort model discovery when no model is configured
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Move costUsd to top-level return field in parseOpenCodeJsonl (out of usage)
- Fix session-not-found regex to match "Session not found" pattern
- Use callID for toolUseId in UI stdout parser, add status/metadata header
- Fix CLI formatter: separate tool_call/tool_result lines, split step_finish
- Enable createIfMissing for cwd validation in environment tests
- Add empty OPENAI_API_KEY override detection
- Classify ProviderModelNotFoundError as warning during model discovery
- Make model discovery best-effort when no model is configured
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Update cwd test to expect an error for missing directories (matches
createIfMissing: false accepted from review)
- Add warn-level check for non-ProviderModelNotFoundError failures
during best-effort model discovery when no model is configured
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Move costUsd to top-level return field in parseOpenCodeJsonl (out of usage)
- Fix session-not-found regex to match "Session not found" pattern
- Use callID for toolUseId in UI stdout parser, add status/metadata header
- Fix CLI formatter: separate tool_call/tool_result lines, split step_finish
- Enable createIfMissing for cwd validation in environment tests
- Add empty OPENAI_API_KEY override detection
- Classify ProviderModelNotFoundError as warning during model discovery
- Make model discovery best-effort when no model is configured
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Document observed failures before wake-text fix and successful
stock-clean lane pass after fix. Note instrumentation lane limitations.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Include the full Paperclip API workflow (checkout, fetch, update) and
endpoint bans in the wake text sent to OpenClaw agents, preventing
them from guessing non-existent endpoints. Applied to both openclaw
and openclaw_gateway adapters.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Major improvements to the Pi local adapter:
Bug Fixes (Greptile-identified):
- Fix string interpolation in models.ts error message (was showing literal ${detail})
- Fix tool matching in parse.ts to use toolCallId instead of toolName for correct
multi-call handling and result assignment
- Fix dead code in execute.ts by tracking instructionsReadFailed flag
Feature Improvements:
- Switch from print mode (-p) to RPC mode (--mode rpc) to prevent agent from
exiting prematurely and ensure proper lifecycle completion
- Add stdin command sending via JSON-RPC format for prompt delivery
- Add line buffering in execute.ts to handle partial JSON chunks correctly
- Filter RPC protocol messages (response, extension_ui_request, etc.) from transcript
Cost Tracking:
- Extract cost and usage data from turn_end assistant messages
- Support both Pi format (input/output/cacheRead/cost.total) and generic format
- Add tests for cost extraction and accumulation across multiple turns
All tests pass (12/12), typecheck clean, server builds successfully.
Capture run events, logs, issue state, and container logs on failures
or timeouts for debugging. Write compatibility JSON keys for claimed
API key. Add two-lane validation requirement to test plan.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New adapter type for invoking OpenClaw agents via the gateway protocol.
Registers in server, CLI, and UI adapter registries. Adds onboarding
wizard support with gateway URL field and e2e smoke test script.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add OpenClawEndpointKind type to distinguish between /hooks/wake,
/hooks/agent, open_responses, and generic endpoints. Build appropriate
payloads per endpoint kind with optional sessionKey inclusion.
Refactor webhook execution to use endpoint-aware payload construction.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Remove duplicate opencode_local adapter entry in OnboardingWizard
(old Code-icon version), keeping only the OpenCodeLogoIcon entry
- Extract resolveOpenCodeCommand() helper to deduplicate the
PAPERCLIP_OPENCODE_COMMAND env-var fallback logic in models.ts
- Bump @types/node from ^22.12.0 to ^24.6.0 to match the monorepo
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* public-gh/master:
fix(ui): wrap failed run card actions on mobile
feat(codex): add gpt-5.4 to codex_local model list
persist paperclip data in a named volume
add support to `cursor` and `opencode` in containerized instances
force `@types/node@24` in the server
Add artifact-check to fail fast on broken builds
remove an insecure default auth secret
expose `PAPERCLIP_ALLOWED_HOSTNAMES` in compose files
wait for a health db
update lock file
update typing to node v24 from v20
add missing `openclaw` adapter from deps stage
fix incorrect pkg scope
update docker base image
move docker into `authenticated` deployment mode
Merges paperclipai/paperclip#62 onto latest master (494448d).
Adds complete OpenCode provider with strict model selection,
dynamic model discovery, CLI/server/UI adapter registration.
Resolved conflicts with master's cursor adapter additions,
node v24 typing, and containerized opencode support (201d91b).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Show only the command for shellToolCall/shell inputs instead of the
full payload. Format shell results with exit code + truncated
stdout/stderr sections for readability.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The --yolo flag bypasses interactive prompts more broadly than --trust.
Updated execute, test probe, docs, and test expectations.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Detect JSON-like tool output and format it with indentation instead of
displaying it as a single compressed line.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Export ensureCursorSkillsInjected from the server entrypoint and add
a test for skill directory injection. Document the auto-inject and
auto-trust behaviors in the adapter notes.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The claude-local, codex-local adapters and the server all resolve a
skills/ directory using __dirname-relative paths that only work inside
the monorepo. When installed from npm the paths point outside the
package and cause ENOENT on readdir/readFile.
- Update both adapter execute.ts files to try a published-path
candidate (../../skills from dist/) before falling back to the
monorepo dev path (../../../../../skills from src/).
- Update server readSkillMarkdown() to try the published path first.
- Add "skills" to the files array in server, claude-local, and
codex-local package.json so npm includes them.
- Update release.sh to copy the repo-root skills/ into each package
before publish, and clean up after.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- db build now copies src/migrations/ to dist/migrations/ after tsc,
so SQL + meta JSON files are included in the published package.
Without this, `import("@paperclipai/server")` fails at runtime with
ENOENT when scanning for migration files.
- CLI's importServerEntry() now distinguishes between "module not found"
and "server crashed during startup" for clearer error messages.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Migrate from single-bundle CLI publishing to publishing all @paperclipai/*
packages individually via Changesets. This fixes the "Cannot find package
@paperclipai/server" error when installing from npm.
Changes:
- Add @changesets/cli with fixed versioning (all packages share version)
- Make 7 packages publishable (shared, adapter-utils, db, 3 adapters, server)
- Add build scripts, publishConfig, and files fields to all packages
- Mark @paperclipai/server as external in CLI esbuild config
- Simplify CLI importServerEntry() to use string-literal dynamic import
- Add generate-npm-package-json support for external workspace packages
- Create scripts/release.sh for one-command releases
- Remove old bump-and-publish.sh and version-bump.sh
- All packages start at version 0.2.0
Usage: ./scripts/release.sh patch|minor|major [--dry-run]
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Rename all workspace packages from @paperclip/* to @paperclipai/* and
the CLI binary from `paperclip` to `paperclipai` in preparation for
npm publishing. Bump CLI version to 0.1.0 and add package metadata
(description, keywords, license, repository, files). Update all
imports, documentation, user-facing messages, and tests accordingly.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Claude CLI forbids using both --append-system-prompt-file and
--append-system-prompt simultaneously. Write a merged temp file instead.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add PATCH /agents/:id/instructions-path endpoint for setting or clearing
an agent's instructions file path. Supports relative path resolution
against adapterConfig.cwd. Enforce chain-of-command authorization —
only the agent itself, board members, or ancestor managers can update.
Guard instructions path keys in the general agent update endpoint too.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Fix project mention insertion to use markdown-level replacement instead
of DOM manipulation. Restructure project validator to accept an optional
workspace when creating a project.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add project mention system using project:// URI scheme with optional
color parameter. Mentions render as colored pill chips in markdown
bodies and the WYSIWYG editor. Autocomplete in editors shows both
agents and projects. Server extracts mentioned project IDs from issue
content and returns them in the issue detail response.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add company export, import preview, and import endpoints with manifest-
based bundle format. Includes URL key utilities for agents and projects,
collision detection/rename strategies, and secret requirement tracking.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Wire up instructionsFilePath in CreateConfigValues, adapter docs, and
UI config builders for both Claude and Codex adapters.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add instructionsFilePath config to Claude and Codex adapters, allowing
agents to load external instruction files appended to the system prompt.
Claude uses --append-system-prompt-file; Codex prepends file contents
to the prompt. Add docs:dev script for local Mintlify preview.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add secure claim secret flow for agent join requests with timing-safe
comparison, expiry, and one-time use. Expose machine-readable onboarding
manifests and skill index API endpoints. Add company brand color with
hex validation, pattern icon generation, and settings page integration.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add --chrome flag support for Claude adapter. Detect max-turns
exhaustion (via subtype, stop_reason, or result text) and clear
the session to prevent stale session re-use. Add unit tests.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Introduce openclaw adapter package with server execution, CLI stream
formatting, and UI config fields. Register the adapter across CLI,
server, and UI registries. Add adapter label in all relevant pages.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add assigneeAdapterOverrides JSONB column to issues, allowing per-issue
model, thinking effort, and workspace overrides when assigning to agents.
Heartbeat service merges overrides into adapter config at runtime. New
Issue dialog exposes these options for Claude and Codex adapters.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add AdapterBillingType (api/subscription/unknown) to adapter execution results
so the system can distinguish API-billed vs subscription-billed runs. Enhance
cost service to aggregate subscription vs API run counts and token breakdowns.
Add limit param to heartbeat runs list API and client.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Make workspace cwd optional to support repo-only workspaces that don't require
a local directory. Refactor workspace resolution in heartbeat service to pass
all workspace hints to adapters, add fallback logic when project workspaces
have no valid local cwd, and improve workspace name derivation. Also adds limit
param to heartbeat runs list endpoint.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Move icon name list to shared constants with strict enum validation.
Add /llms/agent-icons.txt endpoint, pass icon through hire flow,
and update skills to reference icon discovery step.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Heartbeat service resolves cwd from task session, project primary
workspace, or agent home directory (~/.paperclip/instances/.../workspaces/).
Adapters receive workspace context and forward it as env vars and
session params. cwd is now optional in adapter config.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New project_workspaces table with primary workspace designation.
Full CRUD routes, service with auto-primary promotion on delete,
workspace management UI in project properties panel, and workspace
data included in project/issue ancestor responses.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New labels and issue_labels tables with cascade deletes, unique
per-company name constraint. CRUD routes for labels, label filtering
on issue list, and label sync on issue create/update. All issue
responses now include labels array.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Fall back to dangerouslyBypassSandbox when the full
dangerouslyBypassApprovalsAndSandbox flag is not set, keeping
the UI toggle in sync with either config key.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Reject requests from unrecognised Host headers when running
authenticated/private. Adds server middleware, CLI `allowed-hostname`
command, config-schema field, and prompt support for configuring
allowed hostnames during onboard/configure.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Derive issue_prefix from first 3 letters of company name with
deterministic suffixes on collision. Migration rebuilds existing
prefixes, reassigns issue numbers, and adds unique indexes.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add detectClaudeLoginRequired and extractClaudeLoginUrl to parse module.
Extract buildClaudeRuntimeConfig for reuse by both execute and the new
runClaudeLogin helper. Include errorCode: "claude_auth_required" and
errorMeta: { loginUrl } in execution results when login is needed.
Export runClaudeLogin from the package index.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add Better Auth, drizzle-orm, @dnd-kit, and remark-gfm dependencies.
Introduce DB schema for auth tables (user, session, account, verification),
company memberships, instance user roles, permission grants, invites, and
join requests. Add assigneeUserId to issues. Extend shared config schema
with deployment mode/exposure/auth settings, add access types and validators,
and wire up new API path constants.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add `icon` text column to agents DB schema with migration
- Add icon field to shared Agent type and validators
- Create AgentIconPicker component with 40+ curated lucide icons and search
- Show clickable icon next to agent name on detail page header
- Replace static Agents nav item with collapsible AGENTS section in sidebar
- Each agent shows its icon (defaulting to Bot) with truncated name
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Antonio
dotta
Wes Belt
Matt Van Horn
Devin Foley
HenkDz
Dotta
bittoby
TimoYi | HearthCore | ZenWise
Timo Götzken
Shoaib Ansari
Mikhail Batukhtin
Richard Anaya
Dotta
John Wessel
Justin Miller
Sai Shankar
HD
gsxdsm
Sigmabrogz
Aaron
Volodymyr Kartavyi
lin
teknium1
Aditya Sasidhar
Jayakrishnan
online5880
Kevin Mok
Chris Farhood
Jason
Matt Van Horn
Aaron
JonCSykes
Victor Duarte
Arthur R Longbottom
Konan69
Forgotten