20ca3aff8d
Bump version to 2.3.4
2021-12-06 11:44:22 +00:00
ace30551fc
Always disable S3 on WIndows
...
This should prevent fresh installs from failing during the multiple reboots
2021-12-06 11:38:26 +00:00
f8aee430ec
Re-disabled network for re-appearance of #115
2021-12-06 11:00:08 +00:00
59e9a73e4c
Clairfy QEMU not found messages
2021-12-03 16:54:33 +00:00
194b303a54
add a display setting in the conf file
2021-12-03 13:49:34 +00:00
ca0f144351
Bump version to 2.3.3
2021-12-03 11:33:56 +00:00
e6823edde7
Make port scans non-blocking
2021-12-03 11:33:41 +00:00
4f0bbfc667
Add --delete-disk and --delete-vm options. Close #227
2021-12-03 11:33:17 +00:00
566faa97d8
Fix case statement
...
The correct separator is "|" and not ",".
2021-11-15 12:33:32 +00:00
084b632eae
Disable S3 when booting Windows with SecureBoot #162
...
Disabling S3 is required while booting Windows with SecureBoot enable. Disabling S3 is not the cause of #162
2021-11-15 10:41:08 +00:00
f8e7f10ffd
Consistent formatting of GUEST_TWEAKS
2021-11-13 19:07:50 +00:00
20e5b02e43
Disable S3 when SecureBooting Windows on Arch Linux. Close #220
2021-11-13 19:07:30 +00:00
1036cd7ec9
Tune all display devices to have 64MB VRAM. Close #211
...
64MB VRAM is sufficient to run 3840 x 2160 with page flipping., even though qemu support a max of 2560x1600. No need to tune this since 64MB is relatively small in the great scheme of things.
References:
- https://www.ovirt.org/develop/internal/video-ram.html
- https://stafwag.github.io/blog/blog/2018/04/22/high-screen-resolution-on-a-kvm-virtual-machine-with-qxl/
-
2021-11-13 18:52:10 +00:00
95748059b9
Update comments about macOS VirtIO support
2021-11-13 18:18:24 +00:00
6d7b87254c
This adds OMVF support in solus
...
however secureboot in OMVF isn't enabled in solus.
2021-11-13 18:17:21 +00:00
e53021d029
When SPICE is requested, also use SPICE for audio. Close #209
2021-11-13 16:30:56 +00:00
16f379e044
Bump version to 2.3.2
2021-11-13 15:57:50 +00:00
5c490be79a
Correct comment indentation
2021-11-13 15:56:58 +00:00
743b051526
Make shellcheck happy
2021-11-13 15:56:36 +00:00
72704684dd
Replace incorrect references to AuthenticIntel with GenuineIntel #223
2021-11-13 15:53:18 +00:00
e5053ec566
Add USB pass-through and WebDAV via SPICE for macOS. Close #223 Close #196
2021-11-13 15:51:58 +00:00
cff40f8db0
Allocate VRAM for all display devices #211
2021-11-13 15:31:40 +00:00
9197e0c981
Fix seamless mouse via SPICE for macOS by only using VGA. Close #222
2021-11-13 15:30:36 +00:00
d3506d1c4a
Remove disabling S3 (Suspend to RAM). Close #162
2021-11-08 15:11:25 +00:00
b38e220f6c
Do not prevent macOS running when AVX2 is absent. Close #201
2021-11-07 23:51:50 +00:00
979a11ca1b
confused file names
...
added secboot file to non-secboot. whoops. fixed.
2021-11-07 23:26:58 +00:00
c5e8a8e8e2
ovmf_path_gentoo
...
Add Gentoo's paths for OVMF.
2021-11-07 23:26:58 +00:00
2f8b14d2c7
fix for shortcut presumption
2021-11-07 23:24:08 +00:00
87fea6c845
Re-enable networking during Windows installation ( #193 )
...
* Force Windows VMs to use AHCI for the cdrom and hard disk devices.
* Re-enable networking during Windows installation.
2021-11-07 23:20:50 +00:00
8f832a843b
Revert "Rename swtpm socket". Close #192
...
This reverts commit c5efb7d79d
2021-11-01 18:31:57 +00:00
82ea95918d
fix for virtio-vga-gl to be usable
...
See https://github.com/wimpysworld/quickemu/issues/107#issuecomment-951943497
2021-10-30 08:58:35 +01:00
81e8a8db9c
Bump version to 2.3.1
2021-10-29 11:27:02 +01:00
cd908c5a85
Bump version to 2.3.0
2021-10-29 09:51:05 +01:00
66fb440359
Bump version to 2.2.9
2021-10-28 22:44:13 +01:00
528064383b
Add support for QEMU Guest Agent
2021-10-27 22:20:57 +01:00
c5efb7d79d
Rename swtpm socket
2021-10-27 22:20:57 +01:00
6e851ff1c8
Added support for Bridge mode networking. ( #160 )
...
* Added support for Bridge mode networking.
added config file option "bridge"
set to a correctly configured bridge device to enable qemu-bridge-helper
* Added Docs for Bridge network feature
2021-10-27 22:07:14 +01:00
95b5f84816
Bump version to 2.2.8
2021-10-27 15:46:37 +01:00
ea8f459977
Make shellcheck happy
2021-10-27 12:18:10 +01:00
1421492f87
Add initial support for macOS Monterey
2021-10-27 11:56:56 +01:00
5367286915
Unify process related status messages
2021-10-27 11:42:28 +01:00
5c0a7885c9
Reduce wait for swtpm initialisation
2021-10-25 15:57:15 +01:00
835ce6bce5
Minor cleanup
2021-10-25 15:42:33 +01:00
61ac7ad809
Correct typo
2021-10-25 15:42:01 +01:00
205023fd50
Add -display none option. Close #110
...
Using the -display none option will start the VM with SPICE enabled but no display attached. The .ports file in the VM directory can be used to lookup the SSH and SPICE ports used by the VM.
2021-10-25 15:37:17 +01:00
0567229405
Fix VMNAME
2021-10-25 15:14:59 +01:00
ed2ba41cb5
Bump version to 2.2.7
2021-10-25 14:38:33 +01:00
c6659a5b77
Fix shortcuts. Close #141
2021-10-25 14:32:19 +01:00
33adadc988
Make shellcheck happy
2021-10-25 14:31:45 +01:00
3257768677
Derive the absolute VMPATH
2021-10-25 14:31:07 +01:00
91e7e18955
Add support for virtio-vga-gl on QEMU 6.1 and newer. Close #107
2021-10-25 14:03:59 +01:00
4003144cf6
Add ports file. Close #156
2021-10-25 13:40:35 +01:00
5c53dec449
Increase disk_size for macOS and display MSR alerts more often. Close #153
2021-10-25 12:54:41 +01:00
db855be6ed
Fallback to /etc/os-release if lsb_release is not available
2021-10-25 11:17:32 +01:00
23e3da40e3
Remove erroneous EFI_VARS references
2021-10-25 11:17:32 +01:00
0598fb3321
Make sure Legacy boot is in legacy mode
2021-10-25 11:17:32 +01:00
145dc472af
Show full $EFI_CODE path in boot status
2021-10-25 11:17:32 +01:00
207ebde501
Remove test stub
2021-10-25 11:17:32 +01:00
44673e94c6
Add guards for $EFI_CODE and $EFI_VARS
...
Make sure that $EFI_VARS references an actual writable file.
Check if $EFI_CODE reference a symlink, if so resolve the the real file.
2021-10-25 11:17:32 +01:00
ca03a4dada
If EFI boot was requested an no EFI firmware is available, hard stop.
2021-10-25 11:17:32 +01:00
444616022e
Improve error message when no SecureBoot firmware was found.
2021-10-25 11:17:32 +01:00
7a0cf72213
Add reference for Fedora
2021-10-25 11:17:32 +01:00
44bc5faec0
Use the paths to actual firmware on Fedora, rather than to symlinks.
...
Useful reference in this comment: https://bugzilla.redhat.com/show_bug.cgi?id=1929357#c5
2021-10-25 11:17:32 +01:00
9b96f899ad
Make sure cfi.pflash01always has the secure property set
2021-10-25 11:17:32 +01:00
b9f90d12c3
Disable Suspend to RAM (S3) if SecureBoot or SMM are enabled
2021-10-25 11:17:32 +01:00
a4eddaa9e5
Add SMM support, enabled by default for Windows guests
2021-10-25 11:17:32 +01:00
b6db417b81
Refactor OVMF detection and add SecureBoot support
...
Add 'secureboot="on"' to a VM configuration to enable SecureBoot.
2021-10-25 11:16:35 +01:00
aeb2a64720
Add efi_vars() for copying EFI variable store templates to the VM dir
2021-10-25 11:16:35 +01:00
b8d6b02796
Refactor swtpm support to catch when it is missing
...
Also adds the swtpm laucher to the debug shell script.
2021-10-25 11:16:35 +01:00
8bb9003f5a
Halt unless bash 4 or newer
2021-10-21 21:28:13 +01:00
4634212f65
Bump version to 2.2.6
2021-10-21 01:47:03 +01:00
3c2249934a
Disable all disk tuning, for the sake of compatibility. Close #98
2021-10-21 00:33:01 +01:00
32da324717
Correct typo in --ignore-msrs-always argument
2021-10-21 00:28:03 +01:00
936f79590c
Minor comment edit
2021-10-21 00:28:03 +01:00
b915d8d797
Only display MSR alerts when required
2021-10-21 00:28:03 +01:00
a94541c5aa
Order the argument parser
2021-10-21 00:28:03 +01:00
d052d913f9
Order the usage
2021-10-21 00:28:03 +01:00
acf6ef32fa
Add --ignore-msrs-always argument
2021-10-21 00:28:03 +01:00
e493112688
Refactor ignore_msrs_alert to make in non-blocking
2021-10-21 00:28:03 +01:00
119e4dd7ad
White space clean up
2021-10-21 00:28:03 +01:00
af7348caf6
Refactor, and enable, OpenBSD support
2021-10-20 23:22:35 +01:00
94ecb1b3ec
added openbsd 7 support ( #129 )
...
Co-authored-by: Fabian Schmidt <fabian85@protonmail.com>
2021-10-20 22:07:07 +01:00
78b9a3f7f2
Politely offer to set ignore_msrs ( #134 )
...
* attempt to offer appropriate setting of ignore_msrs if needed
* Removed done TODO
* Revert "Removed done TODO"
to resolve merge conflict since all TODOS removed upstream
This reverts commit eb18fcf829
2021-10-20 01:22:45 +01:00
4eb11caa10
Store the pid of the VM
2021-10-19 20:49:57 +01:00
380451df4c
Clean up status messages
2021-10-19 02:17:23 +01:00
fd901a987c
Disable all network interfaces during Windows install. Close #115
...
During the Windows install network interfaces are completely disabled! This is to allow those users who want to create local accounts to do so.
A side affect is that the first time Windows boots with the QEMU network enabled it will blue screen,
automatically restart and then boot normally with fully functioning networking.,
2021-10-19 01:35:25 +01:00
45457c8808
Replace the use of which with command -v
2021-10-18 16:35:48 +01:00
d785c89a38
Add distro, kernel and CPU details to start up messages. Close #96
2021-10-18 16:26:48 +01:00
c3b3f4ee86
Get partial USB SPICE redirection working on macOS. Close #120
2021-10-18 15:33:06 +01:00
2009ffc103
Bump version to 2.2.5
2021-10-16 11:33:57 +01:00
448e8885e7
Unable to start a linux VM.
...
```
qemu-system-x86_64: -device virtio-vga,xres=,yres=: Parameter 'xres' expects uint64
```
This fixes a typo in the name of the variable used to determine a sane resolution for linux guests.
2021-10-16 10:58:56 +01:00
f75c7f402b
Correct status message for killing VMs
2021-10-15 02:46:15 +01:00
cc397fc088
Only try to coerce the screen resolution of Linux guests
...
This feature was originally developed for Linux guests. macOS doesn't honur it and not Windows automatically installs all the required drivers it is not required for Windows either.
2021-10-15 02:44:41 +01:00
f3659e760b
Move 9p mount code outside of the SPICE conditional. Close #85
2021-10-13 04:16:46 +01:00
9de5ea19cf
Correct merge error. Close #83
2021-10-13 03:31:10 +01:00
018fb1c454
Improvments of port scanning. ( #79 )
...
* Fix port scan. Don't send a new line character when scanning.
* Fix port scanning. Possible infinite loop when all range of ports is busy.
Changed port scanning scheme from random to linear because this is the same faster but more predictable.
* Fix port scan. Don't send a new line character when scanning.
echo -n "" for clarity instead of cat < /dev/null
Co-authored-by: navycat <navycat@ultrasparc>
2021-10-09 22:27:47 +01:00
d1afc10857
Detect insufficient RAM for Windows and macOS Close #78
...
Also changes the RAM allocation for the VM to better attempt a working configuration.
2021-10-09 16:51:30 +01:00
5ad176155f
Actually honour requested disk_size
2021-10-09 16:26:06 +01:00
fe86d970ec
Try to ensure PUBLIC_TAG stays under 31 chars
2021-10-09 15:42:42 +01:00
6bc4c6202a
Make shellcheck happy
2021-10-09 15:41:53 +01:00
Martin Wimpress
Phil
Jinming Wu, Patrick
Leonardo Brondani Schenkel
Zach Bacon
Gary Graham
Dani Llewellyn
Martin Wimpress
Blaz
Adam Fairbrother
Jed Spraul
Fabian Schmidt
Phil Clifford
Martin Wimpress
Yannick Mauray
navycatt