---
author: Martin Wimpress
date: February 3, 2023
footer: quickget
header: Quickget User Manual
section: 1
title: QUICKGET
---

# NAME

quickget - download and prepare materials for building a quickemu VM

# SYNOPSIS

**quickget** \[*os*\] \[*release*\] \[*edition*\] \| \[*OPTION*\]\*

# DESCRIPTION

**quickget** will download the requisite materials and prepare a
configuration for `quickemu` to use to build and run

# OPTIONS

**version \| -version \| --version**
:   show version (from Quickemu)

**list \| list_csv \| list_json**
:   provide a csv list of all supported guest OSes, versions and
    variants.

**\[OS\] \[Release\] \[Edition\]**
:   specify the OS and release (and optional edition) if insufficient
    input is provided a list of missing options will be reported and the
    script will exit. Editions may not apply and will be defaulted if
    not provided.

# NOTES

## Ubuntu Guest

`quickget` will automatically download an Ubuntu release and create the
virtual machine configuration.

``` bash
quickget ubuntu 22.04
quickemu --vm ubuntu-22.04.conf
```

-   Complete the installation as normal.
-   Post-install:
    -   Install the SPICE agent (`spice-vdagent`) in the guest to enable
        copy/paste and USB redirection
        -   `sudo apt install spice-vdagent`
    -   Install the SPICE WebDAV agent (`spice-webdavd`) in the guest to
        enable file sharing.
        -   `sudo apt install spice-webdavd`

### Ubuntu devel (daily-live) images

`quickget` can also download/refresh devel images via `zsync` for Ubuntu
developers and testers.

``` bash
quickget ubuntu devel
quickemu --vm ubuntu-devel.conf
```

You can run `quickget ubuntu devel` to refresh your daily development
image as often as you like, it will even automatically switch to a new
series.

### Ubuntu Flavours

All the official Ubuntu flavours are supported, just replace `ubuntu`
with your preferred flavour.

-   `kubuntu` (Kubuntu)
-   `lubuntu` (Lubuntu)
-   `ubuntu-budgie` (Ubuntu Budgie)
-   `ubuntukylin` (Ubuntu Kylin)
-   `ubuntu-mate` (Ubuntu MATE)
-   `ubuntustudio` (Ubuntu Studio)
-   `ubuntu` (Ubuntu)
-   `ubuntu-unity` (Ubuntu Unity)
-   `xubuntu` (Xubuntu)

## Other Operating Systems

`quickget` also supports:

-   `alma` (Alma Linux)
-   `alpine` (Alpine Linux)
-   `android` (Android x86)
-   `archcraft` (Archcraft)
-   `archlinux` (Arch Linux)
-   `arcolinux` (Arco Linux)
-   `batocera` (Batocera)
-   `cachyos` (CachyOS)
-   `centos-stream` (CentOS Stream)
-   `debian` (Debian)
-   `deepin` (Deepin)
-   `devuan` (Devuan)
-   `dragonflybsd` (DragonFlyBSD)
-   `elementary` (elementary OS)
-   `endeavouros` (EndeavourOS)
-   `fedora` (Fedora)
-   `freebsd` (FreeBSD)
-   `freedos` (FreeDOS)
-   `garuda` (Garuda Linux)
-   `gentoo` (Gentoo)
-   `ghostbsd` (GhostBSD)
-   `haiku` (Haiku)
-   `kali` (Kali)
-   `kdeneon` (KDE Neon)
-   `kolibrios` (KolibriOS)
-   `linuxmint` (Linux Mint)
-   `lmde` (Linux Mint Debian Edition)
-   `mageia` (Mageia)
-   `manjaro` (Manjaro)
-   `mxlinux` (MX Linux)
-   `netboot` (netboot.xyz)
-   `netbsd` (NetBSD)
-   `nixos` (NixOS)
-   `openbsd` (OpenBSD)
-   `opensuse` (openSUSE)
-   `oraclelinux` (Oracle Linux)
-   `popos` (Pop!\_OS)
-   `reactos` (ReactOS)
-   `rebornos` (RebornOS)
-   `rockylinux` (Rocky Linux)
-   `slackware` (Slackware)
-   `solus` (Solus)
-   `tails` (Tails)
-   `truenas-core` (TrueNAS Core)
-   `truenas-scale` (TrueNAS Scale)
-   `void` (Void Linux)
-   `zorin` (Zorin OS)

Or you can download a Linux image and manually create a VM
configuration.

-   Download a .iso image of a Linux distribution
-   Create a VM configuration file; for example `debian-bullseye.conf`

``` bash
guest_os="linux"
disk_img="debian-bullseye/disk.qcow2"
iso="debian-bullseye/firmware-11.0.0-amd64-DVD-1.iso"
```

-   Use `quickemu` to start the virtual machine:

``` bash
quickemu --vm debian-bullseye.conf
```

-   Complete the installation as normal.
-   Post-install:
    -   Install the SPICE agent (`spice-vdagent`) in the guest to enable
        copy/paste and USB redirection.
    -   Install the SPICE WebDAV agent (`spice-webdavd`) in the guest to
        enable file sharing.

## macOS Guest

`quickget` automatically downloads a macOS recovery image and creates a
virtual machine configuration.

``` bash
quickget macos catalina
quickemu --vm macos-catalina.conf
```

macOS `high-sierra`, `mojave`, `catalina`, `big-sur` and `monterey` are
supported.

-   Use cursor keys and enter key to select the **macOS Base System**
-   From **macOS Utilities**
    -   Click **Disk Utility** and **Continue**
        -   Select `QEMU HARDDISK Media` (\~103.08GB) from the list and
            click **Erase**.
        -   Enter a `Name:` for the disk
        -   If you are installing macOS Mojave or later (Catalina, Big
            Sur, and Monterey), choose any of the APFS options as the
            filesystem. MacOS Extended may not work.
    -   Click **Erase**.
    -   Click **Done**.
    -   Close Disk Utility
-   From **macOS Utilities**
    -   Click **Reinstall macOS** and **Continue**
-   Complete the installation as you normally would.
    -   On the first reboot use cursor keys and enter key to select
        **macOS Installer**
    -   On the subsequent reboots use cursor keys and enter key to
        select the disk you named
-   Once you have finished installing macOS you will be presented with
    an the out-of-the-box first-start wizard to configure various
    options and set up your username and password
-   OPTIONAL: After you have concluded the out-of-the-box wizard, you
    may want to enable the TRIM feature that the computer industry
    created for SSD disks. This feature in our macOS installation will
    allow QuickEmu to compact (shrink) your macOS disk image whenever
    you delete files inside the Virtual Machine. Without this step your
    macOS disk image will only ever get larger and will not shrink even
    when you delete lots of data inside macOS.
    -   To enable TRIM, open the Terminal application and type the
        following command followed by pressing
        `<kbd>`{=html}enter`</kbd>`{=html} to tell macos to use the TRIM
        command on the hard disk when files are deleted:

``` bash
sudo trimforce enable
```

You will be prompted to enter your account's password to gain the
privilege needed. Once you've entered your password and pressed
`<kbd>`{=html}enter`</kbd>`{=html} the command will request confirmation
in the form of two questions that require you to type
`<kbd>`{=html}y`</kbd>`{=html} (for a "yes" response) followed by
`<kbd>`{=html}enter`</kbd>`{=html} to confirm. If you press
`<kbd>`{=html}enter`</kbd>`{=html} without first typing
`<kbd>`{=html}y`</kbd>`{=html} the system will consider that a negative
response as though you said "no":

``` plain
IMPORTANT NOTICE: This tool force-enables TRIM for all relevant attached devices, even though such devices may not have been validated for data integrity while using TRIM. Use of this tool to enable TRIM may result in unintended data loss or data corruption. It should not be used in a commercial operating environment or with important data. Before using this tool, you should back up all of your data and regularly back up data while TRIM is enabled. This tool is provided on an "as is" basis. APPLE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THIS TOOL OR ITS USE ALONE OR IN COMBINATION WITH YOUR DEVICES, SYSTEMS, OR SERVICES. BY USING THIS TOOL TO ENABLE TRIM, YOU AGREE THAT, TO THE EXTENT PERMITTED BY APPLICABLE LAW, USE OF THE TOOL IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY AND EFFORT IS WITH YOU.
Are you sure you with to proceed (y/N)?
```

And a second confirmation once you've confirmed the previous one:

``` plain
Your system will immediately reboot when this is complete.
Is this OK (y/N)?
```

As the last message states, your system will automatically reboot as
soon as the command completes.

The default macOS configuration looks like this:

``` bash
guest_os="macos"
img="macos-catalina/RecoveryImage.img"
disk_img="macos-catalina/disk.qcow2"
macos_release="catalina"
```

-   `guest_os="macos"` instructs Quickemu to optimise for macOS.
-   `macos_release="catalina"` instructs Quickemu to optimise for a
    particular macOS release.
    -   For example VirtIO Network and Memory Ballooning are available
        in Big Sur and newer, but not previous releases.
    -   And VirtIO Block Media (disks) are supported/stable in Catalina
        and newer.

### macOS compatibility

There are some considerations when running macOS via Quickemu.

-   Supported macOS releases:
    -   High Sierra
    -   Mojave
    -   Catalina **(Recommended)**
    -   Big Sur
    -   Monterey
-   `quickemu` will automatically download the required
    [OpenCore](https://github.com/acidanthera/OpenCorePkg) bootloader
    and OVMF firmware from [OSX-KVM](https://github.com/kholia/OSX-KVM).
-   Optimised by default, but no GPU acceleration is available.
    -   Host CPU vendor is detected and guest CPU is optimised
        accordingly.
    -   [VirtIO Block
        Media](https://www.kraxel.org/blog/2019/06/macos-qemu-guest/) is
        used for the system disk where supported.
    -   [VirtIO `usb-tablet`](http://philjordan.eu/osx-virt/) is used
        for the mouse.
    -   VirtIO Network (`virtio-net`) is supported and enabled on macOS
        Big Sur and newer but previous releases use `vmxnet3`.
    -   VirtIO Memory Ballooning is supported and enabled on macOS Big
        Sur and newer but disabled for other support macOS releases.
-   USB host and SPICE pass-through is:
    -   UHCI (USB 2.0) on macOS Catalina and earlier.
    -   XHCI (USB 3.0) on macOS Big Sur and newer.
-   Display resolution can only be changed via macOS System Preferences.
-   **Full Duplex audio requires [VoodooHDA
    OC](https://github.com/chris1111/VoodooHDA-OC) or pass-through a USB
    audio-device to the macOS guest VM**.
-   NOTE! [Gatekeeper](https://disable-gatekeeper.github.io/) and
    [System Integrity Protection
    (SIP)](https://developer.apple.com/documentation/security/disabling_and_enabling_system_integrity_protection)
    need to be disabled to install VoodooHDA OC
-   File sharing between guest and host is available via
    [virtio-9p](https://wiki.qemu.org/Documentation/9psetup) and [SPICE
    webdavd](https://gitlab.gnome.org/GNOME/phodav/-/merge_requests/24).
-   Copy/paste via SPICE agent is **not available on macOS**.

### macOS App Store

If you see *"Your device or computer could not be verified"* when you
try to login to the App Store, make sure that your wired ethernet device
is `en0`. Use `ifconfig` in a terminal to verify this.

If the wired ethernet device is not `en0`, then then go to *System
Preferences* -\> *Network*, delete all the network devices and apply the
changes. Next, open a terminal and run the following:

``` bash
sudo rm /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
```

Now reboot, and the App Store should work.

## Windows 8.1, 10 & 11 Guests

`quickget` can automatically download Windows 8.1, [Windows
10](https://www.microsoft.com/en-gb/software-download/windows10ISO) and
[Windows
11](https://www.microsoft.com/en-gb/software-download/windows11) along
with the [VirtIO drivers for
Windows](https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/)
and creates a virtual machine configuration.

``` bash
quickget windows 11
quickemu --vm windows-11.conf
```

-   Complete the installation as you normally would.
-   All relevant drivers and services should be installed automatically.
-   A local adminstrator user account is automatically created, with
    these credentials:
    -   Username: `Quickemu`
    -   Password: `quickemu`

### Regional versions

By default `quickget` will download the *"English International"*
release, but you can optionally specify one of the supported languages:
For example:

``` bash
quickget windows 11 "Chinese (Traditional)"
```

The default Windows 11 configuration looks like this:

``` bash
guest_os="windows"
disk_img="windows-11/disk.qcow2"
iso="windows-11/Win11_EnglishInternational_x64.iso"
fixed_iso="windows-11/virtio-win.iso"
tpm="on"
secureboot="on"
```

-   `guest_os="windows"` instructs `quickemu` to optimise for Windows.
-   `fixed_iso=` specifies the ISO image that provides VirtIO drivers.
-   `tpm="on"` instructs `quickemu` to create a software emulated TPM
    device using `swtpm`.

# AUTHORS

Written by Martin Wimpress.

# BUGS

Submit bug reports online at:
<https://github.com/quickemu-project/quickemu/issues>

# SEE ALSO

Full sources at: <https://github.com/quickemu-project/quickemu>

quickemu(1), quickemu_conf(1), quickgui(1)