Replace the hardcoded descriptor entry with dynamic discovery of all device
properties via the Centurion protocol. The headset name, kind, serial,
firmware, and battery are now probed at runtime — matching how the device
actually presents itself rather than relying on static data.
Key changes:
- Discover sub-device features via CentPPBridge and route requests through
the bridge automatically
- Infer device kind from feature IDs (0x06xx = headset) for both wireless
and direct USB connections
- Read device name from USB product string with protocol probe fallback
- Parse bridge error responses (sub_feat_idx=0xFF) instead of timing out
- Handle unknown HID++ error codes gracefully in base.py
- Fix firmware deduplication for Centurion parent devices
- Prefer sub-device serial/firmware over parent (non-printable) values
- Add Centurion-aware display in solaar show with parent/sub-device sections
- Support both wireless (0AF7 dongle) and direct USB (0AF8) connections
Adds support for the Logitech PRO X 2 LIGHTSPEED Gaming Headset (PID 0x0AF7)
which uses the Centurion transport protocol (report ID 0x51 on USB usage page
0xFFA0) instead of standard HID++ report IDs.
Changes:
- HID enumeration: detect Centurion devices via report descriptor parsing
(usage page 0xFFA0, report ID 0x51, 63-byte frames)
- Centurion transport: wrap/unwrap HID++ 2.0 frames in Centurion framing
for write, read, and ping operations
- Feature discovery: enumerate features individually on Centurion devices
(different response format: [remaining_count, feat_hi, feat_lo])
- Device descriptor for PRO X 2 LIGHTSPEED Gaming Headset
- New feature enum entries for Centurion-era headset features (0x06xx)
- CenturionRawRW class for write-only headset settings controlled via
raw Centurion commands reverse-engineered from HeadsetControl
- HeadsetSidetone setting (0-100 range, persisted locally)
Known limitations:
- Only sidetone control is implemented; other features need RE work
- Settings are write-only (no read-back from device)
- Headset features (0x06xx) not discoverable via IRoot; registered manually
* feat: PRO X 2 Superstrike support with click haptics, actuation point and rapid trigger config support
* feat: PRO X 2 Superstrike docs
* docs: document PRO X 2 Superstrike features, device entry, and capabilities
* fix: code review points
# Conflicts:
# lib/logitech_receiver/hidpp20_constants.py
* Fix the write_key_value for dpi_extended
I was playing with the branch from the MR and I wanted to fix the cli stuff, it now properly sets when I use:
solaar config 1 dpi_extended X 400
Should be enough
Signed-off-by: Shane Fagan <mail@shanefagan.com>
* Fix ruff style check
---------
Signed-off-by: Shane Fagan <mail@shanefagan.com>
Co-authored-by: Shane Fagan <mail@shanefagan.com>
* Bulgarian PO files
Български превод на приложението
* Delete bg.mo
* Delete bg.po
* Delete bg.po~
* Bulgarian Translation
Български превод на приложението.
* Update i18n.md
* Delete po/bg.mo
* Delete po/bg.po~
* Add installation guide for Solaar on RHEL 10
Document steps to install and run Solaar on RHEL 10, including environment setup and troubleshooting.
* Add interactive RHEL installer script
Replace scripts=glob("bin/*") with entry_points console_scripts
to make solaar installable via pipx. pipx requires packages to
define console_scripts entry points to detect command-line apps.
* Skip Logitech webcams (PID 0x0800 to 0x09FF) to prevent them from locking up during hidpp checks #3145
* Skip Logitech webcams (PID 0x0800 to 0x09FF) to prevent them from locking up during hidpp checks #3145 - format comment
* Skip Logitech webcams (PID 0x0800 to 0x09FF) to prevent them from locking up during hidpp checks #3145 - format hex
* Skip Logitech webcams from hidpp checks #3145 - local constant for LOGITECH_VENDOR_ID as per code review
Ken Sanislo
Caio Quirino da Silva
Nikolay Yordanov
Ken Sanislo
Peter F. Patel-Schneider
Grant Scott Turner
gnotree ✟🕊︎
Br1an67
Niko Savola
Din Tort
NaviMen
aasami
Mário Victor Ribeiro Silva
daviddavid
Ekaterine Papava
Nick
Daniel Nylander
Peter Dave Hello