60 lines
2.6 KiB
Markdown
60 lines
2.6 KiB
Markdown
---
|
|
title: Manual Installation
|
|
layout: page
|
|
---
|
|
|
|
# Manual installation
|
|
|
|
### Requirements
|
|
|
|
You should have a reasonably new kernel (3.2+), with the `logitech-djreceiver`
|
|
driver enabled and loaded (kernel module `hid-logitech-dj`) or Linux 3.19+
|
|
(kernel module `hid-logitech-hidpp`); also, the `udev` package must be installed
|
|
and the daemon running. If you have a modern Linux distribution (2011+), you're
|
|
most likely good to go.
|
|
|
|
The command-line application (`bin/solaar-cli`) requires Python 2.7.3 or 3.2+
|
|
(either version should work), and the `python-pyudev`/`python3-pyudev` package.
|
|
|
|
The GUI application (`bin/solaar`) also requires Gtk3, and its GObject
|
|
Introspection bindings. The Debian/Ubuntu package names are
|
|
`python-gi`/`python3-gi` and `gir1.2-gtk-3.0`; if you're using another
|
|
distribution the required packages are most likely named something similar.
|
|
If the desktop notifications bindings are also installed (`gir1.2-notify-0.7`),
|
|
you will also get desktop notifications when devices come online/go offline.
|
|
|
|
For gnome-shell/Unity support, you also need to have `gir1.2-appindicator3-0.1`
|
|
installed.
|
|
|
|
|
|
### Installation
|
|
|
|
Normally USB devices are not accessible for r/w by regular users, so you will
|
|
need to do a one-time udev rule installation to allow access to the Logitech
|
|
Unifying Receiver.
|
|
|
|
You can run the `rules.d/install.sh` script from Solaar to do this installation
|
|
automatically (make sure to run it as your regular desktop user, it will switch
|
|
to root when necessary), or you can do all the required steps by hand, as the
|
|
root user:
|
|
|
|
1. Copy `rules.d/42-logitech-unifying-receiver.rules` from Solaar to
|
|
`/etc/udev/rules.d/`. The `udev` daemon will automatically pick up this file
|
|
using inotify.
|
|
|
|
By default, the rule allows all members of the `plugdev` group to have
|
|
read/write access to the Unifying Receiver device. (standard Debian/Ubuntu
|
|
group for pluggable devices). It may need changes, specific to your
|
|
particular system's configuration. If in doubt, replacing `GROUP="plugdev"`
|
|
with `GROUP="<your username>"` should just work.
|
|
|
|
2. Physically remove the Unifying Receiver and re-insert it.
|
|
|
|
This is necessary because if the receiver is already plugged-in, it already
|
|
has a `/dev/hidrawX` device node, but with the old (`root:root`) permissions.
|
|
Plugging it again will re-create the device node with the right permissions.
|
|
|
|
3. Make sure your desktop users are part of the `plugdev` group, by running
|
|
`gpasswd -a <desktop username> plugdev`. If these users were not assigned to the
|
|
group before, they must re-login for the changes to take effect.
|