2fdce2f938
Add range features
2016-06-09 19:46:03 +02:00
f1fad2d16b
Add range validator
2016-06-09 19:46:03 +02:00
e046455a05
Fix: "AppIndicator3 was imported without specifying a version first"
...
PyGIWarning: AppIndicator3 was imported without specifying a version
first. Use gi.require_version('AppIndicator3', '0.1') before import to
ensure that the right version gets loaded.
2016-05-03 20:20:46 +01:00
ddbc27486c
Merge pull request #136 from erik-smit/gobject_not_allow_None
...
Fixes a TypeError on older GObject libraries (as evident with Ubuntu 12.04 and OpenSUSE 12.3).
2016-04-17 14:11:15 +02:00
2041007b38
Merge branch 'features'
...
Automatically detect FN swap feature and DPI adjustment on some newer
devices. DPI adjustment partially addresses support for the MX Master
(#208 ), Smart shift is still missing.
2016-04-17 12:43:15 +02:00
883ed9549d
Fix DPI list assertion
2016-03-25 00:06:00 +01:00
d1858f747b
Assume 7 words for the DPI list response
...
HID++ 2.0 responses are 20 bytes, once you strip the 4 byte common
header and 1 byte sensorIdx, you have 15 bytes left. Since DPI values
are 16-bit words, only 14 bytes should be used.
2016-03-24 16:59:05 +01:00
aa7d1b6410
Skip sensorIdx in getSensorDpiList response
2016-03-24 15:13:06 +01:00
5b01f375e0
Merge pull request #254 from emerham/master
...
Adding Logitech mx 1100 cordless laser mouse to discriptors
2016-03-24 14:56:55 +01:00
dd2755909d
cli/config: fix error message
...
Attempt to fix:
$ bin/solaar config master dpi higher
solaar: error: coercing to Unicode: need string or buffer, int found
The DPI choices are integers, therefore cast it to a str.
2016-03-18 12:27:16 +01:00
b052ab9ef0
Fix thinko in Adjustable DPI setting
...
There are three bytes forming the parameter, the sensor ID is the MSB,
not LSB.
2016-03-18 12:14:15 +01:00
9c768d60a1
Add full support for adjustable DPI
...
Feature 0x2201 as used by the MX Master. Valid DPI values are read
directly from the device. Based on Logitech specifications.
2016-03-15 23:37:39 +01:00
d1d0ab85ff
Updated mouse device settings and deffinition. Added docs for the MX 1100
2016-03-14 13:05:05 -07:00
e1eee2e078
Fix "Gtk was imported without specifying a version first"
...
Fixes the following warnings:
sys:1: PyGIWarning: Gtk was imported without specifying a version first. Use gi.require_version('Gtk', '3.0') before import to ensure that the right version gets loaded.
sys:1: PyGIWarning: Notify was imported without specifying a version first. Use gi.require_version('Notify', '0.7') before import to ensure that the right version gets loaded.
2016-03-14 11:33:05 +01:00
5c38f90cd6
Merge branch 'issue/199'
...
Fixes #136 .
2016-03-14 11:10:49 +01:00
45d49b9de8
settings: fix Python 3 compat for boolean values
...
As observed for the fn-swap setting.
2016-03-14 01:48:56 +01:00
ab162583e4
cli: do not die on missing description
...
The DPI setting has no description, do not try to display it.
2016-03-13 23:59:21 +01:00
63a98819a6
Don't open a main window when battery is critical
...
The main window suddenly opening when a battery is critical is very
disruptive. It can pop up on all sort of undesirable scenarios.
Rather than catch users of guard, merely show a notification that the
battery is critical.
2016-02-19 03:25:55 -03:00
478381a994
add: wpid for M 175 to distinguish between it and M185 wireless mouse
...
I own the former and wanted to correct this detail which caused the wrong
model to be shown in GUI.
Signed-off-by: Stephen Lyons <slysven@virginmedia.com>
2016-02-10 19:09:25 +00:00
51a15a960f
Adding Logitech mx 1100 cordless laser mouse to discriptors
2016-01-26 11:04:47 -08:00
92967eed23
Merge pull request #249 from mulkieran/master-pyudev
...
Fix some bugs in udev.get_indexed_string.
2016-01-13 15:24:51 +01:00
d75b6d2f2b
Fix some bugs in udev.get_indexed_string.
...
* from_device_number raises an exception if no device found, rather than
returning None. So, instead of checking the result, catch the exception.
* Use Attributes.get() method instead of checking containment and using the
index operator. This is really the only correct way, see rhbz#1267584.
Effect of the changes:
Previously, if no device was found this method would raise an exception.
Now it returns None instead.
Previously this method read the value of the attribute corresponding to key
twice, once via 'key in attributes' and again when accessing the key.
Now, it just reads it the one time.
Reason for noticing all these problems:
In pyudev-0.18 the Attributes class is fixed, and no longer has the []
operator or __contains__ method or other methods which require a total
mapping. This patch fixes several bugs while simultaneously avoiding these
removed operators.
Signed-off-by: mulhern <amulhern@redhat.com>
2015-12-23 09:22:48 -05:00
15f97681ef
Add setting for K400 Plus keyboard
...
The new_fn_swap works on the K400 Plus model.
2015-08-24 19:01:21 +02:00
5ba816dd38
[WIP] Support MX Master with DPI adjustment support ( #208 )
...
It's not known whether the DPI ranges can be queried, so let's set
hard-code some values for now. Step size is 200. Does this need to
be changed?
TODO: need a capture of whether this is really a read function.
2015-05-31 15:53:26 +02:00
a515cc3860
Auto-detect FN swap feature for newer devices
2015-05-31 10:56:57 +02:00
73344cbf26
Simplify feature checking
...
Make mapping features to settings more readable. No functional changes.
2015-05-31 10:38:49 +02:00
cf27328d13
Merge branch 'updates'
...
Documentation updates.
2015-05-27 23:43:10 +02:00
e2d65a690e
hidpp20: update features list
...
Based on SetPoint6.65.62_32.exe and Options_2.10.73.exe (features.xml,
defaults.xml, LogiOptionsMgr.exe).
The names are based on the named next to the feature ID. For duplicates,
_2 is appended to the name.
This commands helps parsing numbers from debug prints:
strings LogiOptionsMgr.exe |
sed -nr 's/.*(Feature[0-9a-fA-F]{4})/\1 /p' | sort |
awk 'tolower(a)!=tolower($1){print"";a=$1}1;' | less -S
2015-05-27 23:20:43 +02:00
3141f06472
Fix crash due to non-locatable icon names ( #199 )
2015-05-27 23:16:39 +02:00
76e327d2fa
update docs for M325
2015-05-08 13:27:29 +08:00
0ae0ef195a
support switch smooth scroll feature
2015-05-08 13:20:46 +08:00
3ea51fe1a2
Add support for MK220 mouse-keyboard combo device.
...
The MK220 receiver has usbid 046d:c52e, adding this id as a generic
receiver is enough to show the mouse and keyboard charge status.
2015-03-06 08:07:22 -03:00
66296265ba
Descriptor for k830.
2015-03-05 19:15:12 +01:00
952495ce04
Support for NEW_FN_INVERSION.
2015-03-05 19:14:28 +01:00
2b08c5e0c9
Added border around tree view.
2014-01-01 21:45:44 -05:00
437e17cf37
Added Italian translation
2013-12-13 18:09:46 +01:00
9a6cdd9cee
TypeError: Argument 3 does not allow None as a value
2013-10-31 11:16:38 +01:00
8485494ea7
It should check for None specificly
2013-09-25 14:12:53 +02:00
7a75813a84
level is returned as None in hidpp10.py when the performanceMX mouse is
...
charging. Since the battery state is unknown when beeing recharged it
will now return "N/A".
Before it would crash becasue level was None and could not be inserted
using %d.
2013-09-24 16:56:50 +02:00
1434b2a50d
Update features and keys list
...
Updated to information available from SetPoint 6.61.15.
2013-08-27 17:55:45 +02:00
c3fdbfb643
translate battery alerts ( fixes #119 )
2013-08-25 23:03:25 +03:00
b193b39701
Fix missing reprogrammable keys
...
The assumption that the Features IDs are in increasing order does not
hold. This causes the feature check for REPROG CONTROLS (1B00) to fail,
therefore remove the micro-optimisation.
While at it, rename variables and document the functions better.
2013-08-23 21:33:45 +02:00
9c465cd998
Fix wrong register name for illumination (hidpp10)
...
Broken since 9a2a28e
2013-08-21 21:47:24 +02:00
024a71b618
solaar: add --hidraw option again
...
This options allows the devices list to be restricted which got removed
in:
commit 3b75b69970
2013-08-21 21:47:24 +02:00
f144816256
solaar-cli: fix argument parsing in Python 3 again
...
Fix from e3a887f36c3b75b69970
2013-08-21 21:47:24 +02:00
69febfcea5
don't rely on upower to check devices after wake-up ( #111 )
...
still use upower resume events to ping devices, just in case
the old behaviour is available with a command-line option
2013-08-12 15:22:34 +02:00
9934755566
more translation fixes ( #108 )
2013-08-12 00:32:19 +02:00
3b75b69970
merged solaar-cli functionality into main solaar binary
2013-08-09 12:25:47 +02:00
a4f0eab855
updated descriptors with a few more devices
2013-08-08 22:44:23 +02:00
f54ea27d97
updated translator credits in about dialog
2013-08-08 22:43:32 +02:00
db48fe1b40
re-formatted translation files
2013-08-08 22:41:57 +02:00
5faecbf4f3
some strings were untranslated; fixes #100
2013-08-08 21:50:04 +02:00
5af1719384
tray: always pick the lowest battery, if the user hasn't already
2013-08-08 21:49:59 +02:00
6a66370ffe
scrolling over the tray icon switches among devices; fixes #101
...
It now works for the standard systray as well, not just the
appindicator.
2013-08-08 21:49:54 +02:00
c0874220d2
don't str() translated device status; fixes #108
2013-08-08 21:49:50 +02:00
22656d5b82
use Gtk.Application properly
2013-08-08 21:49:35 +02:00
d55963caba
clean-up in usb IDs
2013-08-08 21:49:35 +02:00
413cebe40f
delay some UI initialization until necessary
2013-08-08 21:49:35 +02:00
edc563e0e4
release 0.9.2
2013-07-24 11:40:54 +02:00
969ca59948
translation credits: order languages alphabetically
2013-07-24 11:39:45 +02:00
c97f4082dd
translation credits updated
2013-07-23 22:49:47 +02:00
3d4570cd1f
check the Gtk bindings version at start-up
2013-07-20 06:22:15 +02:00
b6bc35ed3e
K800: added support for hand detection
2013-07-19 11:49:30 +02:00
5d4d0c07ad
use () instead of [] where possible
2013-07-19 11:48:40 +02:00
15cb97c56e
udev devices may not have all the attributes; fixes #93
2013-07-19 11:46:50 +02:00
fcfc7cd6fc
a few more asserts in descriptors
...
just testing stuff...
2013-07-18 20:38:05 +02:00
c3718d22d6
minor clean-ups
2013-07-18 20:36:27 +02:00
2829acd6f5
added side-scrolling toggle setting
2013-07-18 20:35:39 +02:00
c35ae8ffc9
added wpid to T650 descriptor
2013-07-18 20:34:29 +02:00
f7159e9338
properly mask flags when writing device settings; fixes #86
2013-07-18 20:33:52 +02:00
4074fb7750
trim the codename to the declared length ( fixes #90 )
2013-07-18 16:23:34 +02:00
444169d84b
added descriptor for V550 Nano
2013-07-18 15:26:53 +02:00
5d5f97a776
Gtk.Application.get_dbus_object_path my be missing
2013-07-18 14:06:51 +02:00
a8c5d3bc24
Nano receivers were unsupported on kernel 3.2; fixes #88
2013-07-18 14:01:36 +02:00
a3f9860181
added descriptor for V450 Nano; fixes #89
2013-07-17 20:02:31 +02:00
1fed000855
added wpid to M515 desccriptor
2013-07-17 19:54:28 +02:00
61dfefde94
internationalized most strings; fixes #79
...
some might have slipped through the cracks
2013-07-17 19:53:21 +02:00
a4c0ad3d73
added M345 descriptor info
2013-07-16 12:51:01 +02:00
38c76393b1
added copyright notices to all source files
2013-07-15 17:54:42 +02:00
ce9b10dc2d
started i18n support
2013-07-15 17:16:44 +02:00
16af3a9acc
version 0.9.1
2013-07-13 11:24:41 +02:00
c690b2c9e9
minor descriptors clean-up
2013-07-13 11:15:23 +02:00
43ab629a26
moved logitech.unifying_receiver package to logitech_receiver
2013-07-12 22:48:09 +02:00
b83a14e16f
minor clean-ups and formatting
2013-07-12 22:39:17 +02:00
a966bbff6f
fixed handling of protocol version when the device is offline
2013-07-12 22:23:03 +02:00
141a5c3dee
don't ping devices known to be offline
2013-07-12 22:07:58 +02:00
994bb07bc4
descriptors updated
2013-07-12 21:55:32 +02:00
24f658d8fe
support multiple Wireless PIDs for same device model
2013-07-12 21:53:23 +02:00
49d77a2f90
handle unknown devices slightly better
2013-07-12 20:30:46 +02:00
d78c7ed9be
make sure items in window tree are sorted by number ( fixed #73 )
2013-07-12 15:24:49 +02:00
51d0ccf654
only popup the window once per device on battery alerts
2013-07-12 14:35:16 +02:00
9c8252b59f
on alert popups, selected the device that triggered the popup
2013-07-12 14:10:26 +02:00
488a78cc52
fixed #75 (pair button disappearing)
2013-07-12 10:35:28 +02:00
0e6d088372
fixed some awkward path joining stuff
2013-07-11 22:46:29 +02:00
948b4c4d51
updated descriptors and devices doc for Anywhere MX
2013-07-11 15:34:36 +02:00
85efe92d30
replaced appinstance with GtkApplication
2013-07-09 17:52:07 +02:00
c0a7838429
version 0.9.0
2013-07-09 14:42:46 +02:00
eda4112501
removed obsolete old window code
2013-07-08 21:21:53 +02:00
dbb9025e26
replaced _ dummies with _ignore
2013-07-08 21:21:14 +02:00
beee0bc8c2
typo in comment
2013-07-08 20:51:30 +02:00
1be56dd072
version 0.8.99.12
2013-07-07 21:58:33 +02:00
d0b8233c9a
minor clean-up
2013-07-07 21:40:55 +02:00
39534d11dd
make sure all debug and info loggings are if-guarded
2013-07-07 17:18:42 +02:00
ca2f5f927c
configuration: save on every change ( fixes #80 )
2013-07-07 16:06:27 +02:00
8b26759731
release 0.8.99.11
2013-07-07 14:04:11 +02:00
7221ceb7b4
forget battery status when the device has been offline for too long
2013-07-07 12:23:58 +02:00
66416ff4cc
fixed parsing of custom battery messages
2013-07-07 12:23:23 +02:00
0d89d1e6c8
formatting fix in unpairing error dialog
2013-07-07 01:31:22 +02:00
94d07eed53
version 0.8.99.10
2013-07-06 14:35:34 +02:00
508444526a
commented-out the poll-ticking feature
...
not useful right now, and less code to worry about
2013-07-06 14:23:56 +02:00
faa6de3b75
more explicit error dialogs, when possible
2013-07-06 14:20:50 +02:00
77d2ae5249
omit the date in logging, is not important and the lines are shorter
2013-07-06 14:20:12 +02:00
e2f94a9e0e
be more lax as to when to allow pairing new devices
2013-07-06 13:55:22 +02:00
ba55e4d9bd
import * cleanups
2013-07-05 16:19:49 +02:00
8e9ff939f3
hidconsole: enable hidpp automatically when talking to a Logitech Recevier
2013-07-05 16:19:24 +02:00
bd3198f6f0
correctly handle out-of-process pairing and unpairing
2013-07-05 16:06:38 +02:00
3319feeb73
replaced type() with isinstance() where possible
2013-07-05 16:02:38 +02:00
47bcd4478c
prettier error message if unpair fails
2013-07-05 14:35:06 +02:00
065b8628d2
don't always show Notifications in details
2013-07-05 14:34:37 +02:00
87e2f1cad7
solaar-cli: clearer handling of invalid device numbers
2013-07-05 14:34:18 +02:00
373b07f271
fixed pairing in solaar-cli
2013-07-05 14:33:58 +02:00
58f598fc88
version 0.8.99.9
2013-07-04 13:49:48 +02:00
8f44c294d7
still getting strange messages from some devices
2013-07-04 13:37:39 +02:00
f65079ad6d
formatting fix for notifications
2013-07-04 13:35:23 +02:00
edce56cd20
use a single separate thread for all possibly long-running stuff in GUI
2013-07-04 13:23:25 +02:00
cd437c3809
only set NOTIFICATION_FLAGS for 1.0 devices
2013-07-04 13:22:35 +02:00
007cbef086
better coverage of incoming events
2013-07-04 13:20:00 +02:00
a03cc9ce64
more chair switching -- moved notifications handling into own .py
2013-07-03 08:21:40 +02:00
3275aa4c12
allow most receivers to unpair (or at least try)
2013-07-03 08:18:47 +02:00
a0f880fbba
fix for NoneType crash
2013-07-02 19:43:18 +02:00
833f087fdf
also show polling rate in Hz
2013-07-02 12:23:47 +02:00
9a2a28e0aa
replaced hard-coded register numbers with constants
...
also re-worked the battery reading code a bit
2013-07-02 12:23:12 +02:00
bf5fc42f07
fixed duplicate entries in keyboard tasks
2013-07-02 00:40:34 +02:00
fb495fd2fc
version 0.8.99.8
2013-07-01 19:35:46 +02:00
90ab7af069
Anywhere MX and M600 descriptor updates
2013-07-01 19:22:46 +02:00
3436055c7f
re-worked (AGAIN) the way the devices are initially set-up
...
There is absolutely no consistency between the registers and
features receivers have, even if they're the same product_id!
2013-07-01 19:00:26 +02:00
20aa797e96
configuration: use wpid in device key
2013-07-01 18:53:10 +02:00
5ebc2634ae
(hopefully) better serial read-out for devices
2013-07-01 18:40:03 +02:00
94464a40b8
show the battery charge in the devices tree, if available ( fixes #71 )
2013-07-01 18:39:17 +02:00
1194abf125
don't know yet how to tell if the receiver supports the unifying protocol
2013-07-01 15:28:05 +02:00
ceba698678
moved settings templates into separate .py
2013-07-01 15:24:30 +02:00
b1e9480f5a
minor logging tweaks
2013-07-01 15:00:21 +02:00
eaa38c858c
properly format battery status string for 0x07 devices
2013-07-01 11:51:20 +02:00
4504045bc6
extended descriptor for M305
2013-07-01 11:49:44 +02:00
a9ea69b9a1
more explicit error message when trying to pair uncompatible devices
2013-07-01 11:41:47 +02:00
9a8d089c73
handle some mystery data packets from older devices
2013-07-01 11:34:54 +02:00
0d56cfbded
clean-up in get/set notification flags computation
2013-06-30 17:12:44 +02:00
9896875180
cleaner import
2013-06-30 15:03:39 +02:00
a1c04ce39f
renamed 'leds' register to '3leds', in case other may be found later
2013-06-30 15:02:58 +02:00
da541e000a
put usb ids into separate py file
2013-06-30 14:34:53 +02:00
e490162e4f
the K400 also has the FN swap feature
2013-06-30 14:04:14 +02:00
a0b7d39f83
use the wpid to identify devices, when possible
2013-06-30 13:49:35 +02:00
c464e049bf
allow settings to be bound to certain device types
...
avoids stuff like smooth-scroll being attached to a keyboard
2013-06-29 21:26:25 +02:00
daad9b5d5f
cleaned-up NamedInts, added int2bytes and bytes2int generic functions
2013-06-29 20:37:04 +02:00
2682722cb1
cleaned-up config_panel code
2013-06-29 20:35:35 +02:00
8d5718178f
load the configuration when the device is detected
...
and apply it every time the device comes online
2013-06-29 20:35:02 +02:00
1d438f098f
handle 0x07 battery notifications with indicating charging, but with no battery level
2013-06-29 20:26:29 +02:00
1d305db29e
minor UI layout tweaks
2013-06-29 19:02:19 +02:00
c2a549c114
the K800 also has 3 leds, use them to indicate battery charge
2013-06-28 17:09:05 +02:00
f43e298ac7
clean-up configuration on load and save
2013-06-26 16:05:14 +02:00
c25b769578
repr() formatting cleanups
2013-06-26 13:40:46 +02:00
0cf1f1983d
handle backlight notifications from register 0x17
2013-06-26 13:38:36 +02:00
39ec568ab1
descriptors table and devices documentation updated
2013-06-25 18:54:27 +02:00
5b94ebae34
enable the backlight notifications on devices, if available
2013-06-25 18:53:18 +02:00
ff6da43007
version 0.8.99.7
2013-06-25 16:08:47 +02:00
fc5c72e164
some clean-ups in descriptors
2013-06-25 16:01:29 +02:00
bd5c03812f
replaced solaar png icons with svgs
2013-06-25 15:59:49 +02:00
6b0b7ea823
minor clean-ups and formatting
2013-06-24 17:04:19 +02:00
dd24ed5fe0
brought solaar-cli in sync with the latest gui code
2013-06-24 17:02:45 +02:00
f64942b51d
if the battery level is approximative, show a string instead of percentage
2013-06-24 17:02:00 +02:00
375db9996f
fixed reading correct device kind on link notification
2013-06-24 16:58:41 +02:00
20dfc063ff
initial support for performance mx leds
...
The leds light up when we get updates about the battery level.
Right now they are not (programatically) turned off.
2013-06-23 20:59:16 +02:00
70c341e268
don't use proxies for receiver/device objects
...
they should be unnecessary now that their status is properly tracked
2013-06-23 18:37:50 +02:00
dc59c79bd3
properly handle tree re-selection when removing a receiver
2013-06-23 18:35:23 +02:00
422cd26b92
some extra asserts on hid++ 1.0 register r/w
2013-06-23 18:16:13 +02:00
cec892ce88
disable poll ticking
...
It was necessary to periodically check if the peripherals are still
online -- suspend/resume may cause Solaar to (wrongfully) remember the
status of devices after a resume.
Now that is handled by the optional upower module -- the hard way -- by
restarting all listeners on resume.
2013-06-23 18:15:19 +02:00
d5374b9f51
optionally listen for upower suspend/resume events to stop/start all receiver listeners
2013-06-23 18:11:42 +02:00
51e2d965cf
version 0.8.99.6
2013-06-23 15:46:16 +02:00
b3aac40246
dropped activate_on_single_click, requires gtk 3.8
2013-06-23 13:44:34 +02:00
fb138b77ff
version 0.8.99.5
2013-06-23 13:09:44 +02:00
273284da39
use number instead of serial to pick devices in ui (faster start-up)
2013-06-23 12:09:46 +02:00
7102229937
properly handle ^C in console
2013-06-22 21:32:19 +02:00
be80ba3b3b
version 0.8.99.4
2013-06-21 22:27:18 +02:00
4410cb6dc6
comment-out old main window
2013-06-21 22:25:04 +02:00
df8df2bffa
don't force a battery read on link active, will happen anyway
2013-06-21 22:24:28 +02:00
ae4c921300
cleaner start-up of paired devices
2013-06-21 22:23:53 +02:00
3d1aa6698d
only check for non-unifying protocol only on nano receviers
2013-06-21 22:19:31 +02:00
613b115eb4
fixed clean-up of config panel when unpairing devices
2013-06-21 16:51:39 +02:00
e19b690bd5
fixed reading of polling rate
2013-06-21 16:47:19 +02:00
888be8e8a8
be a bit more patient when pairing, the device notification may come after the pairing lock is closed
2013-06-21 16:40:00 +02:00
5785896007
status: the device may be invalid when processing the unpair notification
2013-06-21 16:39:30 +02:00
8d522de7e7
drop some unnecessary logging when ignoring request replies
2013-06-21 16:39:04 +02:00
81ae4c8d4d
forgot about pairing notification on receiver...
2013-06-21 16:32:29 +02:00
8cd3b8fdef
save configuration a little early, better timing on shutdown
2013-06-21 15:21:49 +02:00
c1aa341a7a
tweaked timing of enabling receiver notifications
2013-06-21 15:20:52 +02:00
f9c192c47a
only look for a different tray battery icon if the changed device is a peripheral
2013-06-21 15:19:07 +02:00
cdc6da844e
made the config_panel self-contained
2013-06-21 15:18:21 +02:00
fd35f23af7
one a separate flag to check if the device is active
2013-06-21 15:17:14 +02:00
c04851f64e
better handling of timeouts in base.request
2013-06-21 15:05:48 +02:00
3a63c3ad43
fixed reading encrypted link status in pairing window
2013-06-21 15:04:06 +02:00
431f1c97cf
added read/write_register to receiver and devices
2013-06-21 15:03:36 +02:00
1b68a3d5a9
fixed request timeouts for devices
2013-06-20 19:51:54 +02:00
c797808a40
fixed status keys in pairing
2013-06-20 19:35:54 +02:00
d810ccba84
tray icon: pick the battery of the lowest _active_ device
2013-06-20 17:25:53 +02:00
2fea5d9af2
disable the unpair button for peripherals of a Nano receiver
2013-06-20 17:21:58 +02:00
1d9a3bf23a
fixed checking for features of offline 2.0 devices
2013-06-20 17:21:23 +02:00
3d8c764eb0
relax timeouts for device requests
2013-06-20 17:13:49 +02:00
eb317f0d46
version 0.8.99.2
2013-06-20 14:49:02 +02:00
27de1aea11
tray/window: append new devices rather than inserting them at the top
2013-06-20 14:43:49 +02:00
92f7e761ee
don't save the configuration if it hasn't been loaded first
2013-06-20 14:27:18 +02:00
b2f1786eff
use consistent naming of offline state for devices
2013-06-20 14:18:36 +02:00
f8369e7c63
properly style the details panel
2013-06-20 14:18:03 +02:00
f095a74f2a
make the main window a regular window (visible in tasks list)
2013-06-20 13:51:42 +02:00
4e3fccb009
fixed sizing of details panel
2013-06-20 13:41:05 +02:00
31e134c1e0
don't wait so long on the first idle poll
2013-06-20 13:12:29 +02:00
47e22b788f
version 0.8.99, will become 0.9 on release
2013-06-20 13:12:12 +02:00
798628fdf8
add the USB id for the receiver in the details panel
2013-06-20 13:10:55 +02:00
ca9825d262
support for the VX Nano mouse
2013-06-20 13:10:30 +02:00
1a36ec65ee
faster checking of feature-based settings
2013-06-20 12:55:48 +02:00
d07a20e6f8
improved reading device properties
2013-06-20 12:54:27 +02:00
783b317281
added a protocol field to the device descriptors
2013-06-20 11:04:17 +02:00
4bc525f250
minor clean-ups
2013-06-20 11:02:45 +02:00
11cfc7ea09
enable notification on recevier as soon as possible
2013-06-19 19:46:54 +02:00
a806f2672d
group all status keys into one object
2013-06-19 19:45:39 +02:00
2fee88e54b
fixed battery charge display in device info
2013-06-19 19:23:18 +02:00
7e1a2a6e4f
more fixes for device unpairing
2013-06-19 17:21:28 +02:00
d5b311760e
clean obsolete settings controls when devices are unpaired
2013-06-19 17:04:01 +02:00
dffe6f8b91
fix display of firmware in details panel
2013-06-19 17:03:16 +02:00
b4bca4670b
cache notification flags when possible
...
avoids unnecessary reads from devices when the status hasn't changed
2013-06-19 17:03:01 +02:00
150c43f41f
some logging in udev
2013-06-19 16:49:20 +02:00
9fc11df229
fixed window update when unpairing
2013-06-19 16:22:44 +02:00
56a7a960c3
polling: it may happen that the receiver is removed mid-poll
2013-06-19 16:14:04 +02:00
cd44cc6396
new single-window UI
2013-06-19 15:28:13 +02:00
4af714f1dd
K750: register the FN swap setting statically, no need to detect it at runtime
2013-06-18 16:48:02 +02:00
836719587c
renamed NANO receiver id
2013-06-18 16:45:44 +02:00
f32e958984
version 0.8.9.4
2013-06-17 16:12:32 +02:00
57c759773a
attach configuration to device settings objects
2013-06-17 11:00:53 +02:00
9d6402a4f7
shorter thread name on receiver listener
2013-06-17 08:00:17 +02:00
a29609df21
only save the configuration once when Solaar ends
2013-06-17 08:00:00 +02:00
04ea8293a8
persist and restore device settings
2013-06-16 17:41:03 +02:00
bde54aba3b
proper shutdown of receiver listeners
2013-06-16 17:10:46 +02:00
a44d9b7ca8
fix battery display in main window
2013-06-16 17:10:46 +02:00
febf571d84
account for devices going out-of-range while active
2013-06-16 17:10:46 +02:00
8852d50971
mark device status as inactive after idling out
2013-06-12 14:31:46 +02:00
03e20842fb
cleaned-up gtk ui initialization
2013-06-12 14:29:34 +02:00
d9801e2d57
fixed firmware info for some HID++ 2.0 devices
2013-06-12 14:21:31 +02:00
29fe913fd8
version 0.8.9.3
2013-06-08 21:11:39 +02:00
5b68f9623e
fix indicator description when there are receivers but no devices
2013-06-08 21:10:17 +02:00
2a6662472d
account for all GLib.id_add_watch variants
2013-06-08 21:07:24 +02:00
5cf6777340
more tweaks to idle polling
2013-06-08 21:06:52 +02:00
17863c85b6
fixed querying for known registers
2013-06-08 21:06:22 +02:00
237d0f9d9a
keep the battery level if polling the device marks it as offline
2013-06-08 21:05:30 +02:00
b98e27e464
fix permissions error popup
2013-06-08 21:04:32 +02:00
d01d9edb78
tweaked idle polling timings
2013-06-08 16:27:03 +02:00
0a86683392
clean-up in solaar.listener
2013-06-08 16:18:25 +02:00
b2b4febd31
receiver notifications: don't set all flags, might fail
2013-06-08 16:18:10 +02:00
ad67e6eaee
fix read timeouts in base.py, use seconds everywhere
2013-06-08 16:17:14 +02:00
ed5ce48f65
fixes to polling receiver/device status
2013-06-08 16:16:12 +02:00
f324b97e8b
use GLib.io_add_watch_full when available
2013-06-08 15:02:44 +02:00
46544e1cbe
listen for udev events on the GLib main loop
2013-06-07 14:39:04 +02:00
ffab6c0e12
move Gtk-specific idle_add() and main() into ui
2013-06-07 14:37:03 +02:00
10e736386b
user module __name__ when initializing logger
2013-06-07 14:28:13 +02:00
a1ecebf5bf
documentation and logging for
2013-06-07 14:24:05 +02:00
e09ad373b3
version 0.8.9.2
2013-06-06 12:19:44 +02:00
39a75a6792
AppIndicator: scrolling on the icon cycles through all devices
2013-06-06 10:25:35 +02:00
8900ac9a1f
tweak main window geometry
2013-06-05 13:21:22 +02:00
59459ebbd6
Fix crash in Python3 due to excess space
...
The error message was:
TabError: inconsistent use of tabs and spaces in indentation
2013-06-05 12:39:00 +02:00
c52f2fc069
fix descriptor for K700 keyboard
2013-06-05 01:24:19 +02:00
eb3e2566e9
comment-out unnecessary logs
2013-06-05 00:32:01 +02:00
c186573775
fix register blacklisting
2013-06-05 00:31:40 +02:00
1ed82fc7d5
version 0.8.9.1
2013-06-03 22:02:00 +02:00
162228aff3
started configuration persistence implementation
2013-06-03 22:01:16 +02:00
cbdc0bd99b
very low battery level should trigger an attention event
2013-06-03 21:40:15 +02:00
b4fc36701a
added attention() to tray icon
2013-06-03 21:39:29 +02:00
c706fbc6e7
update icon theme paths directly, don't mess with XDG_DATA_DIRS
2013-06-03 11:17:19 +02:00
88fb8458c1
logging tweaks
2013-06-02 16:16:58 +02:00
b18aee9dba
maintain proper devices order in tray menu
2013-06-02 11:19:49 +02:00
bfe7bcf1b4
avoid possible race condition on device initialization
2013-06-02 11:19:30 +02:00
465fea8a16
dropped solaar-mask unused icon
2013-06-02 01:11:32 +02:00
149758ccab
fixed battery icons in systray menu items
2013-06-02 01:11:04 +02:00
37265f25d8
support custom icons in notification messages
2013-06-01 22:32:57 +02:00
c61eb3f039
show charging status in device icon
2013-06-01 22:08:14 +02:00
39862034e1
use just the battery icon in systray
2013-06-01 21:09:41 +02:00
f938b29040
doc: icon names for various icon themes
2013-06-01 18:53:49 +02:00
82c4b0007c
updated solaar version to 0.8.9
2013-06-01 18:19:47 +02:00
088493dc4f
guess battery icon set from the current theme
2013-06-01 17:34:54 +02:00
7317fad754
some debugging when setting icon theme paths
2013-06-01 15:08:23 +02:00
83a29328c7
don't use notification flags with HID++ 2.0 devices
2013-06-01 15:07:39 +02:00
788fb145af
use an AppIndicator if available, instead of the status icon
2013-06-01 15:06:43 +02:00
b1b1a9b5de
Merge remote-tracking branch 'origin/master'
2013-05-27 16:24:34 +03:00
39e630cece
cli: improve alignment for special keys
...
The following lines have an insane length and are therefore not included in the
longest line:
WIN7_MONITOR_SWITCH_AS_WIN_SHIFT_LEFTARROW=0x0093,
WIN7_MONITOR_SWITCH_AS_WIN_SHIFT_RIGHTARROW=0x0094,
While doing this, also fix an obvious typo in the "Lock PC" control.
2013-05-27 14:07:38 +02:00
b2a62c2dd7
special_keys: update controls list
...
My previous observation was right, controls and tasks are really different
entities. The following "controls" appears to be invalid and have been removed:
Home=0x001A,
Music=0x001D,
Search=0x0029,
Sleep=0x002F,
2013-05-27 11:44:20 +02:00
26dd3a2ca8
only need to set the default window icon once
2013-05-27 12:36:39 +03:00
c328d6f6c6
fixed pairing in solaar-cli
2013-05-27 09:08:23 +03:00
44c79d71d7
use new get_notifications_flags api in solaar-cli
2013-05-27 08:04:49 +03:00
b6bd4b9da0
cli: fix alignment with new feature names
2013-05-26 23:51:46 +02:00
6ae11f862c
Add more feature names, rename existing ones
...
Extracted from SetPoint 6.52.74 software using:
<FeaturesSupported.xml awk -F\" '/<Feature /{sub(/^LD_FID_/, "", $2); printf("\t%s=%s,\n", $2, $4)}' | sort -t= -k2
Existing names are renamed to the newer, verbose names.
2013-05-26 23:47:40 +02:00
28c35633d3
Add more tasks for special keys
...
Based on tasks.xml from `%ProgramFiles%\\SetPointP\\tasks.xml`.
2013-05-26 22:47:03 +02:00
6e36e33b22
Decouple controls from tasks (programmable keys)
...
They are treated differently in the HID++ 2.0 specification. Observations seem
to confirm this difference. For instance, a part of solaar-cli's output:
0: unknown:0022 => Home FN sensitive, is FN, reprogrammable
1: Mail => Mail FN sensitive, is FN, reprogrammable
2: unknown:003E => Search FN sensitive, is FN, reprogrammable
2013-05-26 22:47:03 +02:00
51305e0a21
solaar-cli: fix regression in argument parsing
...
When no hidraw device is given, `solaar-cli` crashes because `None` is being
indirected. Use the correct action (`store`) to avoid indirecting a list.
2013-05-26 20:51:58 +02:00
Javier Torres
Chris Mayo
Peter Wu
Matthew Brabham
Hugo Osvaldo Barrera
Stephen Lyons
mulhern
Marc Belmont
CzBiX
Daniel Serpell
Mikkel Munch Mortensen
Tristin Celestin
Michele Olivo
erik-smit
David Plassmann
Peter Wu
Daniel Pavel